| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In TLSX_EchChangeSNI, the ctx->extensions branch set extensions unconditionally even when TLSX_Find returned NULL. This caused TLSX_UseSNI to attach the attacker-controlled publicName to the shared WOLFSSL_CTX when no inner SNI was configured. TLSX_EchRestoreSNI then failed to clean it up because its removal was gated on serverNameX != NULL. The inner ClientHello was sized before the pollution but written after it, causing TLSX_SNI_Write to memcpy 255 bytes past the allocation boundary. |
| Insertion of Sensitive Information into Log File vulnerability in the cloud membership for clustering component of Apache Tomcat exposed the Kubernetes bearer token.
This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.20, from 10.1.0-M1 through 10.1.53, from 9.0.13 through 9.0.116.
Users are recommended to upgrade to version 11.0.21, 10.1.54 or 9.0.117, which fix the issue. |
| OpenClaw before 2026.3.22 performs cryptographic and dispatch operations on inbound Nostr direct messages before enforcing sender and pairing policy validation. Attackers can trigger unauthorized pre-authentication computation by sending crafted DM messages, enabling denial of service through resource exhaustion. |
| OpenClaw before 2026.3.23 contains an authentication bypass vulnerability in the Canvas gateway where authorizeCanvasRequest() unconditionally allows local-direct requests without validating bearer tokens or canvas capabilities. Attackers can send unauthenticated loopback HTTP and WebSocket requests to Canvas routes to bypass authentication and gain unauthorized access. |
| The Aruba HiSpeed Cache plugin for WordPress is vulnerable to Cross-Site Request Forgery in all versions up to, and including, 3.0.4. This is due to missing nonce verification on the `ahsc_ajax_reset_options()` function. This makes it possible for unauthenticated attackers to reset all plugin settings to their default values via a forged request granted they can trick a site administrator into performing an action such as clicking on a link. |
| An Incorrect Synchronization vulnerability in the management daemon (mgd) of Juniper Networks Junos OS and Junos OS Evolved allows a network-based attacker with low privileges to cause a complete Denial-of-Service (DoS) of the management plane.
When NETCONF sessions are quickly established and disconnected, a locking issue causes mgd processes to hang in an unusable state. When the maximum number of mgd processes has been reached, no new logins are possible. This leads to the inability to manage the device and requires a power-cycle to recover.
This issue can be monitored by checking for mgd processes in lockf state in the output of 'show system processes extensive':
user@host> show system processes extensive | match mgd
<pid> root 20 0 501M 4640K lockf 1 0:01 0.00% mgd
If the system still can be accessed (either via the CLI or as root, which might still be possible as last resort as this won't invoke mgd), mgd processes in this state can be killed with 'request system process terminate <PID>' from the CLI or with 'kill -9 <PID>' from the shell.
This issue affects:
Junos OS:
* 23.4 versions before 23.4R2-S4,
* 24.2 versions before 24.2R2-S1,
* 24.4 versions before 24.4R1-S3, 24.4R2;
This issue does not affect Junos OS versions before 23.4R1;
Junos OS Evolved:
* 23.4 versions before 23.4R2-S5-EVO,
* 24.2 versions before 24.2R2-S1-EVO,
* 24.4 versions before 24.4R1-S3-EVO, 24.4R2-EVO.
This issue does not affect Junos OS Evolved versions before 23.4R1-EVO; |
| An Improper Check for Unusual or Exceptional Conditions vulnerability in the flow daemon (flowd) of Juniper Networks Junos OS on SRX Series allows an attacker sending a specific, malformed ICMPv6 packet to cause the srxpfe process to crash and restart. Continued receipt and processing of these packets will repeatedly crash the srxpfe process and sustain the Denial of Service (DoS) condition.
During NAT64 translation, receipt of a specific, malformed ICMPv6 packet destined to the device will cause the srxpfe process to crash and restart.
This issue cannot be triggered using IPv4 nor other IPv6 traffic.
This issue affects Junos OS on SRX Series:
* all versions before 21.2R3-S10,
* all versions of 21.3,
* from 21.4 before 21.4R3-S12,
* all versions of 22.1,
* from 22.2 before 22.2R3-S8,
* all versions of 22.4,
* from 22.4 before 22.4R3-S9,
* from 23.2 before 23.2R2-S6,
* from 23.4 before 23.4R2-S7,
* from 24.2 before 24.2R2-S3,
* from 24.4 before 24.4R2-S3,
* from 25.2 before 25.2R1-S2, 25.2R2. |
| OpenClaw before 2026.3.25 contains an improper access control vulnerability in the HTTP /sessions/:sessionKey/kill route that allows any bearer-authenticated user to invoke admin-level session termination functions without proper scope validation. Attackers can exploit this by sending authenticated requests to kill arbitrary subagent sessions via the killSubagentRunAdmin function, bypassing ownership and operator scope restrictions. |
| Wasmtime is a runtime for WebAssembly. Prior to 24.0.7, 36.0.7, 42.0.2, and 43.0.1, Wasmtime contains a vulnerability where when transcoding a UTF-16 string to the latin1+utf16 component-model encoding it would incorrectly validate the byte length of the input string when performing a bounds check. Specifically the number of code units were checked instead of the byte length, which is twice the size of the code units. This vulnerability can cause the host to read beyond the end of a WebAssembly's linear memory in an attempt to transcode nonexistent bytes. In Wasmtime's default configuration this will read unmapped memory on a guard page, terminating the process with a segfault. Wasmtime can be configured, however, without guard pages which would mean that host memory beyond the end of linear memory may be read and interpreted as UTF-16. A host segfault is a denial-of-service vulnerability in Wasmtime, and possibly being able to read beyond the end of linear memory is additionally a vulnerability. Note that reading beyond the end of linear memory requires nonstandard configuration of Wasmtime, specifically with guard pages disabled. This vulnerability is fixed in 24.0.7, 36.0.7, 42.0.2, and 43.0.1. |
| Wasmtime is a runtime for WebAssembly. Prior to 24.0.7, 36.0.7, 42.0.2, and 43.0.1, On x86-64 platforms with SSE3 disabled Wasmtime's compilation of the f64x2.splat WebAssembly instruction with Cranelift may load 8 more bytes than is necessary. When signals-based-traps are disabled this can result in a uncaught segfault due to loading from unmapped guard pages. With guard pages disabled it's possible for out-of-sandbox data to be loaded, but this data is not visible to WebAssembly guests. This vulnerability is fixed in 24.0.7, 36.0.7, 42.0.2, and 43.0.1. |
| Wasmtime is a runtime for WebAssembly. From 25.0.0 to before 36.0.7, 42.0.2, and 43.0.1, Wasmtime with its Winch (baseline) non-default compiler backend may allow properly constructed guest Wasm to access host memory outside of its linear-memory sandbox. This vulnerability requires use of the Winch compiler (-Ccompiler=winch). By default, Wasmtime uses its Cranelift backend, not Winch. With Winch, the same incorrect assumption is present in theory on both aarch64 and x86-64. The aarch64 case has an observed-working proof of concept, while the x86-64 case is theoretical and may not be reachable in practice. This Winch compiler bug can allow the Wasm guest to access memory before or after the linear-memory region, independently of whether pre- or post-guard regions are configured. The accessible range in the initial bug proof-of-concept is up to 32KiB before the start of memory, or ~4GiB after the start of memory, independently of the size of pre- or post-guard regions or the use of explicit or guard-region-based bounds checking. However, the underlying bug assumes a 32-bit memory offset stored in a 64-bit register has its upper bits cleared when it may not, and so closely related variants of the initial proof-of-concept may be able to access truly arbitrary memory in-process. This could result in a host process segmentation fault (DoS), an arbitrary data leak from the host process, or with a write, potentially an arbitrary RCE. This vulnerability is fixed in 36.0.7, 42.0.2, and 43.0.1. |
| OpenClaw before 2026.3.25 contains a privilege escalation vulnerability where silent local shared-auth reconnects auto-approve scope-upgrade requests, widening paired device permissions from operator.read to operator.admin. Attackers can exploit this by triggering local reconnection to silently escalate privileges and achieve remote code execution on the node. |
| PraisonAI is a multi-agent teams system. Prior to 4.5.128, the /media-stream WebSocket endpoint in PraisonAI's call module accepts connections from any client without authentication or Twilio signature validation. Each connection opens an authenticated session to OpenAI's Realtime API using the server's API key. There are no limits on concurrent connections, message rate, or message size, allowing an unauthenticated attacker to exhaust server resources and drain the victim's OpenAI API credits. This vulnerability is fixed in 4.5.128. |
| Heap buffer overflow in DTLS 1.3 ACK message processing. A remote attacker can send a crafted DTLS 1.3 ACK message that triggers a heap buffer overflow. |
| When restoring a session from cache, a pointer from the serialized session data is used in a free operation without validation. An attacker who can poison the session cache could trigger an arbitrary free. Exploitation requires the ability to inject a crafted session into the cache and for the application to call specific session restore APIs. |
| A Missing Authorization vulnerability in the CLI of Juniper Networks Junos OS and Junos OS Evolved allows a local user with low privileges to read sensitive information.
A local user with low privileges can execute the CLI command 'show mgd' with specific arguments which will expose sensitive information.
This issue affects
Junos OS:
* all versions before 22.4R3-S8,
* 23.2 versions before 23.2R2-S6,
* 23.4 versions before 23.4R2-S6,
* 24.2 versions before 24.2R2-S4,
* 24.4 versions before 24.4R2-S1,
* 25.2 version before 25.2R1-S2, 25.2R2;
Junos OS Evolved:
* all versions before 23.2R2-S6-EVO,
* 23.4 version before 23.4R2-S6-EVO,
* 24.2 version before 24.2R2-S4-EVO,
* 24.4 versions before 24.4R2-S1-EVO,
* 25.2 versions before 25.2R2-EVO. |
| X.509 date buffer overflow in wolfSSL_X509_notAfter / wolfSSL_X509_notBefore. A buffer overflow may occur when parsing date fields from a crafted X.509 certificate via the compatibility layer API. This is only triggered when calling these two APIs directly from an application, and does not affect TLS or certificate verify operations in wolfSSL. |
| A heap use-after-free exists in wolfSSL's TLS 1.3 post-quantum cryptography (PQC) hybrid KeyShare processing. In the error handling path of TLSX_KeyShare_ProcessPqcHybridClient() in src/tls.c, the inner function TLSX_KeyShare_ProcessPqcClient_ex() frees a KyberKey object upon encountering an error. The caller then invokes TLSX_KeyShare_FreeAll(), which attempts to call ForceZero() on the already-freed KyberKey, resulting in writes of zero bytes over freed heap memory. |
| CLIENT_CERT authentication does not fail as expected for some scenarios when soft fail is disabled and FFM is used in Apache Tomcat.
This issue affects Apache Tomcat: from 11.0.0-M14 through 11.0.20, from 10.1.22 through 10.1.53, from 9.0.92 through 9.0.116.
Users are recommended to upgrade to version 11.0.21, 10.1.54 or 9.0.117, which fixes the issue. |
| The Perfmatters plugin for WordPress is vulnerable to arbitrary file overwrite via path traversal in all versions up to, and including, 2.5.9. This is due to the `PMCS::action_handler()` method processing the bulk action `activate`/`deactivate` handlers without any authorization check or nonce verification. The `$_GET['snippets'][]` values are passed unsanitized to `Snippet::activate()`/`Snippet::deactivate()` which call `Snippet::update()` then `file_put_contents()` with the traversed path. This makes it possible for authenticated attackers, with Subscriber-level access and above, to overwrite arbitrary files on the server with a fixed PHP docblock content, potentially causing denial of service by corrupting critical files like `.htaccess` or `index.php`. |
