| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A Heap-based Buffer Overflow vulnerability in the flexible PIC concentrator (FPC) of Juniper Networks Junos OS on EX2300, EX3400, EX4100, EX4300, EX4300MP, EX4400, EX4600, EX4650-48Y, and QFX5k Series allows an attacker to send a specific DHCP packet to the device, leading to an FPC crash and restart, resulting in a Denial of Service (DoS). Continued receipt and processing of this packet will create a sustained Denial of Service (DoS) condition.
Under a rare timing scenario outside the attacker's control, memory corruption may be observed when DHCP Option 82 is enabled, leading to an FPC crash and affecting packet forwarding. Due to the nature of the heap-based overflow, exploitation of this vulnerability could also lead to remote code execution within the FPC, resulting in complete control of the vulnerable component.
This issue affects Junos OS on EX2300, EX3400, EX4100, EX4300, EX4300MP, EX4400, EX4600, EX4650-48Y, and QFX5k Series:
* All versions before 21.4R3-S9,
* from 22.2 before 22.2R3-S5,
* from 22.4 before 22.4R3-S5,
* from 23.2 before 23.2R2-S3,
* from 23.4 before 23.4R2-S3,
* from 24.2 before 24.2R2. |
| An Uncontrolled Resource Consumption vulnerability in the http daemon (httpd) of Juniper Networks Junos OS on SRX Series, QFX Series, MX Series and EX Series allows an unauthenticated, network-based attacker to cause Denial-of-Service (DoS).
An attacker can send specific HTTPS connection requests to the device, triggering the creation of processes that are not properly terminated. Over time, this leads to resource exhaustion, ultimately causing the device to crash and restart.
The following command can be used to monitor the resource usage:
user@host> show system processes extensive | match mgd | count
This issue affects Junos OS on SRX Series and EX Series:
All versions before 21.4R3-S7,
from 22.2 before 22.2R3-S4,
from 22.3 before 22.3R3-S3,
from 22.4 before 22.4R3-S2,
from 23.2 before 23.2R2-S1,
from 23.4 before 23.4R1-S2, 23.4R2. |
| A NULL Pointer Dereference vulnerability in the chassis daemon (chassisd) of Juniper Networks Junos OS on MX, SRX and EX Series allows a local attacker with low privileges to cause a Denial-of-Service (DoS).
When a user executes the 'show chassis' command with specifically crafted options, chassisd will crash and restart. Due to this all components but the Routing Engine (RE) in the chassis are reinitialized, which leads to a complete service outage, which the system automatically recovers from.
This issue affects:
Junos OS on MX, SRX and EX Series:
* all versions before 22.4R3-S8,
* 23.2 versions before 23.2R2-S5,
* 23.4 versions before 23.4R2-S6,
* 24.2 versions before 24.2R2-S2,
* 24.4 versions before 24.4R2. |
| An Origin Validation Error vulnerability in an insufficient protected file of Juniper Networks Junos OS on EX4600 Series and QFX5000 Series allows an unauthenticated attacker with physical access to the device to create a backdoor which allows complete control of the system.
When a device isn't configured with a root password, an attacker can modify a specific file. It's contents will be added to the Junos configuration of the device without being visible. This allows for the addition of any configuration unknown
to the actual operator, which includes users, IP addresses and other configuration which could allow unauthorized access to the device.
This exploit is persistent across reboots and even zeroization.
The indicator of compromise is a modified /etc/config/<platform>-defaults[-flex].conf file. Review that file for unexpected configuration statements, or compare it to an unmodified version which can be extracted from the original Juniper software image file. For details on the extraction procedure please contact Juniper Technical Assistance Center (JTAC).
To restore the device to a trusted initial configuration the system needs to be reinstalled from physical media.
This issue affects Junos OS on EX4600 Series and QFX5000 Series:
* All versions before 21.4R3,
* 22.2 versions before 22.2R3-S3. |
| An Improper Neutralization of Data within XPath Expressions ('XPath Injection') vulnerability in J-Web shipped with Juniper Networks Junos OS allows an unauthenticated, network-based attacker to execute remote commands on the target device.
While an administrator is logged into a J-Web session or has previously logged in and subsequently logged out of their J-Web session, the attacker can arbitrarily execute commands on the target device with the other user's credentials. In the worst case, the attacker will have full control over the device.
This issue affects Junos OS:
* All versions before 21.2R3-S8,
* from 21.4 before 21.4R3-S7,
* from 22.2 before 22.2R3-S4,
* from 22.3 before 22.3R3-S3,
* from 22.4 before 22.4R3-S2,
* from 23.2 before 23.2R2,
* from 23.4 before 23.4R1-S1, 23.4R2. |
| An Unimplemented or Unsupported Feature in the UI vulnerability in Juniper Networks Junos OS on QFX5000 Series and EX4600 Series allows an unauthenticated, network-based attacker to cause a minor integrity impact to downstream networks.If one or more of the following match conditions
ip-source-address
ip-destination-address
arp-type
which are not supported for this type of filter, are used in an ethernet switching filter, and then this filter is applied as an output filter, the configuration can be committed but the filter will not be in effect.
This issue affects Junos OS on QFX5000 Series and EX4600 Series:
* All version before 21.2R3-S7,
* 21.4 versions before 21.4R3-S6,
* 22.1 versions before 22.1R3-S5,
* 22.2 versions before 22.2R3-S3,
* 22.3 versions before 22.3R3-S2,
* 22.4 versions before 22.4R3,
* 23.2 versions before 23.2R2.
Please note that the implemented fix ensures these unsupported match conditions cannot be committed anymore. |
| A PHP External Variable Modification vulnerability in J-Web of Juniper Networks Junos OS on EX Series allows an unauthenticated, network-based attacker to control certain, important environment variables.
Using a crafted request an attacker is able to modify
certain PHP environment variables leading to partial loss of integrity, which may allow chaining to other vulnerabilities.
This issue affects Juniper Networks Junos OS on EX Series:
* All versions prior to 20.4R3-S9;
* 21.1 versions 21.1R1 and later;
* 21.2 versions prior to 21.2R3-S7;
* 21.3 versions
prior to
21.3R3-S5;
* 21.4 versions
prior to
21.4R3-S5;
* 22.1 versions
prior to
22.1R3-S4;
* 22.2 versions
prior to
22.2R3-S2;
* 22.3 versions
prior to 22.3R3-S1;
* 22.4 versions
prior to
22.4R2-S2, 22.4R3;
* 23.2 versions prior to
23.2R1-S1, 23.2R2. |
| A Missing Authentication for Critical Function vulnerability in Juniper Networks Junos OS on EX Series allows an unauthenticated, network-based attacker to cause limited impact to the file system integrity.
With a specific request to installAppPackage.php that doesn't require authentication an attacker is able to upload arbitrary files via J-Web, leading to a loss of
integrity
for a certain
part of the file system, which may allow chaining to other vulnerabilities.
This issue affects Juniper Networks Junos OS on EX Series:
* All versions prior to 20.4R3-S8;
* 21.1 versions 21.1R1 and later;
* 21.2 versions prior to 21.2R3-S6;
* 21.3 versions
prior to
21.3R3-S5;
* 21.4 versions
prior to
21.4R3-S4;
* 22.1 versions
prior to
22.1R3-S3;
* 22.2 versions
prior to
22.2R3-S1;
* 22.3 versions
prior to
22.3R2-S2, 22.3R3;
* 22.4 versions
prior to
22.4R2-S1, 22.4R3.
|
| A Missing Authentication for Critical Function vulnerability in Juniper Networks Junos OS on SRX Series allows an unauthenticated, network-based attacker to cause limited impact to the file system integrity.
With a specific request to
webauth_operation.php
that doesn't require authentication, an attacker is able to upload and download arbitrary files via J-Web, leading to a loss of
integrity or confidentiality, which may allow chaining to other vulnerabilities.
This issue affects Juniper Networks Junos OS on SRX Series:
*
21.2 versions prior to 21.2R3-S8;
* 21.4
versions prior to
21.4R3-S6;
* 22.1
versions prior to
22.1R3-S5;
* 22.2
versions prior to
22.2R3-S3;
* 22.3
versions prior to
22.3R3-S2;
* 22.4 versions prior to 22,4R2-S2, 22.4R3;
* 23.2 versions prior to
23.2R1-S2, 23.2R2.
|
| A Missing Authentication for Critical Function vulnerability combined with a Generation of Error Message Containing Sensitive Information vulnerability in J-Web of Juniper Networks Junos OS on SRX Series and EX Series allows an unauthenticated, network-based attacker to access sensitive system information.
When a user logs in, a temporary file which contains the configuration of the device (as visible to that user) is created in the /cache folder. An unauthenticated attacker can then attempt to access such a file by sending a specific request to the device trying to guess the name of such a file. Successful exploitation will reveal configuration information.
This issue affects Juniper Networks Junos OS on SRX Series and EX Series:
* All versions earlier than 20.4R3-S9;
* 21.2 versions earlier than 21.2R3-S7;
* 21.3 versions earlier than 21.3R3-S5;
* 21.4 versions earlier than 21.4R3-S6;
* 22.1 versions earlier than 22.1R3-S5;
* 22.2 versions earlier than 22.2R3-S3;
* 22.3 versions earlier than 22.3R3-S2;
* 22.4 versions earlier than 22.4R3;
* 23.2 versions earlier than 23.2R1-S2, 23.2R2.
|
| An Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in J-Web of Juniper Networks Junos OS on SRX Series and EX Series allows an attacker to construct a URL that when visited by another user enables the attacker to execute commands with the target's permissions, including an administrator.
A specific invocation of the emit_debug_note method in webauth_operation.php will echo back the data it receives.
This issue affects Juniper Networks Junos OS on SRX Series and EX Series:
* All versions earlier than 20.4R3-S10;
* 21.2 versions earlier than 21.2R3-S8;
* 21.4 versions earlier than 21.4R3-S6;
* 22.1 versions earlier than 22.1R3-S5;
* 22.2 versions earlier than 22.2R3-S3;
* 22.3 versions earlier than 22.3R3-S2;
* 22.4 versions earlier than 22.4R3-S1;
* 23.2 versions earlier than 23.2R2;
* 23.4 versions earlier than 23.4R2.
|
| In VxLAN scenarios on EX4300-MP, EX4600, QFX5000 Series devices an Uncontrolled Memory Allocation vulnerability in the Packet Forwarding Engine (PFE) of Juniper Networks Junos OS allows an unauthenticated adjacently located attacker sending specific packets to cause a Denial of Service (DoS) condition by crashing one or more PFE's when they are received and processed by the device. Upon automatic restart of the PFE, continued processing of these packets will cause the memory leak to reappear. Depending on the volume of packets received the attacker may be able to create a sustained Denial of Service (DoS) condition. This issue affects: Juniper Networks Junos OS on EX4300-MP, EX4600, QFX5000 Series: 17.1 version 17.1R1 and later versions prior to 17.3R3-S12; 17.4 versions prior to 17.4R2-S13, 17.4R3-S5; 18.1 versions prior to 18.1R3-S13; 18.2 versions prior to 18.2R3-S8; 18.3 versions prior to 18.3R3-S5; 18.4 versions prior to 18.4R1-S8, 18.4R2-S6, 18.4R3-S6; 19.1 versions prior to 19.1R3-S4; 19.2 versions prior to 19.2R1-S7, 19.2R3-S1; 19.3 versions prior to 19.3R2-S6, 19.3R3-S1; 19.4 versions prior to 19.4R1-S4, 19.4R2-S4, 19.4R3-S1; 20.1 versions prior to 20.1R2; 20.2 versions prior to 20.2R2-S3, 20.2R3; 20.3 versions prior to 20.3R2. This issue does not affect Junos OS versions prior to 17.1R1. |
| Juniper Networks QFX3500, QFX3600, QFX5100, QFX5200, EX4300 and EX4600 devices running Junos OS 14.1X53 prior to 14.1X53-D40, 15.1X53 prior to 15.1X53-D40, 15.1 prior to 15.1R2, do not pad Ethernet packets with zeros, and thus some packets can contain fragments of system memory or data from previous packets. This issue is also known as 'Etherleak' |
| An insufficient authentication vulnerability on platforms where Junos OS instances are run in a virtualized environment, may allow unprivileged users on the Junos OS instance to gain access to the host operating environment, and thus escalate privileges. Affected releases are Juniper Networks Junos OS 14.1X53 prior to 14.1X53-D40 on QFX5110, QFX5200, QFX10002, QFX10008, QFX10016, EX4600 and NFX250; 15.1 prior to 15.1R5 on EX4600; 15.1X49 prior to 15.1X49-D70 on vSRX, SRX1500, SRX4100, SRX4200; 16.1 prior to 16.1R2 on EX4600, ACX5000 series. This issue does not affect vMX. No other Juniper Networks products or platforms are affected by this issue. |
| A vulnerability in the pluggable authentication module (PAM) of Juniper Networks Junos OS may allow an unauthenticated network based attacker to potentially execute arbitrary code or crash daemons such as telnetd or sshd that make use of PAM. Affected Juniper Networks Junos OS releases are: 14.1 from 14.1R5 prior to 14.1R8-S4, 14.1R9; 14.1X53 prior to 14.1X53-D50 on EX and QFX series; 14.2 from 14.2R3 prior to 14.2R7-S8, 14.2R8; No other Junos OS releases are affected by this issue. No other Juniper Networks products are affected by this issue. |
| The Juniper EX4600, QFX3500, QFX3600, and QFX5100 switches with Junos 13.2X51-D15 through 13.2X51-D25, 13.2X51 before 13.2X51-D30, and 14.1X53 before 14.1X53-D10 allows remote attackers to cause a denial of service (CPU consumption) via unspecified vectors. |
| Embedthis Appweb before 4.6.6 and 5.x before 5.2.1 allows remote attackers to cause a denial of service (NULL pointer dereference) via a Range header with an empty value, as demonstrated by "Range: x=,". |
| An Improper Preservation of Consistency Between Independent Representations of Shared State vulnerability in the Packet Forwarding Engine (PFE) of Juniper Networks Junos OS allows an adjacent, unauthenticated attacker to cause a Denial of Service (DoS) to device due to out of resources. When a device is configured with "service-provider/SP style" switching, and mac-limiting is configured on an Aggregated Ethernet (ae) interface, and then a PFE is restarted or the device is rebooted, mac-limiting doesn't work anymore. Please note that the issue might not be apparent as traffic will continue to flow through the device although the mac table and respective logs will indicate that mac limit is reached. Functionality can be restored by removing and re-adding the MAC limit configuration. This issue affects Juniper Networks Junos OS on QFX5k Series, EX46xx Series: All versions prior to 20.2R3-S5; 20.3 versions prior to 20.3R3-S5; 20.4 versions prior to 20.4R3-S4; 21.1 versions prior to 21.1R3-S3; 21.2 versions prior to 21.2R3-S1; 21.3 versions prior to 21.3R3 on; 21.4 versions prior to 21.4R3 on; 22.1 versions prior to 22.1R2 on. |
|
An Improper Validation of Syntactic Correctness of Input vulnerability in the Packet Forwarding Engine (PFE) of Juniper Networks Junos OS allows a network-based, unauthenticated attacker to cause a Denial of Service (DoS).
If an attacker sends high rate of specific ICMP traffic to a device with VXLAN configured, this causes a deadlock of the PFE and results in the device becoming unresponsive. A manual restart will be required to recover the device.
This issue only affects EX4100, EX4400, EX4600, QFX5000 Series devices.
This issue affects:
Juniper Networks Junos OS
* 21.4R3 versions earlier than 21.4R3-S4;
* 22.1R3 versions earlier than 22.1R3-S3;
* 22.2R2 versions earlier than 22.2R3-S1;
* 22.3 versions earlier than 22.3R2-S2, 22.3R3;
* 22.4 versions earlier than 22.4R2;
* 23.1 versions earlier than 23.1R2.
|
|
An Improper Check or Handling of Exceptional Conditions vulnerability in the Packet Forwarding Engine (pfe) of Juniper Networks Junos OS on QFX5000 Series, EX2300, EX3400, EX4100, EX4400 and EX4600 allows a adjacent attacker to send specific traffic, which leads to packet flooding, resulting in a Denial of Service (DoS).
When a specific IGMP packet is received in an isolated VLAN, it is duplicated to all other ports under the primary VLAN, which causes a flood.
This issue affects QFX5000 series, EX2300, EX3400, EX4100, EX4400 and EX4600 platforms only.
This issue affects Juniper Junos OS on on QFX5000 Series, EX2300, EX3400, EX4100, EX4400 and EX4600:
* All versions prior to 20.4R3-S5;
* 21.1 versions prior to 21.1R3-S4;
* 21.2 versions prior to 21.2R3-S3;
* 21.3 versions prior to 21.3R3-S5;
* 21.4 versions prior to 21.4R3-S2;
* 22.1 versions prior to 22.1R3;
* 22.2 versions prior to 22.2R3;
* 22.3 versions prior to 22.3R2.
|
