| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Issue summary: An uncommon configuration of clients performing DANE TLSA-based
server authentication, when paired with uncommon server DANE TLSA records, may
result in a use-after-free and/or double-free on the client side.
Impact summary: A use after free can have a range of potential consequences
such as the corruption of valid data, crashes or execution of arbitrary code.
However, the issue only affects clients that make use of TLSA records with both
the PKIX-TA(0/PKIX-EE(1) certificate usages and the DANE-TA(2) certificate
usage.
By far the most common deployment of DANE is in SMTP MTAs for which RFC7672
recommends that clients treat as 'unusable' any TLSA records that have the PKIX
certificate usages. These SMTP (or other similar) clients are not vulnerable
to this issue. Conversely, any clients that support only the PKIX usages, and
ignore the DANE-TA(2) usage are also not vulnerable.
The client would also need to be communicating with a server that publishes a
TLSA RRset with both types of TLSA records.
No FIPS modules are affected by this issue, the problem code is outside the
FIPS module boundary. |
| Issue summary: Applications using AES-CFB128 encryption or decryption on
systems with AVX-512 and VAES support can trigger an out-of-bounds read
of up to 15 bytes when processing partial cipher blocks.
Impact summary: This out-of-bounds read may trigger a crash which leads to
Denial of Service for an application if the input buffer ends at a memory
page boundary and the following page is unmapped. There is no information
disclosure as the over-read bytes are not written to output.
The vulnerable code path is only reached when processing partial blocks
(when a previous call left an incomplete block and the current call provides
fewer bytes than needed to complete it). Additionally, the input buffer
must be positioned at a page boundary with the following page unmapped.
CFB mode is not used in TLS/DTLS protocols, which use CBC, GCM, CCM, or
ChaCha20-Poly1305 instead. For these reasons the issue was assessed as
Low severity according to our Security Policy.
Only x86-64 systems with AVX-512 and VAES instruction support are affected.
Other architectures and systems without VAES support use different code
paths that are not affected.
OpenSSL FIPS module in 3.6 version is affected by this issue. |
| The webbrowser.open() API would accept leading dashes in the URL which
could be handled as command line options for certain web browsers. New
behavior rejects leading dashes. Users are recommended to sanitize URLs
prior to passing to webbrowser.open(). |
| When an Expat parser with a registered ElementDeclHandler parses an inline
document type definition containing a deeply nested content model a C stack
overflow occurs. |
| The fix for CVE-2026-0672, which rejected control characters in http.cookies.Morsel, was incomplete. The Morsel.update(), |= operator, and unpickling paths were not patched, allowing control characters to bypass input validation. Additionally, BaseCookie.js_output() lacked the output validation applied to BaseCookie.output(). |
| DISPUTED: The project has clarified that the documentation was incorrect, and that pkgutil.get_data() has the same security model as open(). The documentation has been updated to clarify this point. There is no vulnerability in the function if following the intended security model.
pkgutil.get_data() did not validate the resource argument as documented, allowing path traversals. |
| The import hook in CPython that handles legacy *.pyc files (SourcelessFileLoader) is incorrectly handled in FileLoader (a base class) and so does not use io.open_code() to read the .pyc files. sys.audit handlers for this audit event therefore do not fire. |
| The "tarfile" module would still apply normalization of AREGTYPE (\x00) blocks to DIRTYPE, even while processing a multi-block member such as GNUTYPE_LONGNAME or GNUTYPE_LONGLINK. This could result in a crafted tar archive being misinterpreted by the tarfile module compared to other implementations. |
| A file access issue was addressed with improved input validation. This issue is fixed in macOS Tahoe 26.4. An attacker may gain access to protected parts of the file system. |
| CI4MS is a CodeIgniter 4-based CMS skeleton that delivers a production-ready, modular architecture with RBAC authorization and theme support. Prior to version 0.31.0.0, the application fails to properly sanitize user-controlled input when handling backup uploads and processing backup metadata. An attacker can inject a malicious JavaScript payload into the backup filename via the uploaded xss.sql, which uses SQL functionality to insert the XSS payload server-side. This stored payload is later rendered unsafely in multiple backup management views without proper output encoding, leading to stored blind cross-site scripting (Blind XSS). This issue has been patched in version 0.31.0.0. |
| CI4MS is a CodeIgniter 4-based CMS skeleton that delivers a production-ready, modular architecture with RBAC authorization and theme support. Prior to version 0.31.0.0, the application fails to properly sanitize user-controlled input when adding Pages to navigation menus through the Menu Management functionality. Page-related data selected via the Pages section is stored server-side and rendered without proper output encoding. This stored payload is later rendered unsafely within administrative interfaces and public-facing navigation menus, leading to stored DOM-based cross-site scripting (XSS). This issue has been patched in version 0.31.0.0. |
| Postiz is an AI social media scheduling tool. Prior to version 2.21.4, the POST /webhooks/ endpoint for creating webhooks uses WebhooksDto which validates the url field with only @IsUrl() (format check), missing the @IsSafeWebhookUrl validator that blocks internal/private network addresses. The update (PUT /webhooks/) and test (POST /webhooks/send) endpoints correctly apply @IsSafeWebhookUrl. When a post is published, the orchestrator fetches the stored webhook URL without runtime validation, enabling blind SSRF against internal services. This issue has been patched in version 2.21.4. |
| Postiz is an AI social media scheduling tool. Prior to version 2.21.3, the GET /public/stream endpoint in PublicController accepts a user-supplied url query parameter and proxies the full HTTP response back to the caller. The only validation is url.endsWith('mp4'), which is trivially bypassable by appending .mp4 as a query parameter value or URL fragment. The endpoint requires no authentication and has no SSRF protections, allowing an unauthenticated attacker to read responses from internal services, cloud metadata endpoints, and other network-internal resources. This issue has been patched in version 2.21.3. |
| Postiz is an AI social media scheduling tool. Prior to version 2.21.3, the POST /public/v1/upload-from-url endpoint accepts a user-supplied URL and fetches it server-side using axios.get() with no SSRF protections. The only validation is a file extension check (.png, .jpg, etc.) which is trivially bypassed by appending an image extension to any URL path. An authenticated API user can fetch internal network resources, cloud instance metadata, and other internal services, with the response data uploaded to storage and returned to the attacker. This issue has been patched in version 2.21.3. |
| Giskard is an open-source Python library for testing and evaluating agentic systems. Prior to versions 0.3.4 and 1.0.2b1, ChatWorkflow.chat(message) passes its string argument directly as a Jinja2 template source to a non-sandboxed Environment. A developer who passes user input to this method enables full remote code execution via Jinja2 class traversal. The method name chat and parameter name message naturally invite passing user input directly, but the string is silently parsed as a Jinja2 template, not treated as plain text. This issue has been patched in versions 0.3.4 and 1.0.2b1. |
| Suricata is a network IDS, IPS and NSM engine. Prior to versions 7.0.15 and 8.0.4, flooding of craft HTTP2 continuation frames can lead to memory exhaustion, usually resulting in the Suricata process being shut down by the operating system. This issue has been patched in versions 7.0.15 and 8.0.4. |
| Suricata is a network IDS, IPS and NSM engine. From version 8.0.0 to before version 8.0.4, there is a quadratic complexity issue when searching for URLs in mime encoded messages over SMTP leading to a performance impact. This issue has been patched in version 8.0.4. |
| Suricata is a network IDS, IPS and NSM engine. Prior to version 7.0.15, inefficiency in DCERPC buffering can lead to a performance degradation. This issue has been patched in version 7.0.15. |
| OpenSTAManager is an open source management software for technical assistance and invoicing. Prior to version 2.10.2, the oauth2.php file in OpenSTAManager is an unauthenticated endpoint ($skip_permissions = true). It loads a record from the zz_oauth2 table using the attacker-controlled GET parameter state, and during the OAuth2 configuration flow calls unserialize() on the access_token field without any class restriction. This issue has been patched in version 2.10.2. |
| OpenSTAManager is an open source management software for technical assistance and invoicing. Prior to version 2.10.2, multiple AJAX select handlers in OpenSTAManager are vulnerable to Time-Based Blind SQL Injection through the options[stato] GET parameter. The user-supplied value is read from $superselect['stato'] and concatenated directly into SQL WHERE clauses as a bare expression, without any sanitization, parameterization, or allowlist validation. An authenticated attacker can inject arbitrary SQL statements to extract sensitive data from the database, including usernames, password hashes, financial records, and any other information stored in the MySQL database. This issue has been patched in version 2.10.2. |
