| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Incorrect privilege assignment in Bluetooth in Maintenance mode prior to SMR Apr-2026 Release 1 allows physical attackers to bypass Extend Unlock. |
| UAF vulnerability in the kernel module.
Impact: Successful exploitation of this vulnerability will affect availability and confidentiality. |
| UAF vulnerability in the kernel module.
Impact: Successful exploitation of this vulnerability will affect availability and confidentiality. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: avoid overflows in ip6_datagram_send_ctl()
Yiming Qian reported :
<quote>
I believe I found a locally triggerable kernel bug in the IPv6 sendmsg
ancillary-data path that can panic the kernel via `skb_under_panic()`
(local DoS).
The core issue is a mismatch between:
- a 16-bit length accumulator (`struct ipv6_txoptions::opt_flen`, type
`__u16`) and
- a pointer to the *last* provided destination-options header (`opt->dst1opt`)
when multiple `IPV6_DSTOPTS` control messages (cmsgs) are provided.
- `include/net/ipv6.h`:
- `struct ipv6_txoptions::opt_flen` is `__u16` (wrap possible).
(lines 291-307, especially 298)
- `net/ipv6/datagram.c:ip6_datagram_send_ctl()`:
- Accepts repeated `IPV6_DSTOPTS` and accumulates into `opt_flen`
without rejecting duplicates. (lines 909-933)
- `net/ipv6/ip6_output.c:__ip6_append_data()`:
- Uses `opt->opt_flen + opt->opt_nflen` to compute header
sizes/headroom decisions. (lines 1448-1466, especially 1463-1465)
- `net/ipv6/ip6_output.c:__ip6_make_skb()`:
- Calls `ipv6_push_frag_opts()` if `opt->opt_flen` is non-zero.
(lines 1930-1934)
- `net/ipv6/exthdrs.c:ipv6_push_frag_opts()` / `ipv6_push_exthdr()`:
- Push size comes from `ipv6_optlen(opt->dst1opt)` (based on the
pointed-to header). (lines 1179-1185 and 1206-1211)
1. `opt_flen` is a 16-bit accumulator:
- `include/net/ipv6.h:298` defines `__u16 opt_flen; /* after fragment hdr */`.
2. `ip6_datagram_send_ctl()` accepts *repeated* `IPV6_DSTOPTS` cmsgs
and increments `opt_flen` each time:
- In `net/ipv6/datagram.c:909-933`, for `IPV6_DSTOPTS`:
- It computes `len = ((hdr->hdrlen + 1) << 3);`
- It checks `CAP_NET_RAW` using `ns_capable(net->user_ns,
CAP_NET_RAW)`. (line 922)
- Then it does:
- `opt->opt_flen += len;` (line 927)
- `opt->dst1opt = hdr;` (line 928)
There is no duplicate rejection here (unlike the legacy
`IPV6_2292DSTOPTS` path which rejects duplicates at
`net/ipv6/datagram.c:901-904`).
If enough large `IPV6_DSTOPTS` cmsgs are provided, `opt_flen` wraps
while `dst1opt` still points to a large (2048-byte)
destination-options header.
In the attached PoC (`poc.c`):
- 32 cmsgs with `hdrlen=255` => `len = (255+1)*8 = 2048`
- 1 cmsg with `hdrlen=0` => `len = 8`
- Total increment: `32*2048 + 8 = 65544`, so `(__u16)opt_flen == 8`
- The last cmsg is 2048 bytes, so `dst1opt` points to a 2048-byte header.
3. The transmit path sizes headers using the wrapped `opt_flen`:
- In `net/ipv6/ip6_output.c:1463-1465`:
- `headersize = sizeof(struct ipv6hdr) + (opt ? opt->opt_flen +
opt->opt_nflen : 0) + ...;`
With wrapped `opt_flen`, `headersize`/headroom decisions underestimate
what will be pushed later.
4. When building the final skb, the actual push length comes from
`dst1opt` and is not limited by wrapped `opt_flen`:
- In `net/ipv6/ip6_output.c:1930-1934`:
- `if (opt->opt_flen) proto = ipv6_push_frag_opts(skb, opt, proto);`
- In `net/ipv6/exthdrs.c:1206-1211`, `ipv6_push_frag_opts()` pushes
`dst1opt` via `ipv6_push_exthdr()`.
- In `net/ipv6/exthdrs.c:1179-1184`, `ipv6_push_exthdr()` does:
- `skb_push(skb, ipv6_optlen(opt));`
- `memcpy(h, opt, ipv6_optlen(opt));`
With insufficient headroom, `skb_push()` underflows and triggers
`skb_under_panic()` -> `BUG()`:
- `net/core/skbuff.c:2669-2675` (`skb_push()` calls `skb_under_panic()`)
- `net/core/skbuff.c:207-214` (`skb_panic()` ends in `BUG()`)
- The `IPV6_DSTOPTS` cmsg path requires `CAP_NET_RAW` in the target
netns user namespace (`ns_capable(net->user_ns, CAP_NET_RAW)`).
- Root (or any task with `CAP_NET_RAW`) can trigger this without user
namespaces.
- An unprivileged `uid=1000` user can trigger this if unprivileged
user namespaces are enabled and it can create a userns+netns to obtain
namespaced `CAP_NET_RAW` (the attached PoC does this).
- Local denial of service: kernel BUG/panic (system crash).
-
---truncated--- |
| OpenClaw Client PKCE Verifier Information Disclosure Vulnerability. This vulnerability allows remote attackers to disclose stored credentials on affected installations of OpenClaw. User interaction is required to exploit this vulnerability in that the target must initiate an OAuth authorization flow.
The specific flaw exists within the implementation of OAuth authorization. The issue results from the exposure of sensitive data in the authorization URL query string. An attacker can leverage this vulnerability to disclose stored credentials, leading to further compromise. Was ZDI-CAN-29381. |
| Boundary-unlimited vulnerability in the application read module.
Impact: Successful exploitation of this vulnerability may affect availability. |
| Out-of-bounds write vulnerability in the WEB module.Impact: Successful exploitation of this vulnerability will affect availability and confidentiality. |
| Out-of-bounds write vulnerability in the WEB module.Impact: Successful exploitation of this vulnerability will affect availability and confidentiality. |
| In libexif through 0.6.25, an unsigned 32bit integer overflow in Nikon MakerNote handling could be used by local attackers to cause crashes or information leaks. This only affects 32bit systems. |
| Varnish Enterprise before 6.0.16r12 allows a "workspace overflow" denial of service (daemon panic) for shared VCL. The headerplus.write_req0() function from vmod_headerplus updates the underlying req0, which is normally the original read-only request from which req is derived (readable and writable from VCL). This is useful in the active VCL, after amending req, to prepare a refined req0 before switching to a different VCL with the return (vcl(<label>)) action. This is for example how the Varnish Controller operates shared VCL deployments. If the amended req contained too many header fields for req0, this would have resulted in a workspace overflow that would in turn trigger a panic and crash the Varnish Enterprise server. This could be used as a Denial of Service attack vector by malicious clients. |
| The ZTE ZXEDM iEMS product has a password reset vulnerability for any user.Because the management of the cloud EMS portal does not properly control access to the user list acquisition function, attackers can read all user list information through the user list interface. Attackers can reset the passwords of obtained user information, causing risks such as unauthorized operations. |
| ChargePoint Home Flex OCPP getpreq Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of ChargePoint Home Flex EV chargers. Authentication is not required to exploit this vulnerability.
The specific flaw exists within the handling of OCPP messages. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-26339. |
| KeePassXC OpenSSL Configuration Uncontrolled Search Path Element Local Privilege Escalation Vulnerability. This vulnerability allows local attackers to escalate privileges on affected installations of KeePassXC. An attacker must first obtain the ability to execute low-privileged code on the target system in order to exploit this vulnerability.
The specific flaw exists within the configuration of OpenSSL. The product loads configuration from an unsecured location. An attacker can leverage this vulnerability to escalate privileges and execute arbitrary code in the context of KeePassXC when run by a target user on the system. Was ZDI-CAN-29156. |
| In libexif through 0.6.25, an integer underflow in size checking for Fuji and Olympus MakerNote decoding could be used by attackers to crash or leak information out of libexif-using programs. |
| A vulnerability was found in AstrBotDevs AstrBot up to 4.22.1. This issue affects the function install_plugin_upload of the file astrbot/dashboard/routes/plugin.py of the component install-upload Endpoint. The manipulation of the argument File results in sandbox issue. The attack can be executed remotely. The exploit has been made public and could be used. The project was informed of the problem early through an issue report but has not responded yet. |
| Out-of-bounds write vulnerability in Samsung Open Source Escargot allows Overflow Buffers.This issue affects Escargot: 97e8115ab1110bc502b4b5e4a0c689a71520d335. |
| Improper access control in Samsung Camera prior to version 16.5.00.28 allows local attacker to access location data. User interaction is required for triggering this vulnerability. |
| A Code Injection and Missing Authentication vulnerability in Google Agent Development Kit (ADK) versions 1.7.0 (and 2.0.0a1) through 1.28.1 (and 2.0.0a2) on Python (OSS), Cloud Run, and GKE allows an unauthenticated remote attacker to execute arbitrary code on the server hosting the ADK instance.
This vulnerability was patched in versions 1.28.1 and 2.0.0a2.
Customers need to redeploy the upgraded ADK to their production environments. In addition, if they are running ADK Web locally, they also need to upgrade their local instance. |
| aws-mcp-server Command Injection Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of aws-mcp-server. Authentication is not required to exploit this vulnerability.
The specific flaw exists within the handling of the allowed commands list. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of the MCP server. Was ZDI-CAN-27968. |
| The Optimole – Optimize Images in Real Time plugin for WordPress is vulnerable to Reflected Cross-Site Scripting via URL paths in versions up to, and including, 4.2.3 This is due to insufficient output escaping on user-supplied URL paths in the get_current_url() function, which are inserted into JavaScript code via str_replace() without proper JavaScript context escaping in the replace_content() function. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that execute if they can successfully trick a user into performing an action such as clicking on a link. |
