| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability was found in Buildah. Cache mounts do not properly validate that user-specified paths for the cache are within our cache directory, allowing a `RUN` instruction in a Container file to mount an arbitrary directory from the host (read/write) into the container as long as those files can be accessed by the user running Buildah. |
| Delta Electronics CNCSoft-G2 lacks proper validation of the user-supplied file. If a user opens a malicious file, an attacker can leverage this vulnerability to execute code in the context of the current process. |
| Delta Electronics CNCSoft-G2 lacks proper validation of the user-supplied file. If a user opens a malicious file, an attacker can leverage this vulnerability to execute code in the context of the current process. |
| Delta Electronics CNCSoft-G2 lacks proper validation of the user-supplied file. If a user opens a malicious file, an attacker can leverage this vulnerability to execute code in the context of the current process. |
| Further research determined the issue originates from a different product. |
| Further research determined the issue originates from a different product. |
| Further research determined the issue originates from a different product. |
| A Cross-site request forgery vulnerability exists in ipa/session/login_password in all supported versions of IPA. This flaw allows an attacker to trick the user into submitting a request that could perform actions as the user, resulting in a loss of confidentiality and system integrity. During community penetration testing it was found that for certain HTTP end-points FreeIPA does not ensure CSRF protection. Due to implementation details one cannot use this flaw for reflection of a cookie representing already logged-in user. An attacker would always have to go through a new authentication attempt. |
| A NULL pointer dereference vulnerability has been reported to affect several QNAP operating system versions. The remote attackers can then exploit the vulnerability to launch a denial-of-service (DoS) attack.
We have already fixed the vulnerability in the following versions:
QTS 5.2.7.3297 build 20251024 and later
QuTS hero h5.2.7.3297 build 20251024 and later
QuTS hero h5.3.1.3292 build 20251024 and later |
| A flaw was found in uv. This vulnerability allows an attacker to execute malicious code during package resolution or installation via specially crafted ZIP (Zipped Information Package) archives that exploit parsing differentials, requiring user interaction to install an attacker-controlled package. |
| A flaw was found in Red Hat AMQ Broker Operator, where it displayed a password defined in ActiveMQArtemisAddress CR, shown in plain text in the Operator Log. This flaw allows an authenticated local attacker to access information outside of their permissions. |
| A flaw was found in Ansible-Core. This vulnerability allows attackers to bypass unsafe content protections using the hostvars object to reference and execute templated content. This issue can lead to arbitrary code execution if remote data or module outputs are improperly templated within playbooks. |
| A flaw was found in OpenShift's Telemeter. If certain conditions are in place, an attacker can use a forged token to bypass the issue ("iss") check during JSON web token (JWT) authentication. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Fix bsg_done() causing double free
Kernel panic observed on system,
[5353358.825191] BUG: unable to handle page fault for address: ff5f5e897b024000
[5353358.825194] #PF: supervisor write access in kernel mode
[5353358.825195] #PF: error_code(0x0002) - not-present page
[5353358.825196] PGD 100006067 P4D 0
[5353358.825198] Oops: 0002 [#1] PREEMPT SMP NOPTI
[5353358.825200] CPU: 5 PID: 2132085 Comm: qlafwupdate.sub Kdump: loaded Tainted: G W L ------- --- 5.14.0-503.34.1.el9_5.x86_64 #1
[5353358.825203] Hardware name: HPE ProLiant DL360 Gen11/ProLiant DL360 Gen11, BIOS 2.44 01/17/2025
[5353358.825204] RIP: 0010:memcpy_erms+0x6/0x10
[5353358.825211] RSP: 0018:ff591da8f4f6b710 EFLAGS: 00010246
[5353358.825212] RAX: ff5f5e897b024000 RBX: 0000000000007090 RCX: 0000000000001000
[5353358.825213] RDX: 0000000000001000 RSI: ff591da8f4fed090 RDI: ff5f5e897b024000
[5353358.825214] RBP: 0000000000010000 R08: ff5f5e897b024000 R09: 0000000000000000
[5353358.825215] R10: ff46cf8c40517000 R11: 0000000000000001 R12: 0000000000008090
[5353358.825216] R13: ff591da8f4f6b720 R14: 0000000000001000 R15: 0000000000000000
[5353358.825218] FS: 00007f1e88d47740(0000) GS:ff46cf935f940000(0000) knlGS:0000000000000000
[5353358.825219] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[5353358.825220] CR2: ff5f5e897b024000 CR3: 0000000231532004 CR4: 0000000000771ef0
[5353358.825221] PKRU: 55555554
[5353358.825222] Call Trace:
[5353358.825223] <TASK>
[5353358.825224] ? show_trace_log_lvl+0x1c4/0x2df
[5353358.825229] ? show_trace_log_lvl+0x1c4/0x2df
[5353358.825232] ? sg_copy_buffer+0xc8/0x110
[5353358.825236] ? __die_body.cold+0x8/0xd
[5353358.825238] ? page_fault_oops+0x134/0x170
[5353358.825242] ? kernelmode_fixup_or_oops+0x84/0x110
[5353358.825244] ? exc_page_fault+0xa8/0x150
[5353358.825247] ? asm_exc_page_fault+0x22/0x30
[5353358.825252] ? memcpy_erms+0x6/0x10
[5353358.825253] sg_copy_buffer+0xc8/0x110
[5353358.825259] qla2x00_process_vendor_specific+0x652/0x1320 [qla2xxx]
[5353358.825317] qla24xx_bsg_request+0x1b2/0x2d0 [qla2xxx]
Most routines in qla_bsg.c call bsg_done() only for success cases.
However a few invoke it for failure case as well leading to a double
free. Validate before calling bsg_done(). |
| In the Linux kernel, the following vulnerability has been resolved:
Revert "f2fs: block cache/dio write during f2fs_enable_checkpoint()"
This reverts commit 196c81fdd438f7ac429d5639090a9816abb9760a.
Original patch may cause below deadlock, revert it.
write remount
- write_begin
- lock_page --- lock A
- prepare_write_begin
- f2fs_map_lock
- f2fs_enable_checkpoint
- down_write(cp_enable_rwsem) --- lock B
- sync_inode_sb
- writepages
- lock_page --- lock A
- down_read(cp_enable_rwsem) --- lock A |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to avoid mapping wrong physical block for swapfile
Xiaolong Guo reported a f2fs bug in bugzilla [1]
[1] https://bugzilla.kernel.org/show_bug.cgi?id=220951
Quoted:
"When using stress-ng's swap stress test on F2FS filesystem with kernel 6.6+,
the system experiences data corruption leading to either:
1 dm-verity corruption errors and device reboot
2 F2FS node corruption errors and boot hangs
The issue occurs specifically when:
1 Using F2FS filesystem (ext4 is unaffected)
2 Swapfile size is less than F2FS section size (2MB)
3 Swapfile has fragmented physical layout (multiple non-contiguous extents)
4 Kernel version is 6.6+ (6.1 is unaffected)
The root cause is in check_swap_activate() function in fs/f2fs/data.c. When the
first extent of a small swapfile (< 2MB) is not aligned to section boundaries,
the function incorrectly treats it as the last extent, failing to map
subsequent extents. This results in incorrect swap_extent creation where only
the first extent is mapped, causing subsequent swap writes to overwrite wrong
physical locations (other files' data).
Steps to Reproduce
1 Setup a device with F2FS-formatted userdata partition
2 Compile stress-ng from https://github.com/ColinIanKing/stress-ng
3 Run swap stress test: (Android devices)
adb shell "cd /data/stressng; ./stress-ng-64 --metrics-brief --timeout 60
--swap 0"
Log:
1 Ftrace shows in kernel 6.6, only first extent is mapped during second
f2fs_map_blocks call in check_swap_activate():
stress-ng-swap-8990: f2fs_map_blocks: ino=11002, file offset=0, start
blkaddr=0x43143, len=0x1
(Only 4KB mapped, not the full swapfile)
2 in kernel 6.1, both extents are correctly mapped:
stress-ng-swap-5966: f2fs_map_blocks: ino=28011, file offset=0, start
blkaddr=0x13cd4, len=0x1
stress-ng-swap-5966: f2fs_map_blocks: ino=28011, file offset=1, start
blkaddr=0x60c84b, len=0xff
The problematic code is in check_swap_activate():
if ((pblock - SM_I(sbi)->main_blkaddr) % blks_per_sec ||
nr_pblocks % blks_per_sec ||
!f2fs_valid_pinned_area(sbi, pblock)) {
bool last_extent = false;
not_aligned++;
nr_pblocks = roundup(nr_pblocks, blks_per_sec);
if (cur_lblock + nr_pblocks > sis->max)
nr_pblocks -= blks_per_sec;
/* this extent is last one */
if (!nr_pblocks) {
nr_pblocks = last_lblock - cur_lblock;
last_extent = true;
}
ret = f2fs_migrate_blocks(inode, cur_lblock, nr_pblocks);
if (ret) {
if (ret == -ENOENT)
ret = -EINVAL;
goto out;
}
if (!last_extent)
goto retry;
}
When the first extent is unaligned and roundup(nr_pblocks, blks_per_sec)
exceeds sis->max, we subtract blks_per_sec resulting in nr_pblocks = 0. The
code then incorrectly assumes this is the last extent, sets nr_pblocks =
last_lblock - cur_lblock (entire swapfile), and performs migration. After
migration, it doesn't retry mapping, so subsequent extents are never processed.
"
In order to fix this issue, we need to lookup block mapping info after
we migrate all blocks in the tail of swapfile. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to avoid UAF in f2fs_write_end_io()
As syzbot reported an use-after-free issue in f2fs_write_end_io().
It is caused by below race condition:
loop device umount
- worker_thread
- loop_process_work
- do_req_filebacked
- lo_rw_aio
- lo_rw_aio_complete
- blk_mq_end_request
- blk_update_request
- f2fs_write_end_io
- dec_page_count
- folio_end_writeback
- kill_f2fs_super
- kill_block_super
- f2fs_put_super
: free(sbi)
: get_pages(, F2FS_WB_CP_DATA)
accessed sbi which is freed
In kill_f2fs_super(), we will drop all page caches of f2fs inodes before
call free(sbi), it guarantee that all folios should end its writeback, so
it should be safe to access sbi before last folio_end_writeback().
Let's relocate ckpt thread wakeup flow before folio_end_writeback() to
resolve this issue. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix out-of-bounds access in sysfs attribute read/write
Some f2fs sysfs attributes suffer from out-of-bounds memory access and
incorrect handling of integer values whose size is not 4 bytes.
For example:
vm:~# echo 65537 > /sys/fs/f2fs/vde/carve_out
vm:~# cat /sys/fs/f2fs/vde/carve_out
65537
vm:~# echo 4294967297 > /sys/fs/f2fs/vde/atgc_age_threshold
vm:~# cat /sys/fs/f2fs/vde/atgc_age_threshold
1
carve_out maps to {struct f2fs_sb_info}->carve_out, which is a 8-bit
integer. However, the sysfs interface allows setting it to a value
larger than 255, resulting in an out-of-range update.
atgc_age_threshold maps to {struct atgc_management}->age_threshold,
which is a 64-bit integer, but its sysfs interface cannot correctly set
values larger than UINT_MAX.
The root causes are:
1. __sbi_store() treats all default values as unsigned int, which
prevents updating integers larger than 4 bytes and causes out-of-bounds
writes for integers smaller than 4 bytes.
2. f2fs_sbi_show() also assumes all default values are unsigned int,
leading to out-of-bounds reads and incorrect access to integers larger
than 4 bytes.
This patch introduces {struct f2fs_attr}->size to record the actual size
of the integer associated with each sysfs attribute. With this
information, sysfs read and write operations can correctly access and
update values according to their real data size, avoiding memory
corruption and truncation. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: fix dead lock while flushing management frames
Commit [1] converted the management transmission work item into a
wiphy work. Since a wiphy work can only run under wiphy lock
protection, a race condition happens in below scenario:
1. a management frame is queued for transmission.
2. ath12k_mac_op_flush() gets called to flush pending frames associated
with the hardware (i.e, vif being NULL). Then in ath12k_mac_flush()
the process waits for the transmission done.
3. Since wiphy lock has been taken by the flush process, the transmission
work item has no chance to run, hence the dead lock.
>From user view, this dead lock results in below issue:
wlp8s0: authenticate with xxxxxx (local address=xxxxxx)
wlp8s0: send auth to xxxxxx (try 1/3)
wlp8s0: authenticate with xxxxxx (local address=xxxxxx)
wlp8s0: send auth to xxxxxx (try 1/3)
wlp8s0: authenticated
wlp8s0: associate with xxxxxx (try 1/3)
wlp8s0: aborting association with xxxxxx by local choice (Reason: 3=DEAUTH_LEAVING)
ath12k_pci 0000:08:00.0: failed to flush mgmt transmit queue, mgmt pkts pending 1
The dead lock can be avoided by invoking wiphy_work_flush() to proactively
run the queued work item. Note actually it is already present in
ath12k_mac_op_flush(), however it does not protect the case where vif
being NULL. Hence move it ahead to cover this case as well.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00302-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.115823.3 |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: hp-bioscfg: Fix kobject warnings for empty attribute names
The hp-bioscfg driver attempts to register kobjects with empty names when
the HP BIOS returns attributes with empty name strings. This causes
multiple kernel warnings:
kobject: (00000000135fb5e6): attempted to be registered with empty name!
WARNING: CPU: 14 PID: 3336 at lib/kobject.c:219 kobject_add_internal+0x2eb/0x310
Add validation in hp_init_bios_buffer_attribute() to check if the
attribute name is empty after parsing it from the WMI buffer. If empty,
log a debug message and skip registration of that attribute, allowing the
module to continue processing other valid attributes. |
