| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
media: uvcvideo: Remove dangling pointers
When an async control is written, we copy a pointer to the file handle
that started the operation. That pointer will be used when the device is
done. Which could be anytime in the future.
If the user closes that file descriptor, its structure will be freed,
and there will be one dangling pointer per pending async control, that
the driver will try to use.
Clean all the dangling pointers during release().
To avoid adding a performance penalty in the most common case (no async
operation), a counter has been introduced with some logic to make sure
that it is properly handled. |
| In the Linux kernel, the following vulnerability has been resolved:
pps: Fix a use-after-free
On a board running ntpd and gpsd, I'm seeing a consistent use-after-free
in sys_exit() from gpsd when rebooting:
pps pps1: removed
------------[ cut here ]------------
kobject: '(null)' (00000000db4bec24): is not initialized, yet kobject_put() is being called.
WARNING: CPU: 2 PID: 440 at lib/kobject.c:734 kobject_put+0x120/0x150
CPU: 2 UID: 299 PID: 440 Comm: gpsd Not tainted 6.11.0-rc6-00308-gb31c44928842 #1
Hardware name: Raspberry Pi 4 Model B Rev 1.1 (DT)
pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : kobject_put+0x120/0x150
lr : kobject_put+0x120/0x150
sp : ffffffc0803d3ae0
x29: ffffffc0803d3ae0 x28: ffffff8042dc9738 x27: 0000000000000001
x26: 0000000000000000 x25: ffffff8042dc9040 x24: ffffff8042dc9440
x23: ffffff80402a4620 x22: ffffff8042ef4bd0 x21: ffffff80405cb600
x20: 000000000008001b x19: ffffff8040b3b6e0 x18: 0000000000000000
x17: 0000000000000000 x16: 0000000000000000 x15: 696e6920746f6e20
x14: 7369203a29343263 x13: 205d303434542020 x12: 0000000000000000
x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000
x8 : 0000000000000000 x7 : 0000000000000000 x6 : 0000000000000000
x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000
x2 : 0000000000000000 x1 : 0000000000000000 x0 : 0000000000000000
Call trace:
kobject_put+0x120/0x150
cdev_put+0x20/0x3c
__fput+0x2c4/0x2d8
____fput+0x1c/0x38
task_work_run+0x70/0xfc
do_exit+0x2a0/0x924
do_group_exit+0x34/0x90
get_signal+0x7fc/0x8c0
do_signal+0x128/0x13b4
do_notify_resume+0xdc/0x160
el0_svc+0xd4/0xf8
el0t_64_sync_handler+0x140/0x14c
el0t_64_sync+0x190/0x194
---[ end trace 0000000000000000 ]---
...followed by more symptoms of corruption, with similar stacks:
refcount_t: underflow; use-after-free.
kernel BUG at lib/list_debug.c:62!
Kernel panic - not syncing: Oops - BUG: Fatal exception
This happens because pps_device_destruct() frees the pps_device with the
embedded cdev immediately after calling cdev_del(), but, as the comment
above cdev_del() notes, fops for previously opened cdevs are still
callable even after cdev_del() returns. I think this bug has always
been there: I can't explain why it suddenly started happening every time
I reboot this particular board.
In commit d953e0e837e6 ("pps: Fix a use-after free bug when
unregistering a source."), George Spelvin suggested removing the
embedded cdev. That seems like the simplest way to fix this, so I've
implemented his suggestion, using __register_chrdev() with pps_idr
becoming the source of truth for which minor corresponds to which
device.
But now that pps_idr defines userspace visibility instead of cdev_add(),
we need to be sure the pps->dev refcount can't reach zero while
userspace can still find it again. So, the idr_remove() call moves to
pps_unregister_cdev(), and pps_idr now holds a reference to pps->dev.
pps_core: source serial1 got cdev (251:1)
<...>
pps pps1: removed
pps_core: unregistering pps1
pps_core: deallocating pps1 |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: ufs: bsg: Set bsg_queue to NULL after removal
Currently, this does not cause any issues, but I believe it is necessary to
set bsg_queue to NULL after removing it to prevent potential use-after-free
(UAF) access. |
| In the Linux kernel, the following vulnerability has been resolved:
block, bfq: fix bfqq uaf in bfq_limit_depth()
Set new allocated bfqq to bic or remove freed bfqq from bic are both
protected by bfqd->lock, however bfq_limit_depth() is deferencing bfqq
from bic without the lock, this can lead to UAF if the io_context is
shared by multiple tasks.
For example, test bfq with io_uring can trigger following UAF in v6.6:
==================================================================
BUG: KASAN: slab-use-after-free in bfqq_group+0x15/0x50
Call Trace:
<TASK>
dump_stack_lvl+0x47/0x80
print_address_description.constprop.0+0x66/0x300
print_report+0x3e/0x70
kasan_report+0xb4/0xf0
bfqq_group+0x15/0x50
bfqq_request_over_limit+0x130/0x9a0
bfq_limit_depth+0x1b5/0x480
__blk_mq_alloc_requests+0x2b5/0xa00
blk_mq_get_new_requests+0x11d/0x1d0
blk_mq_submit_bio+0x286/0xb00
submit_bio_noacct_nocheck+0x331/0x400
__block_write_full_folio+0x3d0/0x640
writepage_cb+0x3b/0xc0
write_cache_pages+0x254/0x6c0
write_cache_pages+0x254/0x6c0
do_writepages+0x192/0x310
filemap_fdatawrite_wbc+0x95/0xc0
__filemap_fdatawrite_range+0x99/0xd0
filemap_write_and_wait_range.part.0+0x4d/0xa0
blkdev_read_iter+0xef/0x1e0
io_read+0x1b6/0x8a0
io_issue_sqe+0x87/0x300
io_wq_submit_work+0xeb/0x390
io_worker_handle_work+0x24d/0x550
io_wq_worker+0x27f/0x6c0
ret_from_fork_asm+0x1b/0x30
</TASK>
Allocated by task 808602:
kasan_save_stack+0x1e/0x40
kasan_set_track+0x21/0x30
__kasan_slab_alloc+0x83/0x90
kmem_cache_alloc_node+0x1b1/0x6d0
bfq_get_queue+0x138/0xfa0
bfq_get_bfqq_handle_split+0xe3/0x2c0
bfq_init_rq+0x196/0xbb0
bfq_insert_request.isra.0+0xb5/0x480
bfq_insert_requests+0x156/0x180
blk_mq_insert_request+0x15d/0x440
blk_mq_submit_bio+0x8a4/0xb00
submit_bio_noacct_nocheck+0x331/0x400
__blkdev_direct_IO_async+0x2dd/0x330
blkdev_write_iter+0x39a/0x450
io_write+0x22a/0x840
io_issue_sqe+0x87/0x300
io_wq_submit_work+0xeb/0x390
io_worker_handle_work+0x24d/0x550
io_wq_worker+0x27f/0x6c0
ret_from_fork+0x2d/0x50
ret_from_fork_asm+0x1b/0x30
Freed by task 808589:
kasan_save_stack+0x1e/0x40
kasan_set_track+0x21/0x30
kasan_save_free_info+0x27/0x40
__kasan_slab_free+0x126/0x1b0
kmem_cache_free+0x10c/0x750
bfq_put_queue+0x2dd/0x770
__bfq_insert_request.isra.0+0x155/0x7a0
bfq_insert_request.isra.0+0x122/0x480
bfq_insert_requests+0x156/0x180
blk_mq_dispatch_plug_list+0x528/0x7e0
blk_mq_flush_plug_list.part.0+0xe5/0x590
__blk_flush_plug+0x3b/0x90
blk_finish_plug+0x40/0x60
do_writepages+0x19d/0x310
filemap_fdatawrite_wbc+0x95/0xc0
__filemap_fdatawrite_range+0x99/0xd0
filemap_write_and_wait_range.part.0+0x4d/0xa0
blkdev_read_iter+0xef/0x1e0
io_read+0x1b6/0x8a0
io_issue_sqe+0x87/0x300
io_wq_submit_work+0xeb/0x390
io_worker_handle_work+0x24d/0x550
io_wq_worker+0x27f/0x6c0
ret_from_fork+0x2d/0x50
ret_from_fork_asm+0x1b/0x30
Fix the problem by protecting bic_to_bfqq() with bfqd->lock. |
| In the Linux kernel, the following vulnerability has been resolved:
i3c: master: cdns: Fix use after free vulnerability in cdns_i3c_master Driver Due to Race Condition
In the cdns_i3c_master_probe function, &master->hj_work is bound with
cdns_i3c_master_hj. And cdns_i3c_master_interrupt can call
cnds_i3c_master_demux_ibis function to start the work.
If we remove the module which will call cdns_i3c_master_remove to
make cleanup, it will free master->base through i3c_master_unregister
while the work mentioned above will be used. The sequence of operations
that may lead to a UAF bug is as follows:
CPU0 CPU1
| cdns_i3c_master_hj
cdns_i3c_master_remove |
i3c_master_unregister(&master->base) |
device_unregister(&master->dev) |
device_release |
//free master->base |
| i3c_master_do_daa(&master->base)
| //use master->base
Fix it by ensuring that the work is canceled before proceeding with
the cleanup in cdns_i3c_master_remove. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: fix use-after-free bug
The bug can be triggered by sending a single amdgpu_gem_userptr_ioctl
to the AMDGPU DRM driver on any ASICs with an invalid address and size.
The bug was reported by Joonkyo Jung <joonkyoj@yonsei.ac.kr>.
For example the following code:
static void Syzkaller1(int fd)
{
struct drm_amdgpu_gem_userptr arg;
int ret;
arg.addr = 0xffffffffffff0000;
arg.size = 0x80000000; /*2 Gb*/
arg.flags = 0x7;
ret = drmIoctl(fd, 0xc1186451/*amdgpu_gem_userptr_ioctl*/, &arg);
}
Due to the address and size are not valid there is a failure in
amdgpu_hmm_register->mmu_interval_notifier_insert->__mmu_interval_notifier_insert->
check_shl_overflow, but we even the amdgpu_hmm_register failure we still call
amdgpu_hmm_unregister into amdgpu_gem_object_free which causes access to a bad address.
The following stack is below when the issue is reproduced when Kazan is enabled:
[ +0.000014] Hardware name: ASUS System Product Name/ROG STRIX B550-F GAMING (WI-FI), BIOS 1401 12/03/2020
[ +0.000009] RIP: 0010:mmu_interval_notifier_remove+0x327/0x340
[ +0.000017] Code: ff ff 49 89 44 24 08 48 b8 00 01 00 00 00 00 ad de 4c 89 f7 49 89 47 40 48 83 c0 22 49 89 47 48 e8 ce d1 2d 01 e9 32 ff ff ff <0f> 0b e9 16 ff ff ff 4c 89 ef e8 fa 14 b3 ff e9 36 ff ff ff e8 80
[ +0.000014] RSP: 0018:ffffc90002657988 EFLAGS: 00010246
[ +0.000013] RAX: 0000000000000000 RBX: 1ffff920004caf35 RCX: ffffffff8160565b
[ +0.000011] RDX: dffffc0000000000 RSI: 0000000000000004 RDI: ffff8881a9f78260
[ +0.000010] RBP: ffffc90002657a70 R08: 0000000000000001 R09: fffff520004caf25
[ +0.000010] R10: 0000000000000003 R11: ffffffff8161d1d6 R12: ffff88810e988c00
[ +0.000010] R13: ffff888126fb5a00 R14: ffff88810e988c0c R15: ffff8881a9f78260
[ +0.000011] FS: 00007ff9ec848540(0000) GS:ffff8883cc880000(0000) knlGS:0000000000000000
[ +0.000012] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ +0.000010] CR2: 000055b3f7e14328 CR3: 00000001b5770000 CR4: 0000000000350ef0
[ +0.000010] Call Trace:
[ +0.000006] <TASK>
[ +0.000007] ? show_regs+0x6a/0x80
[ +0.000018] ? __warn+0xa5/0x1b0
[ +0.000019] ? mmu_interval_notifier_remove+0x327/0x340
[ +0.000018] ? report_bug+0x24a/0x290
[ +0.000022] ? handle_bug+0x46/0x90
[ +0.000015] ? exc_invalid_op+0x19/0x50
[ +0.000016] ? asm_exc_invalid_op+0x1b/0x20
[ +0.000017] ? kasan_save_stack+0x26/0x50
[ +0.000017] ? mmu_interval_notifier_remove+0x23b/0x340
[ +0.000019] ? mmu_interval_notifier_remove+0x327/0x340
[ +0.000019] ? mmu_interval_notifier_remove+0x23b/0x340
[ +0.000020] ? __pfx_mmu_interval_notifier_remove+0x10/0x10
[ +0.000017] ? kasan_save_alloc_info+0x1e/0x30
[ +0.000018] ? srso_return_thunk+0x5/0x5f
[ +0.000014] ? __kasan_kmalloc+0xb1/0xc0
[ +0.000018] ? srso_return_thunk+0x5/0x5f
[ +0.000013] ? __kasan_check_read+0x11/0x20
[ +0.000020] amdgpu_hmm_unregister+0x34/0x50 [amdgpu]
[ +0.004695] amdgpu_gem_object_free+0x66/0xa0 [amdgpu]
[ +0.004534] ? __pfx_amdgpu_gem_object_free+0x10/0x10 [amdgpu]
[ +0.004291] ? do_syscall_64+0x5f/0xe0
[ +0.000023] ? srso_return_thunk+0x5/0x5f
[ +0.000017] drm_gem_object_free+0x3b/0x50 [drm]
[ +0.000489] amdgpu_gem_userptr_ioctl+0x306/0x500 [amdgpu]
[ +0.004295] ? __pfx_amdgpu_gem_userptr_ioctl+0x10/0x10 [amdgpu]
[ +0.004270] ? srso_return_thunk+0x5/0x5f
[ +0.000014] ? __this_cpu_preempt_check+0x13/0x20
[ +0.000015] ? srso_return_thunk+0x5/0x5f
[ +0.000013] ? sysvec_apic_timer_interrupt+0x57/0xc0
[ +0.000020] ? srso_return_thunk+0x5/0x5f
[ +0.000014] ? asm_sysvec_apic_timer_interrupt+0x1b/0x20
[ +0.000022] ? drm_ioctl_kernel+0x17b/0x1f0 [drm]
[ +0.000496] ? __pfx_amdgpu_gem_userptr_ioctl+0x10/0x10 [amdgpu]
[ +0.004272] ? drm_ioctl_kernel+0x190/0x1f0 [drm]
[ +0.000492] drm_ioctl_kernel+0x140/0x1f0 [drm]
[ +0.000497] ? __pfx_amdgpu_gem_userptr_ioctl+0x10/0x10 [amdgpu]
[ +0.004297] ? __pfx_drm_ioctl_kernel+0x10/0x10 [d
---truncated--- |
| A vulnerability classified as critical has been found in Linux Kernel. Affected is the function btf_dump_name_dups of the file tools/lib/bpf/btf_dump.c of the component libbpf. The manipulation leads to use after free. It is recommended to apply a patch to fix this issue. The identifier of this vulnerability is VDB-211032. |
| XMP Toolkit SDK versions 2020.1 (and earlier) are affected by a use-after-free vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| Wazuh is a free and open source platform used for threat prevention, detection, and response. Prior to 4.11.0, w_copy_event_for_log() references memory (initially allocated in OS_CleanMSG()) after it has been freed. A compromised agent can potentially compromise the integrity of the application by sending a specially crafted message to the wazuh manager. An attacker who is able to craft and send an agent message to the wazuh manager can leverage this issue to potentially compromise the integrity of the application (the use of previously freed memory may corrupt valid data, if the memory area in question has been allocated and used properly elsewhere). This vulnerability is fixed in 4.11.0. |
| A Use After Free vulnerability in svg_dev_text_span_as_paths_defs function in source/fitz/svg-device.c in Artifex Software MuPDF 1.16.0 allows remote attackers to cause a denial of service via opening of a crafted PDF file. |
| The Arm Mali GPU kernel driver allows unprivileged users to access freed memory because GPU memory operations are mishandled. This affects Bifrost r0p0 through r38p1, and r39p0; Valhall r19p0 through r38p1, and r39p0; and Midgard r4p0 through r32p0. |
| . The Arm Mali GPU kernel driver allows an unprivileged user to achieve access to freed memory, leading to information disclosure or root privilege escalation. This affects Bifrost r16p0 through r29p0 before r30p0, Valhall r19p0 through r29p0 before r30p0, and Midgard r28p0 through r30p0. |
| The Arm Mali GPU kernel driver allows privilege escalation or information disclosure because GPU memory operations are mishandled, leading to a use-after-free. This affects Bifrost r0p0 through r28p0 before r29p0, Valhall r19p0 through r28p0 before r29p0, and Midgard r4p0 through r30p0. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: fix read pointer after free in ath12k_mac_assign_vif_to_vdev()
In ath12k_mac_assign_vif_to_vdev(), if arvif is created on a different
radio, it gets deleted from that radio through a call to
ath12k_mac_unassign_link_vif(). This action frees the arvif pointer.
Subsequently, there is a check involving arvif, which will result in a
read-after-free scenario.
Fix this by moving this check after arvif is again assigned via call to
ath12k_mac_assign_link_vif().
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 |
| In the Linux kernel, the following vulnerability has been resolved:
Revert "smb: client: fix TCP timers deadlock after rmmod"
This reverts commit e9f2517a3e18a54a3943c098d2226b245d488801.
Commit e9f2517a3e18 ("smb: client: fix TCP timers deadlock after
rmmod") is intended to fix a null-ptr-deref in LOCKDEP, which is
mentioned as CVE-2024-54680, but is actually did not fix anything;
The issue can be reproduced on top of it. [0]
Also, it reverted the change by commit ef7134c7fc48 ("smb: client:
Fix use-after-free of network namespace.") and introduced a real
issue by reviving the kernel TCP socket.
When a reconnect happens for a CIFS connection, the socket state
transitions to FIN_WAIT_1. Then, inet_csk_clear_xmit_timers_sync()
in tcp_close() stops all timers for the socket.
If an incoming FIN packet is lost, the socket will stay at FIN_WAIT_1
forever, and such sockets could be leaked up to net.ipv4.tcp_max_orphans.
Usually, FIN can be retransmitted by the peer, but if the peer aborts
the connection, the issue comes into reality.
I warned about this privately by pointing out the exact report [1],
but the bogus fix was finally merged.
So, we should not stop the timers to finally kill the connection on
our side in that case, meaning we must not use a kernel socket for
TCP whose sk->sk_net_refcnt is 0.
The kernel socket does not have a reference to its netns to make it
possible to tear down netns without cleaning up every resource in it.
For example, tunnel devices use a UDP socket internally, but we can
destroy netns without removing such devices and let it complete
during exit. Otherwise, netns would be leaked when the last application
died.
However, this is problematic for TCP sockets because TCP has timers to
close the connection gracefully even after the socket is close()d. The
lifetime of the socket and its netns is different from the lifetime of
the underlying connection.
If the socket user does not maintain the netns lifetime, the timer could
be fired after the socket is close()d and its netns is freed up, resulting
in use-after-free.
Actually, we have seen so many similar issues and converted such sockets
to have a reference to netns.
That's why I converted the CIFS client socket to have a reference to
netns (sk->sk_net_refcnt == 1), which is somehow mentioned as out-of-scope
of CIFS and technically wrong in e9f2517a3e18, but **is in-scope and right
fix**.
Regarding the LOCKDEP issue, we can prevent the module unload by
bumping the module refcount when switching the LOCKDDEP key in
sock_lock_init_class_and_name(). [2]
For a while, let's revert the bogus fix.
Note that now we can use sk_net_refcnt_upgrade() for the socket
conversion, but I'll do so later separately to make backport easy. |
| In the Linux kernel, the following vulnerability has been resolved:
fuse: revert back to __readahead_folio() for readahead
In commit 3eab9d7bc2f4 ("fuse: convert readahead to use folios"), the
logic was converted to using the new folio readahead code, which drops
the reference on the folio once it is locked, using an inferred
reference on the folio. Previously we held a reference on the folio for
the entire duration of the readpages call.
This is fine, however for the case for splice pipe responses where we
will remove the old folio and splice in the new folio (see
fuse_try_move_page()), we assume that there is a reference held on the
folio for ap->folios, which is no longer the case.
To fix this, revert back to __readahead_folio() which allows us to hold
the reference on the folio for the duration of readpages until either we
drop the reference ourselves in fuse_readpages_end() or the reference is
dropped after it's replaced in the page cache in the splice case.
This will fix the UAF bug that was reported. |
| VMware ESXi (7.0 before ESXi70U1b-17168206, 6.7 before ESXi670-202011101-SG, 6.5 before ESXi650-202011301-SG), Workstation (15.x before 15.5.7), Fusion (11.x before 11.5.7) contain a use-after-free vulnerability in the XHCI USB controller. A malicious actor with local administrative privileges on a virtual machine may exploit this issue to execute code as the virtual machine's VMX process running on the host. |
| Pulse Connect Secure 9.0R3/9.1R1 and higher is vulnerable to an authentication bypass vulnerability exposed by the Windows File Share Browser and Pulse Secure Collaboration features of Pulse Connect Secure that can allow an unauthenticated user to perform remote arbitrary code execution on the Pulse Connect Secure gateway. This vulnerability has been exploited in the wild. |
| OpenSLP as used in VMware ESXi (7.0 before ESXi_7.0.1-0.0.16850804, 6.7 before ESXi670-202010401-SG, 6.5 before ESXi650-202010401-SG) has a use-after-free issue. A malicious actor residing in the management network who has access to port 427 on an ESXi machine may be able to trigger a use-after-free in the OpenSLP service resulting in remote code execution. |
| Internet Explorer Memory Corruption Vulnerability |
