| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
block: zero non-PI portion of auto integrity buffer
The auto-generated integrity buffer for writes needs to be fully
initialized before being passed to the underlying block device,
otherwise the uninitialized memory can be read back by userspace or
anyone with physical access to the storage device. If protection
information is generated, that portion of the integrity buffer is
already initialized. The integrity data is also zeroed if PI generation
is disabled via sysfs or the PI tuple size is 0. However, this misses
the case where PI is generated and the PI tuple size is nonzero, but the
metadata size is larger than the PI tuple. In this case, the remainder
("opaque") of the metadata is left uninitialized.
Generalize the BLK_INTEGRITY_CSUM_NONE check to cover any case when the
metadata is larger than just the PI tuple. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: tlv320adcx140: fix null pointer
The "snd_soc_component" in "adcx140_priv" was only used once but never
set. It was only used for reaching "dev" which is already present in
"adcx140_priv". |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: tegra-adma: Fix use-after-free
A use-after-free bug exists in the Tegra ADMA driver when audio streams
are terminated, particularly during XRUN conditions. The issue occurs
when the DMA buffer is freed by tegra_adma_terminate_all() before the
vchan completion tasklet finishes accessing it.
The race condition follows this sequence:
1. DMA transfer completes, triggering an interrupt that schedules the
completion tasklet (tasklet has not executed yet)
2. Audio playback stops, calling tegra_adma_terminate_all() which
frees the DMA buffer memory via kfree()
3. The scheduled tasklet finally executes, calling vchan_complete()
which attempts to access the already-freed memory
Since tasklets can execute at any time after being scheduled, there is
no guarantee that the buffer will remain valid when vchan_complete()
runs.
Fix this by properly synchronizing the virtual channel completion:
- Calling vchan_terminate_vdesc() in tegra_adma_stop() to mark the
descriptors as terminated instead of freeing the descriptor.
- Add the callback tegra_adma_synchronize() that calls
vchan_synchronize() which kills any pending tasklets and frees any
terminated descriptors.
Crash logs:
[ 337.427523] BUG: KASAN: use-after-free in vchan_complete+0x124/0x3b0
[ 337.427544] Read of size 8 at addr ffff000132055428 by task swapper/0/0
[ 337.427562] Call trace:
[ 337.427564] dump_backtrace+0x0/0x320
[ 337.427571] show_stack+0x20/0x30
[ 337.427575] dump_stack_lvl+0x68/0x84
[ 337.427584] print_address_description.constprop.0+0x74/0x2b8
[ 337.427590] kasan_report+0x1f4/0x210
[ 337.427598] __asan_load8+0xa0/0xd0
[ 337.427603] vchan_complete+0x124/0x3b0
[ 337.427609] tasklet_action_common.constprop.0+0x190/0x1d0
[ 337.427617] tasklet_action+0x30/0x40
[ 337.427623] __do_softirq+0x1a0/0x5c4
[ 337.427628] irq_exit+0x110/0x140
[ 337.427633] handle_domain_irq+0xa4/0xe0
[ 337.427640] gic_handle_irq+0x64/0x160
[ 337.427644] call_on_irq_stack+0x20/0x4c
[ 337.427649] do_interrupt_handler+0x7c/0x90
[ 337.427654] el1_interrupt+0x30/0x80
[ 337.427659] el1h_64_irq_handler+0x18/0x30
[ 337.427663] el1h_64_irq+0x7c/0x80
[ 337.427667] cpuidle_enter_state+0xe4/0x540
[ 337.427674] cpuidle_enter+0x54/0x80
[ 337.427679] do_idle+0x2e0/0x380
[ 337.427685] cpu_startup_entry+0x2c/0x70
[ 337.427690] rest_init+0x114/0x130
[ 337.427695] arch_call_rest_init+0x18/0x24
[ 337.427702] start_kernel+0x380/0x3b4
[ 337.427706] __primary_switched+0xc0/0xc8 |
| In the Linux kernel, the following vulnerability has been resolved:
ipv4: ip_gre: make ipgre_header() robust
Analog to commit db5b4e39c4e6 ("ip6_gre: make ip6gre_header() robust")
Over the years, syzbot found many ways to crash the kernel
in ipgre_header() [1].
This involves team or bonding drivers ability to dynamically
change their dev->needed_headroom and/or dev->hard_header_len
In this particular crash mld_newpack() allocated an skb
with a too small reserve/headroom, and by the time mld_sendpack()
was called, syzbot managed to attach an ipgre device.
[1]
skbuff: skb_under_panic: text:ffffffff89ea3cb7 len:2030915468 put:2030915372 head:ffff888058b43000 data:ffff887fdfa6e194 tail:0x120 end:0x6c0 dev:team0
kernel BUG at net/core/skbuff.c:213 !
Oops: invalid opcode: 0000 [#1] SMP KASAN PTI
CPU: 1 UID: 0 PID: 1322 Comm: kworker/1:9 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/25/2025
Workqueue: mld mld_ifc_work
RIP: 0010:skb_panic+0x157/0x160 net/core/skbuff.c:213
Call Trace:
<TASK>
skb_under_panic net/core/skbuff.c:223 [inline]
skb_push+0xc3/0xe0 net/core/skbuff.c:2641
ipgre_header+0x67/0x290 net/ipv4/ip_gre.c:897
dev_hard_header include/linux/netdevice.h:3436 [inline]
neigh_connected_output+0x286/0x460 net/core/neighbour.c:1618
NF_HOOK_COND include/linux/netfilter.h:307 [inline]
ip6_output+0x340/0x550 net/ipv6/ip6_output.c:247
NF_HOOK+0x9e/0x380 include/linux/netfilter.h:318
mld_sendpack+0x8d4/0xe60 net/ipv6/mcast.c:1855
mld_send_cr net/ipv6/mcast.c:2154 [inline]
mld_ifc_work+0x83e/0xd60 net/ipv6/mcast.c:2693
process_one_work kernel/workqueue.c:3257 [inline]
process_scheduled_works+0xad1/0x1770 kernel/workqueue.c:3340
worker_thread+0x8a0/0xda0 kernel/workqueue.c:3421
kthread+0x711/0x8a0 kernel/kthread.c:463
ret_from_fork+0x510/0xa50 arch/x86/kernel/process.c:158
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:246 |
| In the Linux kernel, the following vulnerability has been resolved:
net: can: j1939: j1939_xtp_rx_rts_session_active(): deactivate session upon receiving the second rts
Since j1939_session_deactivate_activate_next() in j1939_tp_rxtimer() is
called only when the timer is enabled, we need to call
j1939_session_deactivate_activate_next() if we cancelled the timer.
Otherwise, refcount for j1939_session leaks, which will later appear as
| unregister_netdevice: waiting for vcan0 to become free. Usage count = 2.
problem. |
| In the Linux kernel, the following vulnerability has been resolved:
gpiolib: fix race condition for gdev->srcu
If two drivers were calling gpiochip_add_data_with_key(), one may be
traversing the srcu-protected list in gpio_name_to_desc(), meanwhile
other has just added its gdev in gpiodev_add_to_list_unlocked().
This creates a non-mutexed and non-protected timeframe, when one
instance is dereferencing and using &gdev->srcu, before the other
has initialized it, resulting in crash:
[ 4.935481] Unable to handle kernel paging request at virtual address ffff800272bcc000
[ 4.943396] Mem abort info:
[ 4.943400] ESR = 0x0000000096000005
[ 4.943403] EC = 0x25: DABT (current EL), IL = 32 bits
[ 4.943407] SET = 0, FnV = 0
[ 4.943410] EA = 0, S1PTW = 0
[ 4.943413] FSC = 0x05: level 1 translation fault
[ 4.943416] Data abort info:
[ 4.943418] ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000
[ 4.946220] CM = 0, WnR = 0, TnD = 0, TagAccess = 0
[ 4.955261] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[ 4.955268] swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000038e6c000
[ 4.961449] [ffff800272bcc000] pgd=0000000000000000
[ 4.969203] , p4d=1000000039739003
[ 4.979730] , pud=0000000000000000
[ 4.980210] phandle (CPU): 0x0000005e, phandle (BE): 0x5e000000 for node "reset"
[ 4.991736] Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP
...
[ 5.121359] pc : __srcu_read_lock+0x44/0x98
[ 5.131091] lr : gpio_name_to_desc+0x60/0x1a0
[ 5.153671] sp : ffff8000833bb430
[ 5.298440]
[ 5.298443] Call trace:
[ 5.298445] __srcu_read_lock+0x44/0x98
[ 5.309484] gpio_name_to_desc+0x60/0x1a0
[ 5.320692] gpiochip_add_data_with_key+0x488/0xf00
5.946419] ---[ end trace 0000000000000000 ]---
Move initialization code for gdev fields before it is added to
gpio_devices, with adjacent initialization code.
Adjust goto statements to reflect modified order of operations
[Bartosz: fixed a build issue, removed stray newline] |
| In the Linux kernel, the following vulnerability has been resolved:
lib/buildid: use __kernel_read() for sleepable context
Prevent a "BUG: unable to handle kernel NULL pointer dereference in
filemap_read_folio".
For the sleepable context, convert freader to use __kernel_read() instead
of direct page cache access via read_cache_folio(). This simplifies the
faultable code path by using the standard kernel file reading interface
which handles all the complexity of reading file data.
At the moment we are not changing the code for non-sleepable context which
uses filemap_get_folio() and only succeeds if the target folios are
already in memory and up-to-date. The reason is to keep the patch simple
and easier to backport to stable kernels.
Syzbot repro does not crash the kernel anymore and the selftests run
successfully.
In the follow up we will make __kernel_read() with IOCB_NOWAIT work for
non-sleepable contexts. In addition, I would like to replace the
secretmem check with a more generic approach and will add fstest for the
buildid code. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Don't store mlx5e_priv in mlx5e_dev devlink priv
mlx5e_priv is an unstable structure that can be memset(0) if profile
attaching fails, mlx5e_priv in mlx5e_dev devlink private is used to
reference the netdev and mdev associated with that struct. Instead,
store netdev directly into mlx5e_dev and get mdev from the containing
mlx5_adev aux device structure.
This fixes a kernel oops in mlx5e_remove when switchdev mode fails due
to change profile failure.
$ devlink dev eswitch set pci/0000:00:03.0 mode switchdev
Error: mlx5_core: Failed setting eswitch to offloads.
dmesg:
workqueue: Failed to create a rescuer kthread for wq "mlx5e": -EINTR
mlx5_core 0012:03:00.1: mlx5e_netdev_init_profile:6214:(pid 37199): mlx5e_priv_init failed, err=-12
mlx5_core 0012:03:00.1 gpu3rdma1: mlx5e_netdev_change_profile: new profile init failed, -12
workqueue: Failed to create a rescuer kthread for wq "mlx5e": -EINTR
mlx5_core 0012:03:00.1: mlx5e_netdev_init_profile:6214:(pid 37199): mlx5e_priv_init failed, err=-12
mlx5_core 0012:03:00.1 gpu3rdma1: mlx5e_netdev_change_profile: failed to rollback to orig profile, -12
$ devlink dev reload pci/0000:00:03.0 ==> oops
BUG: kernel NULL pointer dereference, address: 0000000000000520
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: Oops: 0000 [#1] SMP NOPTI
CPU: 3 UID: 0 PID: 521 Comm: devlink Not tainted 6.18.0-rc5+ #117 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-2.fc40 04/01/2014
RIP: 0010:mlx5e_remove+0x68/0x130
RSP: 0018:ffffc900034838f0 EFLAGS: 00010246
RAX: ffff88810283c380 RBX: ffff888101874400 RCX: ffffffff826ffc45
RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000000
RBP: ffff888102d789c0 R08: ffff8881007137f0 R09: ffff888100264e10
R10: ffffc90003483898 R11: ffffc900034838a0 R12: ffff888100d261a0
R13: ffff888100d261a0 R14: ffff8881018749a0 R15: ffff888101874400
FS: 00007f8565fea740(0000) GS:ffff88856a759000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000520 CR3: 000000010b11a004 CR4: 0000000000370ef0
Call Trace:
<TASK>
device_release_driver_internal+0x19c/0x200
bus_remove_device+0xc6/0x130
device_del+0x160/0x3d0
? devl_param_driverinit_value_get+0x2d/0x90
mlx5_detach_device+0x89/0xe0
mlx5_unload_one_devl_locked+0x3a/0x70
mlx5_devlink_reload_down+0xc8/0x220
devlink_reload+0x7d/0x260
devlink_nl_reload_doit+0x45b/0x5a0
genl_family_rcv_msg_doit+0xe8/0x140 |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: Fix use-after-free in inet6_addr_del().
syzbot reported use-after-free of inet6_ifaddr in
inet6_addr_del(). [0]
The cited commit accidentally moved ipv6_del_addr() for
mngtmpaddr before reading its ifp->flags for temporary
addresses in inet6_addr_del().
Let's move ipv6_del_addr() down to fix the UAF.
[0]:
BUG: KASAN: slab-use-after-free in inet6_addr_del.constprop.0+0x67a/0x6b0 net/ipv6/addrconf.c:3117
Read of size 4 at addr ffff88807b89c86c by task syz.3.1618/9593
CPU: 0 UID: 0 PID: 9593 Comm: syz.3.1618 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/25/2025
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0xcd/0x630 mm/kasan/report.c:482
kasan_report+0xe0/0x110 mm/kasan/report.c:595
inet6_addr_del.constprop.0+0x67a/0x6b0 net/ipv6/addrconf.c:3117
addrconf_del_ifaddr+0x11e/0x190 net/ipv6/addrconf.c:3181
inet6_ioctl+0x1e5/0x2b0 net/ipv6/af_inet6.c:582
sock_do_ioctl+0x118/0x280 net/socket.c:1254
sock_ioctl+0x227/0x6b0 net/socket.c:1375
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:597 [inline]
__se_sys_ioctl fs/ioctl.c:583 [inline]
__x64_sys_ioctl+0x18e/0x210 fs/ioctl.c:583
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xcd/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f164cf8f749
Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f164de64038 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00007f164d1e5fa0 RCX: 00007f164cf8f749
RDX: 0000200000000000 RSI: 0000000000008936 RDI: 0000000000000003
RBP: 00007f164d013f91 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007f164d1e6038 R14: 00007f164d1e5fa0 R15: 00007ffde15c8288
</TASK>
Allocated by task 9593:
kasan_save_stack+0x33/0x60 mm/kasan/common.c:56
kasan_save_track+0x14/0x30 mm/kasan/common.c:77
poison_kmalloc_redzone mm/kasan/common.c:397 [inline]
__kasan_kmalloc+0xaa/0xb0 mm/kasan/common.c:414
kmalloc_noprof include/linux/slab.h:957 [inline]
kzalloc_noprof include/linux/slab.h:1094 [inline]
ipv6_add_addr+0x4e3/0x2010 net/ipv6/addrconf.c:1120
inet6_addr_add+0x256/0x9b0 net/ipv6/addrconf.c:3050
addrconf_add_ifaddr+0x1fc/0x450 net/ipv6/addrconf.c:3160
inet6_ioctl+0x103/0x2b0 net/ipv6/af_inet6.c:580
sock_do_ioctl+0x118/0x280 net/socket.c:1254
sock_ioctl+0x227/0x6b0 net/socket.c:1375
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:597 [inline]
__se_sys_ioctl fs/ioctl.c:583 [inline]
__x64_sys_ioctl+0x18e/0x210 fs/ioctl.c:583
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xcd/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Freed by task 6099:
kasan_save_stack+0x33/0x60 mm/kasan/common.c:56
kasan_save_track+0x14/0x30 mm/kasan/common.c:77
kasan_save_free_info+0x3b/0x60 mm/kasan/generic.c:584
poison_slab_object mm/kasan/common.c:252 [inline]
__kasan_slab_free+0x5f/0x80 mm/kasan/common.c:284
kasan_slab_free include/linux/kasan.h:234 [inline]
slab_free_hook mm/slub.c:2540 [inline]
slab_free_freelist_hook mm/slub.c:2569 [inline]
slab_free_bulk mm/slub.c:6696 [inline]
kmem_cache_free_bulk mm/slub.c:7383 [inline]
kmem_cache_free_bulk+0x2bf/0x680 mm/slub.c:7362
kfree_bulk include/linux/slab.h:830 [inline]
kvfree_rcu_bulk+0x1b7/0x1e0 mm/slab_common.c:1523
kvfree_rcu_drain_ready mm/slab_common.c:1728 [inline]
kfree_rcu_monitor+0x1d0/0x2f0 mm/slab_common.c:1801
process_one_work+0x9ba/0x1b20 kernel/workqueue.c:3257
process_scheduled_works kernel/workqu
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix reference count leak in bpf_prog_test_run_xdp()
syzbot is reporting
unregister_netdevice: waiting for sit0 to become free. Usage count = 2
problem. A debug printk() patch found that a refcount is obtained at
xdp_convert_md_to_buff() from bpf_prog_test_run_xdp().
According to commit ec94670fcb3b ("bpf: Support specifying ingress via
xdp_md context in BPF_PROG_TEST_RUN"), the refcount obtained by
xdp_convert_md_to_buff() will be released by xdp_convert_buff_to_md().
Therefore, we can consider that the error handling path introduced by
commit 1c1949982524 ("bpf: introduce frags support to
bpf_prog_test_run_xdp()") forgot to call xdp_convert_buff_to_md(). |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Fix crash on profile change rollback failure
mlx5e_netdev_change_profile can fail to attach a new profile and can
fail to rollback to old profile, in such case, we could end up with a
dangling netdev with a fully reset netdev_priv. A retry to change
profile, e.g. another attempt to call mlx5e_netdev_change_profile via
switchdev mode change, will crash trying to access the now NULL
priv->mdev.
This fix allows mlx5e_netdev_change_profile() to handle previous
failures and an empty priv, by not assuming priv is valid.
Pass netdev and mdev to all flows requiring
mlx5e_netdev_change_profile() and avoid passing priv.
In mlx5e_netdev_change_profile() check if current priv is valid, and if
not, just attach the new profile without trying to access the old one.
This fixes the following oops, when enabling switchdev mode for the 2nd
time after first time failure:
## Enabling switchdev mode first time:
mlx5_core 0012:03:00.1: E-Switch: Supported tc chains and prios offload
workqueue: Failed to create a rescuer kthread for wq "mlx5e": -EINTR
mlx5_core 0012:03:00.1: mlx5e_netdev_init_profile:6214:(pid 37199): mlx5e_priv_init failed, err=-12
mlx5_core 0012:03:00.1 gpu3rdma1: mlx5e_netdev_change_profile: new profile init failed, -12
workqueue: Failed to create a rescuer kthread for wq "mlx5e": -EINTR
mlx5_core 0012:03:00.1: mlx5e_netdev_init_profile:6214:(pid 37199): mlx5e_priv_init failed, err=-12
mlx5_core 0012:03:00.1 gpu3rdma1: mlx5e_netdev_change_profile: failed to rollback to orig profile, -12
^^^^^^^^
mlx5_core 0000:00:03.0: E-Switch: Disable: mode(LEGACY), nvfs(0), necvfs(0), active vports(0)
## retry: Enabling switchdev mode 2nd time:
mlx5_core 0000:00:03.0: E-Switch: Supported tc chains and prios offload
BUG: kernel NULL pointer dereference, address: 0000000000000038
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: Oops: 0000 [#1] SMP NOPTI
CPU: 13 UID: 0 PID: 520 Comm: devlink Not tainted 6.18.0-rc4+ #91 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-2.fc40 04/01/2014
RIP: 0010:mlx5e_detach_netdev+0x3c/0x90
Code: 50 00 00 f0 80 4f 78 02 48 8b bf e8 07 00 00 48 85 ff 74 16 48 8b 73 78 48 d1 ee 83 e6 01 83 f6 01 40 0f b6 f6 e8 c4 42 00 00 <48> 8b 45 38 48 85 c0 74 08 48 89 df e8 cc 47 40 1e 48 8b bb f0 07
RSP: 0018:ffffc90000673890 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff8881036a89c0 RCX: 0000000000000000
RDX: ffff888113f63800 RSI: ffffffff822fe720 RDI: 0000000000000000
RBP: 0000000000000000 R08: 0000000000002dcd R09: 0000000000000000
R10: ffffc900006738e8 R11: 00000000ffffffff R12: 0000000000000000
R13: 0000000000000000 R14: ffff8881036a89c0 R15: 0000000000000000
FS: 00007fdfb8384740(0000) GS:ffff88856a9d6000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000038 CR3: 0000000112ae0005 CR4: 0000000000370ef0
Call Trace:
<TASK>
mlx5e_netdev_change_profile+0x45/0xb0
mlx5e_vport_rep_load+0x27b/0x2d0
mlx5_esw_offloads_rep_load+0x72/0xf0
esw_offloads_enable+0x5d0/0x970
mlx5_eswitch_enable_locked+0x349/0x430
? is_mp_supported+0x57/0xb0
mlx5_devlink_eswitch_mode_set+0x26b/0x430
devlink_nl_eswitch_set_doit+0x6f/0xf0
genl_family_rcv_msg_doit+0xe8/0x140
genl_rcv_msg+0x18b/0x290
? __pfx_devlink_nl_pre_doit+0x10/0x10
? __pfx_devlink_nl_eswitch_set_doit+0x10/0x10
? __pfx_devlink_nl_post_doit+0x10/0x10
? __pfx_genl_rcv_msg+0x10/0x10
netlink_rcv_skb+0x52/0x100
genl_rcv+0x28/0x40
netlink_unicast+0x282/0x3e0
? __alloc_skb+0xd6/0x190
netlink_sendmsg+0x1f7/0x430
__sys_sendto+0x213/0x220
? __sys_recvmsg+0x6a/0xd0
__x64_sys_sendto+0x24/0x30
do_syscall_64+0x50/0x1f0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7fdfb8495047 |
| In the Linux kernel, the following vulnerability has been resolved:
macvlan: fix possible UAF in macvlan_forward_source()
Add RCU protection on (struct macvlan_source_entry)->vlan.
Whenever macvlan_hash_del_source() is called, we must clear
entry->vlan pointer before RCU grace period starts.
This allows macvlan_forward_source() to skip over
entries queued for freeing.
Note that macvlan_dev are already RCU protected, as they
are embedded in a standard netdev (netdev_priv(ndev)).
https: //lore.kernel.org/netdev/695fb1e8.050a0220.1c677c.039f.GAE@google.com/T/#u |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: act_api: avoid dereferencing ERR_PTR in tcf_idrinfo_destroy
syzbot reported a crash in tc_act_in_hw() during netns teardown where
tcf_idrinfo_destroy() passed an ERR_PTR(-EBUSY) value as a tc_action
pointer, leading to an invalid dereference.
Guard against ERR_PTR entries when iterating the action IDR so teardown
does not call tc_act_in_hw() on an error pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
cnic: Fix use-after-free bugs in cnic_delete_task
The original code uses cancel_delayed_work() in cnic_cm_stop_bnx2x_hw(),
which does not guarantee that the delayed work item 'delete_task' has
fully completed if it was already running. Additionally, the delayed work
item is cyclic, the flush_workqueue() in cnic_cm_stop_bnx2x_hw() only
blocks and waits for work items that were already queued to the
workqueue prior to its invocation. Any work items submitted after
flush_workqueue() is called are not included in the set of tasks that the
flush operation awaits. This means that after the cyclic work items have
finished executing, a delayed work item may still exist in the workqueue.
This leads to use-after-free scenarios where the cnic_dev is deallocated
by cnic_free_dev(), while delete_task remains active and attempt to
dereference cnic_dev in cnic_delete_task().
A typical race condition is illustrated below:
CPU 0 (cleanup) | CPU 1 (delayed work callback)
cnic_netdev_event() |
cnic_stop_hw() | cnic_delete_task()
cnic_cm_stop_bnx2x_hw() | ...
cancel_delayed_work() | /* the queue_delayed_work()
flush_workqueue() | executes after flush_workqueue()*/
| queue_delayed_work()
cnic_free_dev(dev)//free | cnic_delete_task() //new instance
| dev = cp->dev; //use
Replace cancel_delayed_work() with cancel_delayed_work_sync() to ensure
that the cyclic delayed work item is properly canceled and that any
ongoing execution of the work item completes before the cnic_dev is
deallocated. Furthermore, since cancel_delayed_work_sync() uses
__flush_work(work, true) to synchronously wait for any currently
executing instance of the work item to finish, the flush_workqueue()
becomes redundant and should be removed.
This bug was identified through static analysis. To reproduce the issue
and validate the fix, I simulated the cnic PCI device in QEMU and
introduced intentional delays — such as inserting calls to ssleep()
within the cnic_delete_task() function — to increase the likelihood
of triggering the bug. |
| In the Linux kernel, the following vulnerability has been resolved:
thermal: intel_powerclamp: Use get_cpu() instead of smp_processor_id() to avoid crash
When CPU 0 is offline and intel_powerclamp is used to inject
idle, it generates kernel BUG:
BUG: using smp_processor_id() in preemptible [00000000] code: bash/15687
caller is debug_smp_processor_id+0x17/0x20
CPU: 4 PID: 15687 Comm: bash Not tainted 5.19.0-rc7+ #57
Call Trace:
<TASK>
dump_stack_lvl+0x49/0x63
dump_stack+0x10/0x16
check_preemption_disabled+0xdd/0xe0
debug_smp_processor_id+0x17/0x20
powerclamp_set_cur_state+0x7f/0xf9 [intel_powerclamp]
...
...
Here CPU 0 is the control CPU by default and changed to the current CPU,
if CPU 0 offlined. This check has to be performed under cpus_read_lock(),
hence the above warning.
Use get_cpu() instead of smp_processor_id() to avoid this BUG.
[ rjw: Subject edits ] |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Fix crash when I/O abort times out
While performing CPU hotplug, a crash with the following stack was seen:
Call Trace:
qla24xx_process_response_queue+0x42a/0x970 [qla2xxx]
qla2x00_start_nvme_mq+0x3a2/0x4b0 [qla2xxx]
qla_nvme_post_cmd+0x166/0x240 [qla2xxx]
nvme_fc_start_fcp_op.part.0+0x119/0x2e0 [nvme_fc]
blk_mq_dispatch_rq_list+0x17b/0x610
__blk_mq_sched_dispatch_requests+0xb0/0x140
blk_mq_sched_dispatch_requests+0x30/0x60
__blk_mq_run_hw_queue+0x35/0x90
__blk_mq_delay_run_hw_queue+0x161/0x180
blk_execute_rq+0xbe/0x160
__nvme_submit_sync_cmd+0x16f/0x220 [nvme_core]
nvmf_connect_admin_queue+0x11a/0x170 [nvme_fabrics]
nvme_fc_create_association.cold+0x50/0x3dc [nvme_fc]
nvme_fc_connect_ctrl_work+0x19/0x30 [nvme_fc]
process_one_work+0x1e8/0x3c0
On abort timeout, completion was called without checking if the I/O was
already completed.
Verify that I/O and abort request are indeed outstanding before attempting
completion. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm: fix use-after-free on probe deferral
The bridge counter was never reset when tearing down the DRM device so
that stale pointers to deallocated structures would be accessed on the
next tear down (e.g. after a second late bind deferral).
Given enough bridges and a few probe deferrals this could currently also
lead to data beyond the bridge array being corrupted.
Patchwork: https://patchwork.freedesktop.org/patch/502665/ |
| In the Linux kernel, the following vulnerability has been resolved:
null_blk: fix poll request timeout handling
When doing io_uring benchmark on /dev/nullb0, it's easy to crash the
kernel if poll requests timeout triggered, as reported by David. [1]
BUG: kernel NULL pointer dereference, address: 0000000000000008
Workqueue: kblockd blk_mq_timeout_work
RIP: 0010:null_timeout_rq+0x4e/0x91
Call Trace:
? null_timeout_rq+0x4e/0x91
blk_mq_handle_expired+0x31/0x4b
bt_iter+0x68/0x84
? bt_tags_iter+0x81/0x81
__sbitmap_for_each_set.constprop.0+0xb0/0xf2
? __blk_mq_complete_request_remote+0xf/0xf
bt_for_each+0x46/0x64
? __blk_mq_complete_request_remote+0xf/0xf
? percpu_ref_get_many+0xc/0x2a
blk_mq_queue_tag_busy_iter+0x14d/0x18e
blk_mq_timeout_work+0x95/0x127
process_one_work+0x185/0x263
worker_thread+0x1b5/0x227
This is indeed a race problem between null_timeout_rq() and null_poll().
null_poll() null_timeout_rq()
spin_lock(&nq->poll_lock)
list_splice_init(&nq->poll_list, &list)
spin_unlock(&nq->poll_lock)
while (!list_empty(&list))
req = list_first_entry()
list_del_init()
...
blk_mq_add_to_batch()
// req->rq_next = NULL
spin_lock(&nq->poll_lock)
// rq->queuelist->next == NULL
list_del_init(&rq->queuelist)
spin_unlock(&nq->poll_lock)
Fix these problems by setting requests state to MQ_RQ_COMPLETE under
nq->poll_lock protection, in which null_timeout_rq() can safely detect
this race and early return.
Note this patch just fix the kernel panic when request timeout happen.
[1] https://lore.kernel.org/all/3893581.1691785261@warthog.procyon.org.uk/ |
| In the Linux kernel, the following vulnerability has been resolved:
zram: fix slot write race condition
Parallel concurrent writes to the same zram index result in leaked
zsmalloc handles. Schematically we can have something like this:
CPU0 CPU1
zram_slot_lock()
zs_free(handle)
zram_slot_lock()
zram_slot_lock()
zs_free(handle)
zram_slot_lock()
compress compress
handle = zs_malloc() handle = zs_malloc()
zram_slot_lock
zram_set_handle(handle)
zram_slot_lock
zram_slot_lock
zram_set_handle(handle)
zram_slot_lock
Either CPU0 or CPU1 zsmalloc handle will leak because zs_free() is done
too early. In fact, we need to reset zram entry right before we set its
new handle, all under the same slot lock scope. |
| In the Linux kernel, the following vulnerability has been resolved:
dm-stripe: fix a possible integer overflow
There's a possible integer overflow in stripe_io_hints if we have too
large chunk size. Test if the overflow happened, and if it did, don't set
limits->io_min and limits->io_opt; |
