| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability in the HTTP remote procedure call (RPC) service of set-top box (STB) receivers manufactured by Cisco for Yes could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability exists because the firmware of an affected device fails to handle certain XML values that are passed to the HTTP RPC service listening on the local subnet of the device. An attacker could exploit this vulnerability by submitting a malformed request to an affected device. A successful attack could cause the affected device to restart, resulting in a DoS condition. Yes has updated the affected devices with firmware that addresses this vulnerability. Customers are not required to take action. Vulnerable Products: This vulnerability affects YesMaxTotal, YesMax HD, and YesQuattro STB devices. Cisco Bug IDs: CSCvd08812. |
| Cybozu Garoon before 4.2.1 allows remote attackers to cause a denial of service. |
| A vulnerability in the implementation of the direct authentication feature in Cisco Adaptive Security Appliance (ASA) Software could allow an unauthenticated, remote attacker to cause an affected device to unexpectedly reload, resulting in a denial of service (DoS) condition. The vulnerability is due to incomplete input validation of the HTTP header. An attacker could exploit this vulnerability by sending a crafted HTTP request to the local IP address of an affected device. A successful exploit could allow the attacker to cause the affected device to reload. This vulnerability affects Cisco Adaptive Security Appliance (ASA) Software that is running on the following Cisco products: ASA 5500 Series Adaptive Security Appliances, ASA 5500-X Series Next-Generation Firewalls, ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, ASA 1000V Cloud Firewall, Adaptive Security Virtual Appliance (ASAv), Firepower 4110 Security Appliance, Firepower 9300 ASA Security Module, ISA 3000 Industrial Security Appliance. Cisco Bug IDs: CSCvd59063. |
| A vulnerability in Cisco Meeting Server versions prior to 2.2.2 could allow an authenticated, remote attacker to cause the system to reload, resulting in a denial of service (DoS) condition. The vulnerability is due to video calls being made on systems with a particular configuration. An attacker could exploit this by knowing a valid URI that directs to a Cisco Meeting Server. An attacker could then make a video call and cause the system to reload. Cisco Bug IDs: CSCve65931. |
| By flooding a Juniper Networks router running Junos OS with specially crafted IPv6 traffic, all available resources can be consumed, leading to the inability to store next hop information for legitimate traffic. In extreme cases, the crafted IPv6 traffic may result in a total resource exhaustion and kernel panic. The issue is triggered by traffic destined to the router. Transit traffic does not trigger the vulnerability. This issue only affects devices with IPv6 enabled and configured. Devices not configured to process IPv6 traffic are unaffected by this vulnerability. This issue was found during internal product security testing. Juniper SIRT is not aware of any malicious exploitation of this vulnerability. Affected releases are Juniper Networks Junos OS 11.4 prior to 11.4R13-S3; 12.3 prior to 12.3R3-S4; 12.3X48 prior to 12.3X48-D30; 13.3 prior to 13.3R10, 13.3R4-S11; 14.1 prior to 14.1R2-S8, 14.1R4-S12, 14.1R8; 14.1X53 prior to 14.1X53-D28, 14.1X53-D40; 14.1X55 prior to 14.1X55-D35; 14.2 prior to 14.2R3-S10, 14.2R4-S7, 14.2R6; 15.1 prior to 15.1F2-S5, 15.1F5-S2, 15.1F6, 15.1R3; 15.1X49 prior to 15.1X49-D40; 15.1X53 prior to 15.1X53-D57, 15.1X53-D70. |
| A vulnerability in the detection engine parsing of Pragmatic General Multicast (PGM) protocol packets for Cisco Firepower System Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition due to the Snort process unexpectedly restarting. The vulnerability is due to improper input validation of the fields in the PGM protocol packet. An attacker could exploit this vulnerability by sending a crafted PGM packet to the detection engine on the targeted device. An exploit could allow the attacker to cause a DoS condition if the Snort process restarts and traffic inspection is bypassed or traffic is dropped. This vulnerability affects Cisco Firepower System Software that has one or more file action policies configured and is running on any of the following Cisco products: Adaptive Security Appliance (ASA) 5500-X Series with FirePOWER Services; Adaptive Security Appliance (ASA) 5500-X Series Next-Generation Firewalls; Advanced Malware Protection (AMP) for Networks, 7000 Series Appliances; Advanced Malware Protection (AMP) for Networks, 8000 Series Appliances; Firepower 4100 Series Security Appliances; FirePOWER 7000 Series Appliances; FirePOWER 8000 Series Appliances; Firepower 9300 Series Security Appliances; FirePOWER Threat Defense for Integrated Services Routers (ISRs); Industrial Security Appliance 3000; Sourcefire 3D System Appliances; Virtual Next-Generation Intrusion Prevention System (NGIPSv) for VMware. Fixed versions: 5.4.0.10 5.4.1.9 6.0.1.3 6.1.0 6.2.0. Cisco Bug IDs: CSCuz00876. |
| The sanity_check_ckpt function in fs/f2fs/super.c in the Linux kernel before 4.12.4 does not validate the blkoff and segno arrays, which allows local users to gain privileges via unspecified vectors. |
| Memory leak in SOGo 2.3.7 allows remote attackers to cause a denial of service (memory consumption) via a large number of attempts to upload a large attachment, related to temporary files. |
| A vulnerability in the Akamai Connect feature of Cisco Wide Area Application Services (WAAS) Appliances could allow an unauthenticated, remote attacker to cause a denial-of-service (DoS) condition on an affected device. The vulnerability is due to certain file-handling inefficiencies of the affected system. An attacker could exploit this vulnerability by directing client systems to access a corrupted file that the client systems cannot decompress correctly. A successful exploit could allow the attacker to cause the affected device to crash or hang unexpectedly and result in a DoS condition that may require manual intervention to regain normal operating conditions. Cisco Bug IDs: CSCve82472. |
| A HTTP/2 implementation built using any version of the Python HPACK library between v1.0.0 and v2.2.0 could be targeted for a denial of service attack, specifically a so-called "HPACK Bomb" attack. This attack occurs when an attacker inserts a header field that is exactly the size of the HPACK dynamic header table into the dynamic header table. The attacker can then send a header block that is simply repeated requests to expand that field in the dynamic table. This can lead to a gigantic compression ratio of 4,096 or better, meaning that 16kB of data can decompress to 64MB of data on the target machine. |
| Memory leak in the __res_vinit function in the IPv6 name server management code in libresolv in GNU C Library (aka glibc or libc6) before 2.24 allows remote attackers to cause a denial of service (memory consumption) by leveraging partial initialization of internal resolver data structures. |
| A vulnerability in the DNS code of Cisco ASA Software could allow an unauthenticated, remote attacker to cause an affected device to reload or corrupt the information present in the device's local DNS cache. The vulnerability is due to a flaw in handling crafted DNS response messages. An attacker could exploit this vulnerability by triggering a DNS request from the Cisco ASA Software and replying with a crafted response. A successful exploit could cause the device to reload, resulting in a denial of service (DoS) condition or corruption of the local DNS cache information. Note: Only traffic directed to the affected device can be used to exploit this vulnerability. This vulnerability affects Cisco ASA Software configured in routed or transparent firewall mode and single or multiple context mode. This vulnerability can be triggered by IPv4 and IPv6 traffic. This vulnerability affects Cisco ASA Software running on the following products: Cisco ASA 1000V Cloud Firewall, Cisco ASA 5500 Series Adaptive Security Appliances, Cisco ASA 5500-X Series Next-Generation Firewalls, Cisco ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, Cisco Adaptive Security Virtual Appliance (ASAv), Cisco Firepower 9300 ASA Security Module, Cisco ISA 3000 Industrial Security Appliance. Fixed versions: 9.1(7.12) 9.2(4.18) 9.4(3.12) 9.5(3.2) 9.6(2.2). Cisco Bug IDs: CSCvb40898. |
| A vulnerability in the Internet Key Exchange Version 1 (IKEv1) XAUTH code of Cisco ASA Software could allow an authenticated, remote attacker to cause a reload of an affected system. The vulnerability is due to insufficient validation of the IKEv1 XAUTH parameters passed during an IKEv1 negotiation. An attacker could exploit this vulnerability by sending crafted parameters. Note: Only traffic directed to the affected system can be used to exploit this vulnerability. This vulnerability only affects systems configured in routed firewall mode and in single or multiple context mode. This vulnerability can be triggered by IPv4 or IPv6 traffic. A valid IKEv1 Phase 1 needs to be established to exploit this vulnerability, which means that an attacker would need to have knowledge of a pre-shared key or have a valid certificate for phase 1 authentication. This vulnerability affects Cisco ASA Software running on the following products: Cisco ASA 1000V Cloud Firewall, Cisco ASA 5500 Series Adaptive Security Appliances, Cisco ASA 5500-X Series Next-Generation Firewalls, Cisco ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, Cisco Adaptive Security Virtual Appliance (ASAv), Cisco ASA for Firepower 9300 Series, Cisco ISA 3000 Industrial Security Appliance. Fixed versions: 9.1(7.7) 9.2(4.11) 9.4(4) 9.5(3) 9.6(1.5). Cisco Bug IDs: CSCuz11685. |
| A vulnerability in the Simple Network Management Protocol (SNMP) subsystem of Cisco IOS XE 3.16 could allow an authenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to a race condition that could occur when the affected software processes an SNMP read request that contains certain criteria for a specific object ID (OID) and an active crypto session is disconnected on an affected device. An attacker who can authenticate to an affected device could trigger this vulnerability by issuing an SNMP request for a specific OID on the device. A successful exploit will cause the device to restart due to an attempt to access an invalid memory region. The attacker does not control how or when crypto sessions are disconnected on the device. Cisco Bug IDs: CSCvb94392. |
| libalpm, as used in pacman 5.0.1, allows remote attackers to cause a denial of service (infinite loop or out-of-bounds read) via a crafted signature file. |
| A vulnerability in the TCP connection handling functionality of Cisco Remote Expert Manager Software 11.0.0 could allow an unauthenticated, remote attacker to disable TCP ports and cause a denial of service (DoS) condition on an affected system. The vulnerability is due to a lack of rate-limiting functionality in the TCP Listen application of the affected software. An attacker could exploit this vulnerability by sending a crafted TCP traffic stream in which specific types of TCP packets are flooded to an affected device, for example a TCP packet stream in which the TCP FIN bit is set in all the TCP packets. A successful exploit could allow the attacker to cause certain TCP listening ports on the affected system to stop accepting incoming connections for a period of time or until the affected device is restarted, resulting in a DoS condition. In addition, system resources, such as CPU and memory, could be exhausted during the attack. Cisco Bug IDs: CSCva29806. |
| The setup_imginfo_jpg function in lepton/jpgcoder.cc in Dropbox lepton 1.0 allows remote attackers to cause a denial of service (segmentation fault) via a crafted jpeg file. |
| A vulnerability in the Layer 2 Tunneling Protocol (L2TP) parsing function of Cisco IOS (12.0 through 12.4 and 15.0 through 15.6) and Cisco IOS XE (3.1 through 3.18) could allow an unauthenticated, remote attacker to cause an affected device to reload. The vulnerability is due to insufficient validation of L2TP packets. An attacker could exploit this vulnerability by sending a crafted L2TP packet to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a denial of service (DoS) condition. This vulnerability affects Cisco devices that are running a vulnerable release of Cisco IOS or Cisco IOS XE Software if the L2TP feature is enabled for the device and the device is configured as an L2TP Version 2 (L2TPv2) or L2TP Version 3 (L2TPv3) endpoint. By default, the L2TP feature is not enabled. Cisco Bug IDs: CSCuy82078. |
| The Debian initrd script for the cryptsetup package 2:1.7.3-2 and earlier allows physically proximate attackers to gain shell access via many log in attempts with an invalid password. |
| coders/dds.c in ImageMagick before 6.9.0-4 Beta allows remote attackers to cause a denial of service (CPU consumption) via a crafted DDS file. |
