| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A flaw has been found in Tenda F453 1.0.0.3. This affects the function fromPPTPUserSetting of the file /goform/PPTPUserSetting of the component httpd. This manipulation of the argument delno causes stack-based buffer overflow. Remote exploitation of the attack is possible. The exploit has been published and may be used. |
| A vulnerability was found in Tenda 4G06 04.06.01.29. This vulnerability affects the function fromDhcpListClient of the file /goform/DhcpListClient of the component Endpoint. Performing a manipulation of the argument page results in stack-based buffer overflow. The attack can be initiated remotely. The exploit has been made public and could be used. |
| A security flaw has been discovered in Belkin F9K1122 1.00.33. The affected element is the function formCrossBandSwitch of the file /goform/formCrossBandSwitch of the component Parameter Handler. The manipulation of the argument webpage results in stack-based buffer overflow. The attack may be launched remotely. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. |
| A security vulnerability has been detected in Belkin F9K1122 1.00.33. This affects the function formSetSystemSettings of the file /goform/formSetSystemSettings of the component Setting Handler. Such manipulation of the argument webpage leads to stack-based buffer overflow. The attack can be executed remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A flaw has been found in Tenda FH1201 1.2.0.14(408). Affected is the function formWrlExtraSet of the file /goform/WrlExtraSet of the component Parameter Handler. Executing a manipulation of the argument GO can lead to stack-based buffer overflow. The attack may be performed from remote. The exploit has been published and may be used. |
| A weakness has been identified in Wavlink WL-NU516U1 260227. This vulnerability affects the function ftext of the file /cgi-bin/nas.cgi. This manipulation of the argument Content-Length causes stack-based buffer overflow. The attack can be initiated remotely. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. |
| Stack-based buffer overflow vulnerability in Softing Industrial Automation GmbH gateways allows overflow buffers.
This issue affects
pnGate: through 1.30
epGate: through 1.30
mbGate: through 1.30
smartLink HW-DP: through 1.30
smartLink HW-PN: through 1.01. |
| A buffer overflow vulnerability exists in the ONVIF GetStreamUri function of LSC Indoor Camera V7.6.32. The application fails to validate the length of the Protocol parameter inside the Transport element. By sending a specially crafted SOAP request containing an oversized protocol string, an attacker can overflow the stack buffer, overwriting the return instruction pointer (RIP). This vulnerability allows for Denial of Service (DoS) via device crash or Remote Code Execution (RCE) in the context of the ONVIF service. |
| In battery, there is a possible out of bounds write due to a missing bounds check. This could lead to local escalation of privilege if a malicious actor has already obtained the System privilege. User interaction is not needed for exploitation. Patch ID: ALPS10315812; Issue ID: MSV-5534. |
| In Modem, there is a possible system crash due to improper input validation. This could lead to remote denial of service, if a UE has connected to a rogue base station controlled by the attacker, with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: MOLY01689259 / MOLY01586470; Issue ID: MSV-4847. |
| GMT is an open source collection of command-line tools for manipulating geographic and Cartesian data sets. In versions from 6.6.0 and prior, a stack-based buffer overflow vulnerability was identified in the gmt_remote_dataset_id function within src/gmt_remote.c. This issue occurs when a specially crafted long string is passed as a dataset identifier (e.g., via the which module), leading to a crash or potential arbitrary code execution. This issue has been patched via commit 0ad2b49. |
| Aida64 Engineer 6.10.5200 contains a buffer overflow vulnerability in the CSV logging configuration that allows attackers to execute malicious code by crafting a specially designed payload. Attackers can exploit the vulnerability by creating a malformed log file with carefully constructed SEH (Structured Exception Handler) overwrite techniques to achieve remote code execution. |
| The infocmp command-line tool in ncurses before 6.5-20251213 has a stack-based buffer overflow in analyze_string in progs/infocmp.c. |
| A stack-based buffer overflow vulnerability in the P2P API service in BS Producten Petcam with firmware 33.1.0.0818 allows unauthenticated attackers within network range to overwrite the instruction pointer and achieve Remote Code Execution (RCE) by sending a specially crafted HTTP request. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix stack-out-of-bounds write in devmap
get_upper_ifindexes() iterates over all upper devices and writes their
indices into an array without checking bounds.
Also the callers assume that the max number of upper devices is
MAX_NEST_DEV and allocate excluded_devices[1+MAX_NEST_DEV] on the stack,
but that assumption is not correct and the number of upper devices could
be larger than MAX_NEST_DEV (e.g., many macvlans), causing a
stack-out-of-bounds write.
Add a max parameter to get_upper_ifindexes() to avoid the issue.
When there are too many upper devices, return -EOVERFLOW and abort the
redirect.
To reproduce, create more than MAX_NEST_DEV(8) macvlans on a device with
an XDP program attached using BPF_F_BROADCAST | BPF_F_EXCLUDE_INGRESS.
Then send a packet to the device to trigger the XDP redirect path. |
| ipmi-oem in FreeIPMI before 1.16.17 has exploitable buffer overflows on response messages. The Intelligent Platform Management Interface (IPMI) specification defines a set of interfaces for platform management. It is implemented by a large number of hardware manufacturers to support system management. It is most commonly used for sensor reading (e.g., CPU temperatures through the ipmi-sensors command within FreeIPMI) and remote power control (the ipmipower command). The ipmi-oem client command implements a set of a IPMI OEM commands for specific hardware vendors. If a user has supported hardware, they may wish to use the ipmi-oem command to send a request to a server to retrieve specific information. Three subcommands were found to have exploitable buffer overflows on response messages. They are: "ipmi-oem dell get-last-post-code - get the last POST code and string describing the error on some Dell servers," "ipmi-oem supermicro extra-firmware-info - get extra firmware info on Supermicro servers," and "ipmi-oem wistron read-proprietary-string - read a proprietary string on Wistron servers." |
| Mod_gnutls is a TLS module for Apache HTTPD based on GnuTLS. In versions prior to 0.12.3 and 0.13.0, code for client certificate verification imported the certificate chain sent by the client into a fixed size `gnutls_x509_crt_t x509[]` array without checking the number of certificates is less than or equal to the array size. `gnutls_x509_crt_t` is a `typedef` for a pointer to an opaque GnuTLS structure created using with `gnutls_x509_crt_init()` before importing certificate data into it, so no attacker-controlled data was written into the stack buffer, but writing a pointer after the last array element generally triggered a segfault, and could theoretically cause stack corruption otherwise (not observed in practice). Server configurations that do not use client certificates (`GnuTLSClientVerify ignore`, the default) are not affected. The problem has been fixed in version 0.12.3 by checking the length of the provided certificate chain and rejecting it if it exceeds the buffer length, and in version 0.13.0 by rewriting certificate verification to use `gnutls_certificate_verify_peers()`, removing the need for the buffer entirely. There is no workaround. Version 0.12.3 provides the minimal fix for users of 0.12.x who do not wish to upgrade to 0.13.0 yet. |
| Freeciv21 is a free open source, turn-based, empire-building strategy game. Versions prior to 3.1.1 crash with a stack overflow when receiving specially-crafted packets. A remote attacker can use this to take down any public server. A malicious server can use this to crash the game on the player's machine. Authentication is not needed and, by default, logs do not contain any useful information. All users should upgrade to Freeciv21 version 3.1.1. Running the server behind a firewall can help mitigate the issue for non-public servers. For local games, Freeciv21 restricts connections to the current user and is therefore not affected. |
| Product Key Explorer 4.2.0.0 contains a denial of service vulnerability that allows local attackers to crash the application by overflowing the registration name input field. Attackers can create a specially crafted text file with repeated characters to trigger a buffer overflow when pasted into the registration name field, causing the application to crash. |
| A flaw has been found in Belkin F9K1122 1.00.33. The affected element is the function formWISP5G of the file /goform/formWISP5G. Executing a manipulation of the argument webpage can lead to stack-based buffer overflow. The attack can be launched remotely. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
