| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net/handshake: restore destructor on submit failure
handshake_req_submit() replaces sk->sk_destruct but never restores it when
submission fails before the request is hashed. handshake_sk_destruct() then
returns early and the original destructor never runs, leaking the socket.
Restore sk_destruct on the error path. |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: mpsse: ensure worker is torn down
When an IRQ worker is running, unplugging the device would cause a
crash. The sealevel hardware this driver was written for was not
hotpluggable, so I never realized it.
This change uses a spinlock to protect a list of workers, which
it tears down on disconnect. |
| In the Linux kernel, the following vulnerability has been resolved:
idpf: detach and close netdevs while handling a reset
Protect the reset path from callbacks by setting the netdevs to detached
state and close any netdevs in UP state until the reset handling has
completed. During a reset, the driver will de-allocate resources for the
vport, and there is no guarantee that those will recover, which is why the
existing vport_ctrl_lock does not provide sufficient protection.
idpf_detach_and_close() is called right before reset handling. If the
reset handling succeeds, the netdevs state is recovered via call to
idpf_attach_and_open(). If the reset handling fails the netdevs remain
down. The detach/down calls are protected with RTNL lock to avoid racing
with callbacks. On the recovery side the attach can be done without
holding the RTNL lock as there are no callbacks expected at that point,
due to detach/close always being done first in that flow.
The previous logic restoring the netdevs state based on the
IDPF_VPORT_UP_REQUESTED flag in the init task is not needed anymore, hence
the removal of idpf_set_vport_state(). The IDPF_VPORT_UP_REQUESTED is
still being used to restore the state of the netdevs following the reset,
but has no use outside of the reset handling flow.
idpf_init_hard_reset() is converted to void, since it was used as such and
there is no error handling being done based on its return value.
Before this change, invoking hard and soft resets simultaneously will
cause the driver to lose the vport state:
ip -br a
<inf> UP
echo 1 > /sys/class/net/ens801f0/device/reset& \
ethtool -L ens801f0 combined 8
ip -br a
<inf> DOWN
ip link set <inf> up
ip -br a
<inf> DOWN
Also in case of a failure in the reset path, the netdev is left
exposed to external callbacks, while vport resources are not
initialized, leading to a crash on subsequent ifup/down:
[408471.398966] idpf 0000:83:00.0: HW reset detected
[408471.411744] idpf 0000:83:00.0: Device HW Reset initiated
[408472.277901] idpf 0000:83:00.0: The driver was unable to contact the device's firmware. Check that the FW is running. Driver state= 0x2
[408508.125551] BUG: kernel NULL pointer dereference, address: 0000000000000078
[408508.126112] #PF: supervisor read access in kernel mode
[408508.126687] #PF: error_code(0x0000) - not-present page
[408508.127256] PGD 2aae2f067 P4D 0
[408508.127824] Oops: Oops: 0000 [#1] SMP NOPTI
...
[408508.130871] RIP: 0010:idpf_stop+0x39/0x70 [idpf]
...
[408508.139193] Call Trace:
[408508.139637] <TASK>
[408508.140077] __dev_close_many+0xbb/0x260
[408508.140533] __dev_change_flags+0x1cf/0x280
[408508.140987] netif_change_flags+0x26/0x70
[408508.141434] dev_change_flags+0x3d/0xb0
[408508.141878] devinet_ioctl+0x460/0x890
[408508.142321] inet_ioctl+0x18e/0x1d0
[408508.142762] ? _copy_to_user+0x22/0x70
[408508.143207] sock_do_ioctl+0x3d/0xe0
[408508.143652] sock_ioctl+0x10e/0x330
[408508.144091] ? find_held_lock+0x2b/0x80
[408508.144537] __x64_sys_ioctl+0x96/0xe0
[408508.144979] do_syscall_64+0x79/0x3d0
[408508.145415] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[408508.145860] RIP: 0033:0x7f3e0bb4caff |
| In the Linux kernel, the following vulnerability has been resolved:
ublk: fix use-after-free in ublk_partition_scan_work
A race condition exists between the async partition scan work and device
teardown that can lead to a use-after-free of ub->ub_disk:
1. ublk_ctrl_start_dev() schedules partition_scan_work after add_disk()
2. ublk_stop_dev() calls ublk_stop_dev_unlocked() which does:
- del_gendisk(ub->ub_disk)
- ublk_detach_disk() sets ub->ub_disk = NULL
- put_disk() which may free the disk
3. The worker ublk_partition_scan_work() then dereferences ub->ub_disk
leading to UAF
Fix this by using ublk_get_disk()/ublk_put_disk() in the worker to hold
a reference to the disk during the partition scan. The spinlock in
ublk_get_disk() synchronizes with ublk_detach_disk() ensuring the worker
either gets a valid reference or sees NULL and exits early.
Also change flush_work() to cancel_work_sync() to avoid running the
partition scan work unnecessarily when the disk is already detached. |
| In the Linux kernel, the following vulnerability has been resolved:
gpiolib: fix race condition for gdev->srcu
If two drivers were calling gpiochip_add_data_with_key(), one may be
traversing the srcu-protected list in gpio_name_to_desc(), meanwhile
other has just added its gdev in gpiodev_add_to_list_unlocked().
This creates a non-mutexed and non-protected timeframe, when one
instance is dereferencing and using &gdev->srcu, before the other
has initialized it, resulting in crash:
[ 4.935481] Unable to handle kernel paging request at virtual address ffff800272bcc000
[ 4.943396] Mem abort info:
[ 4.943400] ESR = 0x0000000096000005
[ 4.943403] EC = 0x25: DABT (current EL), IL = 32 bits
[ 4.943407] SET = 0, FnV = 0
[ 4.943410] EA = 0, S1PTW = 0
[ 4.943413] FSC = 0x05: level 1 translation fault
[ 4.943416] Data abort info:
[ 4.943418] ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000
[ 4.946220] CM = 0, WnR = 0, TnD = 0, TagAccess = 0
[ 4.955261] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[ 4.955268] swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000038e6c000
[ 4.961449] [ffff800272bcc000] pgd=0000000000000000
[ 4.969203] , p4d=1000000039739003
[ 4.979730] , pud=0000000000000000
[ 4.980210] phandle (CPU): 0x0000005e, phandle (BE): 0x5e000000 for node "reset"
[ 4.991736] Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP
...
[ 5.121359] pc : __srcu_read_lock+0x44/0x98
[ 5.131091] lr : gpio_name_to_desc+0x60/0x1a0
[ 5.153671] sp : ffff8000833bb430
[ 5.298440]
[ 5.298443] Call trace:
[ 5.298445] __srcu_read_lock+0x44/0x98
[ 5.309484] gpio_name_to_desc+0x60/0x1a0
[ 5.320692] gpiochip_add_data_with_key+0x488/0xf00
5.946419] ---[ end trace 0000000000000000 ]---
Move initialization code for gdev fields before it is added to
gpio_devices, with adjacent initialization code.
Adjust goto statements to reflect modified order of operations
[Bartosz: fixed a build issue, removed stray newline] |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: check that server is running in unlock_filesystem
If we are trying to unlock the filesystem via an administrative
interface and nfsd isn't running, it crashes the server. This
happens currently because nfsd4_revoke_states() access state
structures (eg., conf_id_hashtbl) that has been freed as a part
of the server shutdown.
[ 59.465072] Call trace:
[ 59.465308] nfsd4_revoke_states+0x1b4/0x898 [nfsd] (P)
[ 59.465830] write_unlock_fs+0x258/0x440 [nfsd]
[ 59.466278] nfsctl_transaction_write+0xb0/0x120 [nfsd]
[ 59.466780] vfs_write+0x1f0/0x938
[ 59.467088] ksys_write+0xfc/0x1f8
[ 59.467395] __arm64_sys_write+0x74/0xb8
[ 59.467746] invoke_syscall.constprop.0+0xdc/0x1e8
[ 59.468177] do_el0_svc+0x154/0x1d8
[ 59.468489] el0_svc+0x40/0xe0
[ 59.468767] el0t_64_sync_handler+0xa0/0xe8
[ 59.469138] el0t_64_sync+0x1ac/0x1b0
Ensure this can't happen by taking the nfsd_mutex and checking that
the server is still up, and then holding the mutex across the call to
nfsd4_revoke_states(). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vmwgfx: Fix KMS with 3D on HW version 10
HW version 10 does not have GB Surfaces so there is no backing buffer for
surface backed FBs. This would result in a nullptr dereference and crash
the driver causing a black screen. |
| In the Linux kernel, the following vulnerability has been resolved:
arp: do not assume dev_hard_header() does not change skb->head
arp_create() is the only dev_hard_header() caller
making assumption about skb->head being unchanged.
A recent commit broke this assumption.
Initialize @arp pointer after dev_hard_header() call. |
| In the Linux kernel, the following vulnerability has been resolved:
lib/buildid: use __kernel_read() for sleepable context
Prevent a "BUG: unable to handle kernel NULL pointer dereference in
filemap_read_folio".
For the sleepable context, convert freader to use __kernel_read() instead
of direct page cache access via read_cache_folio(). This simplifies the
faultable code path by using the standard kernel file reading interface
which handles all the complexity of reading file data.
At the moment we are not changing the code for non-sleepable context which
uses filemap_get_folio() and only succeeds if the target folios are
already in memory and up-to-date. The reason is to keep the patch simple
and easier to backport to stable kernels.
Syzbot repro does not crash the kernel anymore and the selftests run
successfully.
In the follow up we will make __kernel_read() with IOCB_NOWAIT work for
non-sleepable contexts. In addition, I would like to replace the
secretmem check with a more generic approach and will add fstest for the
buildid code. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv4: ip_gre: make ipgre_header() robust
Analog to commit db5b4e39c4e6 ("ip6_gre: make ip6gre_header() robust")
Over the years, syzbot found many ways to crash the kernel
in ipgre_header() [1].
This involves team or bonding drivers ability to dynamically
change their dev->needed_headroom and/or dev->hard_header_len
In this particular crash mld_newpack() allocated an skb
with a too small reserve/headroom, and by the time mld_sendpack()
was called, syzbot managed to attach an ipgre device.
[1]
skbuff: skb_under_panic: text:ffffffff89ea3cb7 len:2030915468 put:2030915372 head:ffff888058b43000 data:ffff887fdfa6e194 tail:0x120 end:0x6c0 dev:team0
kernel BUG at net/core/skbuff.c:213 !
Oops: invalid opcode: 0000 [#1] SMP KASAN PTI
CPU: 1 UID: 0 PID: 1322 Comm: kworker/1:9 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/25/2025
Workqueue: mld mld_ifc_work
RIP: 0010:skb_panic+0x157/0x160 net/core/skbuff.c:213
Call Trace:
<TASK>
skb_under_panic net/core/skbuff.c:223 [inline]
skb_push+0xc3/0xe0 net/core/skbuff.c:2641
ipgre_header+0x67/0x290 net/ipv4/ip_gre.c:897
dev_hard_header include/linux/netdevice.h:3436 [inline]
neigh_connected_output+0x286/0x460 net/core/neighbour.c:1618
NF_HOOK_COND include/linux/netfilter.h:307 [inline]
ip6_output+0x340/0x550 net/ipv6/ip6_output.c:247
NF_HOOK+0x9e/0x380 include/linux/netfilter.h:318
mld_sendpack+0x8d4/0xe60 net/ipv6/mcast.c:1855
mld_send_cr net/ipv6/mcast.c:2154 [inline]
mld_ifc_work+0x83e/0xd60 net/ipv6/mcast.c:2693
process_one_work kernel/workqueue.c:3257 [inline]
process_scheduled_works+0xad1/0x1770 kernel/workqueue.c:3340
worker_thread+0x8a0/0xda0 kernel/workqueue.c:3421
kthread+0x711/0x8a0 kernel/kthread.c:463
ret_from_fork+0x510/0xa50 arch/x86/kernel/process.c:158
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:246 |
| In the Linux kernel, the following vulnerability has been resolved:
libceph: replace overzealous BUG_ON in osdmap_apply_incremental()
If the osdmap is (maliciously) corrupted such that the incremental
osdmap epoch is different from what is expected, there is no need to
BUG. Instead, just declare the incremental osdmap to be invalid. |
| In the Linux kernel, the following vulnerability has been resolved:
libceph: return the handler error from mon_handle_auth_done()
Currently any error from ceph_auth_handle_reply_done() is propagated
via finish_auth() but isn't returned from mon_handle_auth_done(). This
results in higher layers learning that (despite the monitor considering
us to be successfully authenticated) something went wrong in the
authentication phase and reacting accordingly, but msgr2 still trying
to proceed with establishing the session in the background. In the
case of secure mode this can trigger a WARN in setup_crypto() and later
lead to a NULL pointer dereference inside of prepare_auth_signature(). |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: act_api: avoid dereferencing ERR_PTR in tcf_idrinfo_destroy
syzbot reported a crash in tc_act_in_hw() during netns teardown where
tcf_idrinfo_destroy() passed an ERR_PTR(-EBUSY) value as a tc_action
pointer, leading to an invalid dereference.
Guard against ERR_PTR entries when iterating the action IDR so teardown
does not call tc_act_in_hw() on an error pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Fix crash on profile change rollback failure
mlx5e_netdev_change_profile can fail to attach a new profile and can
fail to rollback to old profile, in such case, we could end up with a
dangling netdev with a fully reset netdev_priv. A retry to change
profile, e.g. another attempt to call mlx5e_netdev_change_profile via
switchdev mode change, will crash trying to access the now NULL
priv->mdev.
This fix allows mlx5e_netdev_change_profile() to handle previous
failures and an empty priv, by not assuming priv is valid.
Pass netdev and mdev to all flows requiring
mlx5e_netdev_change_profile() and avoid passing priv.
In mlx5e_netdev_change_profile() check if current priv is valid, and if
not, just attach the new profile without trying to access the old one.
This fixes the following oops, when enabling switchdev mode for the 2nd
time after first time failure:
## Enabling switchdev mode first time:
mlx5_core 0012:03:00.1: E-Switch: Supported tc chains and prios offload
workqueue: Failed to create a rescuer kthread for wq "mlx5e": -EINTR
mlx5_core 0012:03:00.1: mlx5e_netdev_init_profile:6214:(pid 37199): mlx5e_priv_init failed, err=-12
mlx5_core 0012:03:00.1 gpu3rdma1: mlx5e_netdev_change_profile: new profile init failed, -12
workqueue: Failed to create a rescuer kthread for wq "mlx5e": -EINTR
mlx5_core 0012:03:00.1: mlx5e_netdev_init_profile:6214:(pid 37199): mlx5e_priv_init failed, err=-12
mlx5_core 0012:03:00.1 gpu3rdma1: mlx5e_netdev_change_profile: failed to rollback to orig profile, -12
^^^^^^^^
mlx5_core 0000:00:03.0: E-Switch: Disable: mode(LEGACY), nvfs(0), necvfs(0), active vports(0)
## retry: Enabling switchdev mode 2nd time:
mlx5_core 0000:00:03.0: E-Switch: Supported tc chains and prios offload
BUG: kernel NULL pointer dereference, address: 0000000000000038
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: Oops: 0000 [#1] SMP NOPTI
CPU: 13 UID: 0 PID: 520 Comm: devlink Not tainted 6.18.0-rc4+ #91 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-2.fc40 04/01/2014
RIP: 0010:mlx5e_detach_netdev+0x3c/0x90
Code: 50 00 00 f0 80 4f 78 02 48 8b bf e8 07 00 00 48 85 ff 74 16 48 8b 73 78 48 d1 ee 83 e6 01 83 f6 01 40 0f b6 f6 e8 c4 42 00 00 <48> 8b 45 38 48 85 c0 74 08 48 89 df e8 cc 47 40 1e 48 8b bb f0 07
RSP: 0018:ffffc90000673890 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff8881036a89c0 RCX: 0000000000000000
RDX: ffff888113f63800 RSI: ffffffff822fe720 RDI: 0000000000000000
RBP: 0000000000000000 R08: 0000000000002dcd R09: 0000000000000000
R10: ffffc900006738e8 R11: 00000000ffffffff R12: 0000000000000000
R13: 0000000000000000 R14: ffff8881036a89c0 R15: 0000000000000000
FS: 00007fdfb8384740(0000) GS:ffff88856a9d6000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000038 CR3: 0000000112ae0005 CR4: 0000000000370ef0
Call Trace:
<TASK>
mlx5e_netdev_change_profile+0x45/0xb0
mlx5e_vport_rep_load+0x27b/0x2d0
mlx5_esw_offloads_rep_load+0x72/0xf0
esw_offloads_enable+0x5d0/0x970
mlx5_eswitch_enable_locked+0x349/0x430
? is_mp_supported+0x57/0xb0
mlx5_devlink_eswitch_mode_set+0x26b/0x430
devlink_nl_eswitch_set_doit+0x6f/0xf0
genl_family_rcv_msg_doit+0xe8/0x140
genl_rcv_msg+0x18b/0x290
? __pfx_devlink_nl_pre_doit+0x10/0x10
? __pfx_devlink_nl_eswitch_set_doit+0x10/0x10
? __pfx_devlink_nl_post_doit+0x10/0x10
? __pfx_genl_rcv_msg+0x10/0x10
netlink_rcv_skb+0x52/0x100
genl_rcv+0x28/0x40
netlink_unicast+0x282/0x3e0
? __alloc_skb+0xd6/0x190
netlink_sendmsg+0x1f7/0x430
__sys_sendto+0x213/0x220
? __sys_recvmsg+0x6a/0xd0
__x64_sys_sendto+0x24/0x30
do_syscall_64+0x50/0x1f0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7fdfb8495047 |
| In the Linux kernel, the following vulnerability has been resolved:
net: can: j1939: j1939_xtp_rx_rts_session_active(): deactivate session upon receiving the second rts
Since j1939_session_deactivate_activate_next() in j1939_tp_rxtimer() is
called only when the timer is enabled, we need to call
j1939_session_deactivate_activate_next() if we cancelled the timer.
Otherwise, refcount for j1939_session leaks, which will later appear as
| unregister_netdevice: waiting for vcan0 to become free. Usage count = 2.
problem. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix reference count leak in bpf_prog_test_run_xdp()
syzbot is reporting
unregister_netdevice: waiting for sit0 to become free. Usage count = 2
problem. A debug printk() patch found that a refcount is obtained at
xdp_convert_md_to_buff() from bpf_prog_test_run_xdp().
According to commit ec94670fcb3b ("bpf: Support specifying ingress via
xdp_md context in BPF_PROG_TEST_RUN"), the refcount obtained by
xdp_convert_md_to_buff() will be released by xdp_convert_buff_to_md().
Therefore, we can consider that the error handling path introduced by
commit 1c1949982524 ("bpf: introduce frags support to
bpf_prog_test_run_xdp()") forgot to call xdp_convert_buff_to_md(). |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Don't store mlx5e_priv in mlx5e_dev devlink priv
mlx5e_priv is an unstable structure that can be memset(0) if profile
attaching fails, mlx5e_priv in mlx5e_dev devlink private is used to
reference the netdev and mdev associated with that struct. Instead,
store netdev directly into mlx5e_dev and get mdev from the containing
mlx5_adev aux device structure.
This fixes a kernel oops in mlx5e_remove when switchdev mode fails due
to change profile failure.
$ devlink dev eswitch set pci/0000:00:03.0 mode switchdev
Error: mlx5_core: Failed setting eswitch to offloads.
dmesg:
workqueue: Failed to create a rescuer kthread for wq "mlx5e": -EINTR
mlx5_core 0012:03:00.1: mlx5e_netdev_init_profile:6214:(pid 37199): mlx5e_priv_init failed, err=-12
mlx5_core 0012:03:00.1 gpu3rdma1: mlx5e_netdev_change_profile: new profile init failed, -12
workqueue: Failed to create a rescuer kthread for wq "mlx5e": -EINTR
mlx5_core 0012:03:00.1: mlx5e_netdev_init_profile:6214:(pid 37199): mlx5e_priv_init failed, err=-12
mlx5_core 0012:03:00.1 gpu3rdma1: mlx5e_netdev_change_profile: failed to rollback to orig profile, -12
$ devlink dev reload pci/0000:00:03.0 ==> oops
BUG: kernel NULL pointer dereference, address: 0000000000000520
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: Oops: 0000 [#1] SMP NOPTI
CPU: 3 UID: 0 PID: 521 Comm: devlink Not tainted 6.18.0-rc5+ #117 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-2.fc40 04/01/2014
RIP: 0010:mlx5e_remove+0x68/0x130
RSP: 0018:ffffc900034838f0 EFLAGS: 00010246
RAX: ffff88810283c380 RBX: ffff888101874400 RCX: ffffffff826ffc45
RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000000
RBP: ffff888102d789c0 R08: ffff8881007137f0 R09: ffff888100264e10
R10: ffffc90003483898 R11: ffffc900034838a0 R12: ffff888100d261a0
R13: ffff888100d261a0 R14: ffff8881018749a0 R15: ffff888101874400
FS: 00007f8565fea740(0000) GS:ffff88856a759000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000520 CR3: 000000010b11a004 CR4: 0000000000370ef0
Call Trace:
<TASK>
device_release_driver_internal+0x19c/0x200
bus_remove_device+0xc6/0x130
device_del+0x160/0x3d0
? devl_param_driverinit_value_get+0x2d/0x90
mlx5_detach_device+0x89/0xe0
mlx5_unload_one_devl_locked+0x3a/0x70
mlx5_devlink_reload_down+0xc8/0x220
devlink_reload+0x7d/0x260
devlink_nl_reload_doit+0x45b/0x5a0
genl_family_rcv_msg_doit+0xe8/0x140 |
| In the Linux kernel, the following vulnerability has been resolved:
net: octeon_ep_vf: fix free_irq dev_id mismatch in IRQ rollback
octep_vf_request_irqs() requests MSI-X queue IRQs with dev_id set to
ioq_vector. If request_irq() fails part-way, the rollback loop calls
free_irq() with dev_id set to 'oct', which does not match the original
dev_id and may leave the irqaction registered.
This can keep IRQ handlers alive while ioq_vector is later freed during
unwind/teardown, leading to a use-after-free or crash when an interrupt
fires.
Fix the error path to free IRQs with the same ioq_vector dev_id used
during request_irq(). |
| In the Linux kernel, the following vulnerability has been resolved:
dst: fix races in rt6_uncached_list_del() and rt_del_uncached_list()
syzbot was able to crash the kernel in rt6_uncached_list_flush_dev()
in an interesting way [1]
Crash happens in list_del_init()/INIT_LIST_HEAD() while writing
list->prev, while the prior write on list->next went well.
static inline void INIT_LIST_HEAD(struct list_head *list)
{
WRITE_ONCE(list->next, list); // This went well
WRITE_ONCE(list->prev, list); // Crash, @list has been freed.
}
Issue here is that rt6_uncached_list_del() did not attempt to lock
ul->lock, as list_empty(&rt->dst.rt_uncached) returned
true because the WRITE_ONCE(list->next, list) happened on the other CPU.
We might use list_del_init_careful() and list_empty_careful(),
or make sure rt6_uncached_list_del() always grabs the spinlock
whenever rt->dst.rt_uncached_list has been set.
A similar fix is neeed for IPv4.
[1]
BUG: KASAN: slab-use-after-free in INIT_LIST_HEAD include/linux/list.h:46 [inline]
BUG: KASAN: slab-use-after-free in list_del_init include/linux/list.h:296 [inline]
BUG: KASAN: slab-use-after-free in rt6_uncached_list_flush_dev net/ipv6/route.c:191 [inline]
BUG: KASAN: slab-use-after-free in rt6_disable_ip+0x633/0x730 net/ipv6/route.c:5020
Write of size 8 at addr ffff8880294cfa78 by task kworker/u8:14/3450
CPU: 0 UID: 0 PID: 3450 Comm: kworker/u8:14 Tainted: G L syzkaller #0 PREEMPT_{RT,(full)}
Tainted: [L]=SOFTLOCKUP
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/25/2025
Workqueue: netns cleanup_net
Call Trace:
<TASK>
dump_stack_lvl+0xe8/0x150 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0xca/0x240 mm/kasan/report.c:482
kasan_report+0x118/0x150 mm/kasan/report.c:595
INIT_LIST_HEAD include/linux/list.h:46 [inline]
list_del_init include/linux/list.h:296 [inline]
rt6_uncached_list_flush_dev net/ipv6/route.c:191 [inline]
rt6_disable_ip+0x633/0x730 net/ipv6/route.c:5020
addrconf_ifdown+0x143/0x18a0 net/ipv6/addrconf.c:3853
addrconf_notify+0x1bc/0x1050 net/ipv6/addrconf.c:-1
notifier_call_chain+0x19d/0x3a0 kernel/notifier.c:85
call_netdevice_notifiers_extack net/core/dev.c:2268 [inline]
call_netdevice_notifiers net/core/dev.c:2282 [inline]
netif_close_many+0x29c/0x410 net/core/dev.c:1785
unregister_netdevice_many_notify+0xb50/0x2330 net/core/dev.c:12353
ops_exit_rtnl_list net/core/net_namespace.c:187 [inline]
ops_undo_list+0x3dc/0x990 net/core/net_namespace.c:248
cleanup_net+0x4de/0x7b0 net/core/net_namespace.c:696
process_one_work kernel/workqueue.c:3257 [inline]
process_scheduled_works+0xad1/0x1770 kernel/workqueue.c:3340
worker_thread+0x8a0/0xda0 kernel/workqueue.c:3421
kthread+0x711/0x8a0 kernel/kthread.c:463
ret_from_fork+0x510/0xa50 arch/x86/kernel/process.c:158
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:246
</TASK>
Allocated by task 803:
kasan_save_stack mm/kasan/common.c:57 [inline]
kasan_save_track+0x3e/0x80 mm/kasan/common.c:78
unpoison_slab_object mm/kasan/common.c:340 [inline]
__kasan_slab_alloc+0x6c/0x80 mm/kasan/common.c:366
kasan_slab_alloc include/linux/kasan.h:253 [inline]
slab_post_alloc_hook mm/slub.c:4953 [inline]
slab_alloc_node mm/slub.c:5263 [inline]
kmem_cache_alloc_noprof+0x18d/0x6c0 mm/slub.c:5270
dst_alloc+0x105/0x170 net/core/dst.c:89
ip6_dst_alloc net/ipv6/route.c:342 [inline]
icmp6_dst_alloc+0x75/0x460 net/ipv6/route.c:3333
mld_sendpack+0x683/0xe60 net/ipv6/mcast.c:1844
mld_send_cr net/ipv6/mcast.c:2154 [inline]
mld_ifc_work+0x83e/0xd60 net/ipv6/mcast.c:2693
process_one_work kernel/workqueue.c:3257 [inline]
process_scheduled_works+0xad1/0x1770 kernel/workqueue.c:3340
worker_thread+0x8a0/0xda0 kernel/workqueue.c:3421
kthread+0x711/0x8a0 kernel/kthread.c:463
ret_from_fork+0x510/0xa50 arch/x86/kernel/process.c:158
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entr
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
ip6_tunnel: use skb_vlan_inet_prepare() in __ip6_tnl_rcv()
Blamed commit did not take care of VLAN encapsulations
as spotted by syzbot [1].
Use skb_vlan_inet_prepare() instead of pskb_inet_may_pull().
[1]
BUG: KMSAN: uninit-value in __INET_ECN_decapsulate include/net/inet_ecn.h:253 [inline]
BUG: KMSAN: uninit-value in INET_ECN_decapsulate include/net/inet_ecn.h:275 [inline]
BUG: KMSAN: uninit-value in IP6_ECN_decapsulate+0x7a8/0x1fa0 include/net/inet_ecn.h:321
__INET_ECN_decapsulate include/net/inet_ecn.h:253 [inline]
INET_ECN_decapsulate include/net/inet_ecn.h:275 [inline]
IP6_ECN_decapsulate+0x7a8/0x1fa0 include/net/inet_ecn.h:321
ip6ip6_dscp_ecn_decapsulate+0x16f/0x1b0 net/ipv6/ip6_tunnel.c:729
__ip6_tnl_rcv+0xed9/0x1b50 net/ipv6/ip6_tunnel.c:860
ip6_tnl_rcv+0xc3/0x100 net/ipv6/ip6_tunnel.c:903
gre_rcv+0x1529/0x1b90 net/ipv6/ip6_gre.c:-1
ip6_protocol_deliver_rcu+0x1c89/0x2c60 net/ipv6/ip6_input.c:438
ip6_input_finish+0x1f4/0x4a0 net/ipv6/ip6_input.c:489
NF_HOOK include/linux/netfilter.h:318 [inline]
ip6_input+0x9c/0x330 net/ipv6/ip6_input.c:500
ip6_mc_input+0x7ca/0xc10 net/ipv6/ip6_input.c:590
dst_input include/net/dst.h:474 [inline]
ip6_rcv_finish+0x958/0x990 net/ipv6/ip6_input.c:79
NF_HOOK include/linux/netfilter.h:318 [inline]
ipv6_rcv+0xf1/0x3c0 net/ipv6/ip6_input.c:311
__netif_receive_skb_one_core net/core/dev.c:6139 [inline]
__netif_receive_skb+0x1df/0xac0 net/core/dev.c:6252
netif_receive_skb_internal net/core/dev.c:6338 [inline]
netif_receive_skb+0x57/0x630 net/core/dev.c:6397
tun_rx_batched+0x1df/0x980 drivers/net/tun.c:1485
tun_get_user+0x5c0e/0x6c60 drivers/net/tun.c:1953
tun_chr_write_iter+0x3e9/0x5c0 drivers/net/tun.c:1999
new_sync_write fs/read_write.c:593 [inline]
vfs_write+0xbe2/0x15d0 fs/read_write.c:686
ksys_write fs/read_write.c:738 [inline]
__do_sys_write fs/read_write.c:749 [inline]
__se_sys_write fs/read_write.c:746 [inline]
__x64_sys_write+0x1fb/0x4d0 fs/read_write.c:746
x64_sys_call+0x30ab/0x3e70 arch/x86/include/generated/asm/syscalls_64.h:2
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xd3/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Uninit was created at:
slab_post_alloc_hook mm/slub.c:4960 [inline]
slab_alloc_node mm/slub.c:5263 [inline]
kmem_cache_alloc_node_noprof+0x9e7/0x17a0 mm/slub.c:5315
kmalloc_reserve+0x13c/0x4b0 net/core/skbuff.c:586
__alloc_skb+0x805/0x1040 net/core/skbuff.c:690
alloc_skb include/linux/skbuff.h:1383 [inline]
alloc_skb_with_frags+0xc5/0xa60 net/core/skbuff.c:6712
sock_alloc_send_pskb+0xacc/0xc60 net/core/sock.c:2995
tun_alloc_skb drivers/net/tun.c:1461 [inline]
tun_get_user+0x1142/0x6c60 drivers/net/tun.c:1794
tun_chr_write_iter+0x3e9/0x5c0 drivers/net/tun.c:1999
new_sync_write fs/read_write.c:593 [inline]
vfs_write+0xbe2/0x15d0 fs/read_write.c:686
ksys_write fs/read_write.c:738 [inline]
__do_sys_write fs/read_write.c:749 [inline]
__se_sys_write fs/read_write.c:746 [inline]
__x64_sys_write+0x1fb/0x4d0 fs/read_write.c:746
x64_sys_call+0x30ab/0x3e70 arch/x86/include/generated/asm/syscalls_64.h:2
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xd3/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
CPU: 0 UID: 0 PID: 6465 Comm: syz.0.17 Not tainted syzkaller #0 PREEMPT(none)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/25/2025 |
