| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Sanitize payload size to prevent member overflow
In qla27xx_copy_fpin_pkt() and qla27xx_copy_multiple_pkt(), the frame_size
reported by firmware is used to calculate the copy length into
item->iocb. However, the iocb member is defined as a fixed-size 64-byte
array within struct purex_item.
If the reported frame_size exceeds 64 bytes, subsequent memcpy calls will
overflow the iocb member boundary. While extra memory might be allocated,
this cross-member write is unsafe and triggers warnings under
CONFIG_FORTIFY_SOURCE.
Fix this by capping total_bytes to the size of the iocb member (64 bytes)
before allocation and copying. This ensures all copies remain within the
bounds of the destination structure member. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: authencesn - reject too-short AAD (assoclen<8) to match ESP/ESN spec
authencesn assumes an ESP/ESN-formatted AAD. When assoclen is shorter than
the minimum expected length, crypto_authenc_esn_decrypt() can advance past
the end of the destination scatterlist and trigger a NULL pointer dereference
in scatterwalk_map_and_copy(), leading to a kernel panic (DoS).
Add a minimum AAD length check to fail fast on invalid inputs. |
| In the Linux kernel, the following vulnerability has been resolved:
can: kvaser_usb: kvaser_usb_read_bulk_callback(): fix URB memory leak
Fix similar memory leak as in commit 7352e1d5932a ("can: gs_usb:
gs_usb_receive_bulk_callback(): fix URB memory leak").
In kvaser_usb_set_{,data_}bittiming() -> kvaser_usb_setup_rx_urbs(), the
URBs for USB-in transfers are allocated, added to the dev->rx_submitted
anchor and submitted. In the complete callback
kvaser_usb_read_bulk_callback(), the URBs are processed and resubmitted. In
kvaser_usb_remove_interfaces() the URBs are freed by calling
usb_kill_anchored_urbs(&dev->rx_submitted).
However, this does not take into account that the USB framework unanchors
the URB before the complete function is called. This means that once an
in-URB has been completed, it is no longer anchored and is ultimately not
released in usb_kill_anchored_urbs().
Fix the memory leak by anchoring the URB in the
kvaser_usb_read_bulk_callback() to the dev->rx_submitted anchor. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: hp-bioscfg: Fix kernel panic in GET_INSTANCE_ID macro
The GET_INSTANCE_ID macro that caused a kernel panic when accessing sysfs
attributes:
1. Off-by-one error: The loop condition used '<=' instead of '<',
causing access beyond array bounds. Since array indices are 0-based
and go from 0 to instances_count-1, the loop should use '<'.
2. Missing NULL check: The code dereferenced attr_name_kobj->name
without checking if attr_name_kobj was NULL, causing a null pointer
dereference in min_length_show() and other attribute show functions.
The panic occurred when fwupd tried to read BIOS configuration attributes:
Oops: general protection fault [#1] SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
RIP: 0010:min_length_show+0xcf/0x1d0 [hp_bioscfg]
Add a NULL check for attr_name_kobj before dereferencing and corrects
the loop boundary to match the pattern used elsewhere in the driver. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: act_ife: avoid possible NULL deref
tcf_ife_encode() must make sure ife_encode() does not return NULL.
syzbot reported:
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
RIP: 0010:ife_tlv_meta_encode+0x41/0xa0 net/ife/ife.c:166
CPU: 3 UID: 0 PID: 8990 Comm: syz.0.696 Not tainted syzkaller #0 PREEMPT(full)
Call Trace:
<TASK>
ife_encode_meta_u32+0x153/0x180 net/sched/act_ife.c:101
tcf_ife_encode net/sched/act_ife.c:841 [inline]
tcf_ife_act+0x1022/0x1de0 net/sched/act_ife.c:877
tc_act include/net/tc_wrapper.h:130 [inline]
tcf_action_exec+0x1c0/0xa20 net/sched/act_api.c:1152
tcf_exts_exec include/net/pkt_cls.h:349 [inline]
mall_classify+0x1a0/0x2a0 net/sched/cls_matchall.c:42
tc_classify include/net/tc_wrapper.h:197 [inline]
__tcf_classify net/sched/cls_api.c:1764 [inline]
tcf_classify+0x7f2/0x1380 net/sched/cls_api.c:1860
multiq_classify net/sched/sch_multiq.c:39 [inline]
multiq_enqueue+0xe0/0x510 net/sched/sch_multiq.c:66
dev_qdisc_enqueue+0x45/0x250 net/core/dev.c:4147
__dev_xmit_skb net/core/dev.c:4262 [inline]
__dev_queue_xmit+0x2998/0x46c0 net/core/dev.c:4798 |
| In the Linux kernel, the following vulnerability has been resolved:
regmap: Fix race condition in hwspinlock irqsave routine
Previously, the address of the shared member '&map->spinlock_flags' was
passed directly to 'hwspin_lock_timeout_irqsave'. This creates a race
condition where multiple contexts contending for the lock could overwrite
the shared flags variable, potentially corrupting the state for the
current lock owner.
Fix this by using a local stack variable 'flags' to store the IRQ state
temporarily. |
| In the Linux kernel, the following vulnerability has been resolved:
l2tp: Fix memleak in l2tp_udp_encap_recv().
syzbot reported memleak of struct l2tp_session, l2tp_tunnel,
sock, etc. [0]
The cited commit moved down the validation of the protocol
version in l2tp_udp_encap_recv().
The new place requires an extra error handling to avoid the
memleak.
Let's call l2tp_session_put() there.
[0]:
BUG: memory leak
unreferenced object 0xffff88810a290200 (size 512):
comm "syz.0.17", pid 6086, jiffies 4294944299
hex dump (first 32 bytes):
7d eb 04 0c 00 00 00 00 01 00 00 00 00 00 00 00 }...............
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace (crc babb6a4f):
kmemleak_alloc_recursive include/linux/kmemleak.h:44 [inline]
slab_post_alloc_hook mm/slub.c:4958 [inline]
slab_alloc_node mm/slub.c:5263 [inline]
__do_kmalloc_node mm/slub.c:5656 [inline]
__kmalloc_noprof+0x3e0/0x660 mm/slub.c:5669
kmalloc_noprof include/linux/slab.h:961 [inline]
kzalloc_noprof include/linux/slab.h:1094 [inline]
l2tp_session_create+0x3a/0x3b0 net/l2tp/l2tp_core.c:1778
pppol2tp_connect+0x48b/0x920 net/l2tp/l2tp_ppp.c:755
__sys_connect_file+0x7a/0xb0 net/socket.c:2089
__sys_connect+0xde/0x110 net/socket.c:2108
__do_sys_connect net/socket.c:2114 [inline]
__se_sys_connect net/socket.c:2111 [inline]
__x64_sys_connect+0x1c/0x30 net/socket.c:2111
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xa4/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: scarlett2: Fix buffer overflow in config retrieval
The scarlett2_usb_get_config() function has a logic error in the
endianness conversion code that can cause buffer overflows when
count > 1.
The code checks `if (size == 2)` where `size` is the total buffer size in
bytes, then loops `count` times treating each element as u16 (2 bytes).
This causes the loop to access `count * 2` bytes when the buffer only
has `size` bytes allocated.
Fix by checking the element size (config_item->size) instead of the
total buffer size. This ensures the endianness conversion matches the
actual element type. |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: cdev: Fix resource leaks on errors in lineinfo_changed_notify()
On error handling paths, lineinfo_changed_notify() doesn't free the
allocated resources which results leaks. Fix it. |
| In the Linux kernel, the following vulnerability has been resolved:
net: phy: intel-xway: fix OF node refcount leakage
Automated review spotted am OF node reference count leakage when
checking if the 'leds' child node exists.
Call of_put_node() to correctly maintain the refcount. |
| In the Linux kernel, the following vulnerability has been resolved:
fou: Don't allow 0 for FOU_ATTR_IPPROTO.
fou_udp_recv() has the same problem mentioned in the previous
patch.
If FOU_ATTR_IPPROTO is set to 0, skb is not freed by
fou_udp_recv() nor "resubmit"-ted in ip_protocol_deliver_rcu().
Let's forbid 0 for FOU_ATTR_IPPROTO. |
| In the Linux kernel, the following vulnerability has been resolved:
be2net: Fix NULL pointer dereference in be_cmd_get_mac_from_list
When the parameter pmac_id_valid argument of be_cmd_get_mac_from_list() is
set to false, the driver may request the PMAC_ID from the firmware of the
network card, and this function will store that PMAC_ID at the provided
address pmac_id. This is the contract of this function.
However, there is a location within the driver where both
pmac_id_valid == false and pmac_id == NULL are being passed. This could
result in dereferencing a NULL pointer.
To resolve this issue, it is necessary to pass the address of a stub
variable to the function. |
| In the Linux kernel, the following vulnerability has been resolved:
vsock/virtio: cap TX credit to local buffer size
The virtio transports derives its TX credit directly from peer_buf_alloc,
which is set from the remote endpoint's SO_VM_SOCKETS_BUFFER_SIZE value.
On the host side this means that the amount of data we are willing to
queue for a connection is scaled by a guest-chosen buffer size, rather
than the host's own vsock configuration. A malicious guest can advertise
a large buffer and read slowly, causing the host to allocate a
correspondingly large amount of sk_buff memory.
The same thing would happen in the guest with a malicious host, since
virtio transports share the same code base.
Introduce a small helper, virtio_transport_tx_buf_size(), that
returns min(peer_buf_alloc, buf_alloc), and use it wherever we consume
peer_buf_alloc.
This ensures the effective TX window is bounded by both the peer's
advertised buffer and our own buf_alloc (already clamped to
buffer_max_size via SO_VM_SOCKETS_BUFFER_MAX_SIZE), so a remote peer
cannot force the other to queue more data than allowed by its own
vsock settings.
On an unpatched Ubuntu 22.04 host (~64 GiB RAM), running a PoC with
32 guest vsock connections advertising 2 GiB each and reading slowly
drove Slab/SUnreclaim from ~0.5 GiB to ~57 GiB; the system only
recovered after killing the QEMU process. That said, if QEMU memory is
limited with cgroups, the maximum memory used will be limited.
With this patch applied:
Before:
MemFree: ~61.6 GiB
Slab: ~142 MiB
SUnreclaim: ~117 MiB
After 32 high-credit connections:
MemFree: ~61.5 GiB
Slab: ~178 MiB
SUnreclaim: ~152 MiB
Only ~35 MiB increase in Slab/SUnreclaim, no host OOM, and the guest
remains responsive.
Compatibility with non-virtio transports:
- VMCI uses the AF_VSOCK buffer knobs to size its queue pairs per
socket based on the local vsk->buffer_* values; the remote side
cannot enlarge those queues beyond what the local endpoint
configured.
- Hyper-V's vsock transport uses fixed-size VMBus ring buffers and
an MTU bound; there is no peer-controlled credit field comparable
to peer_buf_alloc, and the remote endpoint cannot drive in-flight
kernel memory above those ring sizes.
- The loopback path reuses virtio_transport_common.c, so it
naturally follows the same semantics as the virtio transport.
This change is limited to virtio_transport_common.c and thus affects
virtio-vsock, vhost-vsock, and loopback, bringing them in line with the
"remote window intersected with local policy" behaviour that VMCI and
Hyper-V already effectively have.
[Stefano: small adjustments after changing the previous patch]
[Stefano: tweak the commit message] |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: xen: scsiback: Fix potential memory leak in scsiback_remove()
Memory allocated for struct vscsiblk_info in scsiback_probe() is not
freed in scsiback_remove() leading to potential memory leaks on remove,
as well as in the scsiback_probe() error paths. Fix that by freeing it
in scsiback_remove(). |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Fix crash on synthetic stacktrace field usage
When creating a synthetic event based on an existing synthetic event that
had a stacktrace field and the new synthetic event used that field a
kernel crash occurred:
~# cd /sys/kernel/tracing
~# echo 's:stack unsigned long stack[];' > dynamic_events
~# echo 'hist:keys=prev_pid:s0=common_stacktrace if prev_state & 3' >> events/sched/sched_switch/trigger
~# echo 'hist:keys=next_pid:s1=$s0:onmatch(sched.sched_switch).trace(stack,$s1)' >> events/sched/sched_switch/trigger
The above creates a synthetic event that takes a stacktrace when a task
schedules out in a non-running state and passes that stacktrace to the
sched_switch event when that task schedules back in. It triggers the
"stack" synthetic event that has a stacktrace as its field (called "stack").
~# echo 's:syscall_stack s64 id; unsigned long stack[];' >> dynamic_events
~# echo 'hist:keys=common_pid:s2=stack' >> events/synthetic/stack/trigger
~# echo 'hist:keys=common_pid:s3=$s2,i0=id:onmatch(synthetic.stack).trace(syscall_stack,$i0,$s3)' >> events/raw_syscalls/sys_exit/trigger
The above makes another synthetic event called "syscall_stack" that
attaches the first synthetic event (stack) to the sys_exit trace event and
records the stacktrace from the stack event with the id of the system call
that is exiting.
When enabling this event (or using it in a historgram):
~# echo 1 > events/synthetic/syscall_stack/enable
Produces a kernel crash!
BUG: unable to handle page fault for address: 0000000000400010
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: Oops: 0000 [#1] SMP PTI
CPU: 6 UID: 0 PID: 1257 Comm: bash Not tainted 6.16.3+deb14-amd64 #1 PREEMPT(lazy) Debian 6.16.3-1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.17.0-debian-1.17.0-1 04/01/2014
RIP: 0010:trace_event_raw_event_synth+0x90/0x380
Code: c5 00 00 00 00 85 d2 0f 84 e1 00 00 00 31 db eb 34 0f 1f 00 66 66 2e 0f 1f 84 00 00 00 00 00 66 66 2e 0f 1f 84 00 00 00 00 00 <49> 8b 04 24 48 83 c3 01 8d 0c c5 08 00 00 00 01 cd 41 3b 5d 40 0f
RSP: 0018:ffffd2670388f958 EFLAGS: 00010202
RAX: ffff8ba1065cc100 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000000001 RSI: fffff266ffda7b90 RDI: ffffd2670388f9b0
RBP: 0000000000000010 R08: ffff8ba104e76000 R09: ffffd2670388fa50
R10: ffff8ba102dd42e0 R11: ffffffff9a908970 R12: 0000000000400010
R13: ffff8ba10a246400 R14: ffff8ba10a710220 R15: fffff266ffda7b90
FS: 00007fa3bc63f740(0000) GS:ffff8ba2e0f48000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000400010 CR3: 0000000107f9e003 CR4: 0000000000172ef0
Call Trace:
<TASK>
? __tracing_map_insert+0x208/0x3a0
action_trace+0x67/0x70
event_hist_trigger+0x633/0x6d0
event_triggers_call+0x82/0x130
trace_event_buffer_commit+0x19d/0x250
trace_event_raw_event_sys_exit+0x62/0xb0
syscall_exit_work+0x9d/0x140
do_syscall_64+0x20a/0x2f0
? trace_event_raw_event_sched_switch+0x12b/0x170
? save_fpregs_to_fpstate+0x3e/0x90
? _raw_spin_unlock+0xe/0x30
? finish_task_switch.isra.0+0x97/0x2c0
? __rseq_handle_notify_resume+0xad/0x4c0
? __schedule+0x4b8/0xd00
? restore_fpregs_from_fpstate+0x3c/0x90
? switch_fpu_return+0x5b/0xe0
? do_syscall_64+0x1ef/0x2f0
? do_fault+0x2e9/0x540
? __handle_mm_fault+0x7d1/0xf70
? count_memcg_events+0x167/0x1d0
? handle_mm_fault+0x1d7/0x2e0
? do_user_addr_fault+0x2c3/0x7f0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
The reason is that the stacktrace field is not labeled as such, and is
treated as a normal field and not as a dynamic event that it is.
In trace_event_raw_event_synth() the event is field is still treated as a
dynamic array, but the retrieval of the data is considered a normal field,
and the reference is just the meta data:
// Meta data is retrieved instead of a dynamic array
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
iio: dac: ad3552r-hs: fix out-of-bound write in ad3552r_hs_write_data_source
When simple_write_to_buffer() succeeds, it returns the number of bytes
actually copied to the buffer. The code incorrectly uses 'count'
as the index for null termination instead of the actual bytes copied.
If count exceeds the buffer size, this leads to out-of-bounds write.
Add a check for the count and use the return value as the index.
The bug was validated using a demo module that mirrors the original
code and was tested under QEMU.
Pattern of the bug:
- A fixed 64-byte stack buffer is filled using count.
- If count > 64, the code still does buf[count] = '\0', causing an
- out-of-bounds write on the stack.
Steps for reproduce:
- Opens the device node.
- Writes 128 bytes of A to it.
- This overflows the 64-byte stack buffer and KASAN reports the OOB.
Found via static analysis. This is similar to the
commit da9374819eb3 ("iio: backend: fix out-of-bound write") |
| In the Linux kernel, the following vulnerability has been resolved:
uacce: fix cdev handling in the cleanup path
When cdev_device_add fails, it internally releases the cdev memory,
and if cdev_device_del is then executed, it will cause a hang error.
To fix it, we check the return value of cdev_device_add() and clear
uacce->cdev to avoid calling cdev_device_del in the uacce_remove. |
| In the Linux kernel, the following vulnerability has been resolved:
migrate: correct lock ordering for hugetlb file folios
Syzbot has found a deadlock (analyzed by Lance Yang):
1) Task (5749): Holds folio_lock, then tries to acquire i_mmap_rwsem(read lock).
2) Task (5754): Holds i_mmap_rwsem(write lock), then tries to acquire
folio_lock.
migrate_pages()
-> migrate_hugetlbs()
-> unmap_and_move_huge_page() <- Takes folio_lock!
-> remove_migration_ptes()
-> __rmap_walk_file()
-> i_mmap_lock_read() <- Waits for i_mmap_rwsem(read lock)!
hugetlbfs_fallocate()
-> hugetlbfs_punch_hole() <- Takes i_mmap_rwsem(write lock)!
-> hugetlbfs_zero_partial_page()
-> filemap_lock_hugetlb_folio()
-> filemap_lock_folio()
-> __filemap_get_folio <- Waits for folio_lock!
The migration path is the one taking locks in the wrong order according to
the documentation at the top of mm/rmap.c. So expand the scope of the
existing i_mmap_lock to cover the calls to remove_migration_ptes() too.
This is (mostly) how it used to be after commit c0d0381ade79. That was
removed by 336bf30eb765 for both file & anon hugetlb pages when it should
only have been removed for anon hugetlb pages. |
| In the Linux kernel, the following vulnerability has been resolved:
bonding: limit BOND_MODE_8023AD to Ethernet devices
BOND_MODE_8023AD makes sense for ARPHRD_ETHER only.
syzbot reported:
BUG: KASAN: global-out-of-bounds in __hw_addr_create net/core/dev_addr_lists.c:63 [inline]
BUG: KASAN: global-out-of-bounds in __hw_addr_add_ex+0x25d/0x760 net/core/dev_addr_lists.c:118
Read of size 16 at addr ffffffff8bf94040 by task syz.1.3580/19497
CPU: 1 UID: 0 PID: 19497 Comm: syz.1.3580 Tainted: G L syzkaller #0 PREEMPT(full)
Tainted: [L]=SOFTLOCKUP
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/25/2025
Call Trace:
<TASK>
dump_stack_lvl+0xe8/0x150 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0xca/0x240 mm/kasan/report.c:482
kasan_report+0x118/0x150 mm/kasan/report.c:595
check_region_inline mm/kasan/generic.c:-1 [inline]
kasan_check_range+0x2b0/0x2c0 mm/kasan/generic.c:200
__asan_memcpy+0x29/0x70 mm/kasan/shadow.c:105
__hw_addr_create net/core/dev_addr_lists.c:63 [inline]
__hw_addr_add_ex+0x25d/0x760 net/core/dev_addr_lists.c:118
__dev_mc_add net/core/dev_addr_lists.c:868 [inline]
dev_mc_add+0xa1/0x120 net/core/dev_addr_lists.c:886
bond_enslave+0x2b8b/0x3ac0 drivers/net/bonding/bond_main.c:2180
do_set_master+0x533/0x6d0 net/core/rtnetlink.c:2963
do_setlink+0xcf0/0x41c0 net/core/rtnetlink.c:3165
rtnl_changelink net/core/rtnetlink.c:3776 [inline]
__rtnl_newlink net/core/rtnetlink.c:3935 [inline]
rtnl_newlink+0x161c/0x1c90 net/core/rtnetlink.c:4072
rtnetlink_rcv_msg+0x7cf/0xb70 net/core/rtnetlink.c:6958
netlink_rcv_skb+0x208/0x470 net/netlink/af_netlink.c:2550
netlink_unicast_kernel net/netlink/af_netlink.c:1318 [inline]
netlink_unicast+0x82f/0x9e0 net/netlink/af_netlink.c:1344
netlink_sendmsg+0x805/0xb30 net/netlink/af_netlink.c:1894
sock_sendmsg_nosec net/socket.c:727 [inline]
__sock_sendmsg+0x21c/0x270 net/socket.c:742
____sys_sendmsg+0x505/0x820 net/socket.c:2592
___sys_sendmsg+0x21f/0x2a0 net/socket.c:2646
__sys_sendmsg+0x164/0x220 net/socket.c:2678
do_syscall_32_irqs_on arch/x86/entry/syscall_32.c:83 [inline]
__do_fast_syscall_32+0x1dc/0x560 arch/x86/entry/syscall_32.c:307
do_fast_syscall_32+0x34/0x80 arch/x86/entry/syscall_32.c:332
entry_SYSENTER_compat_after_hwframe+0x84/0x8e
</TASK>
The buggy address belongs to the variable:
lacpdu_mcast_addr+0x0/0x40 |
| In the Linux kernel, the following vulnerability has been resolved:
ice: fix devlink reload call trace
Commit 4da71a77fc3b ("ice: read internal temperature sensor") introduced
internal temperature sensor reading via HWMON. ice_hwmon_init() was added
to ice_init_feature() and ice_hwmon_exit() was added to ice_remove(). As a
result if devlink reload is used to reinit the device and then the driver
is removed, a call trace can occur.
BUG: unable to handle page fault for address: ffffffffc0fd4b5d
Call Trace:
string+0x48/0xe0
vsnprintf+0x1f9/0x650
sprintf+0x62/0x80
name_show+0x1f/0x30
dev_attr_show+0x19/0x60
The call trace repeats approximately every 10 minutes when system
monitoring tools (e.g., sadc) attempt to read the orphaned hwmon sysfs
attributes that reference freed module memory.
The sequence is:
1. Driver load, ice_hwmon_init() gets called from ice_init_feature()
2. Devlink reload down, flow does not call ice_remove()
3. Devlink reload up, ice_hwmon_init() gets called from
ice_init_feature() resulting in a second instance
4. Driver unload, ice_hwmon_exit() called from ice_remove() leaving the
first hwmon instance orphaned with dangling pointer
Fix this by moving ice_hwmon_exit() from ice_remove() to
ice_deinit_features() to ensure proper cleanup symmetry with
ice_hwmon_init(). |
