| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: fix inverted genmask check in nft_map_catchall_activate()
nft_map_catchall_activate() has an inverted element activity check
compared to its non-catchall counterpart nft_mapelem_activate() and
compared to what is logically required.
nft_map_catchall_activate() is called from the abort path to re-activate
catchall map elements that were deactivated during a failed transaction.
It should skip elements that are already active (they don't need
re-activation) and process elements that are inactive (they need to be
restored). Instead, the current code does the opposite: it skips inactive
elements and processes active ones.
Compare the non-catchall activate callback, which is correct:
nft_mapelem_activate():
if (nft_set_elem_active(ext, iter->genmask))
return 0; /* skip active, process inactive */
With the buggy catchall version:
nft_map_catchall_activate():
if (!nft_set_elem_active(ext, genmask))
continue; /* skip inactive, process active */
The consequence is that when a DELSET operation is aborted,
nft_setelem_data_activate() is never called for the catchall element.
For NFT_GOTO verdict elements, this means nft_data_hold() is never
called to restore the chain->use reference count. Each abort cycle
permanently decrements chain->use. Once chain->use reaches zero,
DELCHAIN succeeds and frees the chain while catchall verdict elements
still reference it, resulting in a use-after-free.
This is exploitable for local privilege escalation from an unprivileged
user via user namespaces + nftables on distributions that enable
CONFIG_USER_NS and CONFIG_NF_TABLES.
Fix by removing the negation so the check matches nft_mapelem_activate():
skip active elements, process inactive ones. |
| In the Linux kernel, the following vulnerability has been resolved:
ipvlan: Make the addrs_lock be per port
Make the addrs_lock be per port, not per ipvlan dev.
Initial code seems to be written in the assumption,
that any address change must occur under RTNL.
But it is not so for the case of IPv6. So
1) Introduce per-port addrs_lock.
2) It was needed to fix places where it was forgotten
to take lock (ipvlan_open/ipvlan_close)
This appears to be a very minor problem though.
Since it's highly unlikely that ipvlan_add_addr() will
be called on 2 CPU simultaneously. But nevertheless,
this could cause:
1) False-negative of ipvlan_addr_busy(): one interface
iterated through all port->ipvlans + ipvlan->addrs
under some ipvlan spinlock, and another added IP
under its own lock. Though this is only possible
for IPv6, since looks like only ipvlan_addr6_event() can be
called without rtnl_lock.
2) Race since ipvlan_ht_addr_add(port) is called under
different ipvlan->addrs_lock locks
This should not affect performance, since add/remove IP
is a rare situation and spinlock is not taken on fast
paths. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix recvmsg() unconditional requeue
If rxrpc_recvmsg() fails because MSG_DONTWAIT was specified but the call at
the front of the recvmsg queue already has its mutex locked, it requeues
the call - whether or not the call is already queued. The call may be on
the queue because MSG_PEEK was also passed and so the call was not dequeued
or because the I/O thread requeued it.
The unconditional requeue may then corrupt the recvmsg queue, leading to
things like UAFs or refcount underruns.
Fix this by only requeuing the call if it isn't already on the queue - and
moving it to the front if it is already queued. If we don't queue it, we
have to put the ref we obtained by dequeuing it.
Also, MSG_PEEK doesn't dequeue the call so shouldn't call
rxrpc_notify_socket() for the call if we didn't use up all the data on the
queue, so fix that also. |
| SPIP 4.4.10 through 4.4.12 before 4.4.13 allows unintended privilege assignment (of administrator privileges) during the editing of an author data structure because of STATUT mishandling. |
| `yaml` is a YAML parser and serialiser for JavaScript. Parsing a YAML document with a version of `yaml` on the 1.x branch prior to 1.10.3 or on the 2.x branch prior to 2.8.3 may throw a RangeError due to a stack overflow. The node resolution/composition phase uses recursive function calls without a depth bound. An attacker who can supply YAML for parsing can trigger a `RangeError: Maximum call stack size exceeded` with a small payload (~2–10 KB). The `RangeError` is not a `YAMLParseError`, so applications that only catch YAML-specific errors will encounter an unexpected exception type. Depending on the host application's exception handling, this can fail requests or terminate the Node.js process. Flow sequences allow deep nesting with minimal bytes (2 bytes per level: one `[` and one `]`). On the default Node.js stack, approximately 1,000–5,000 levels of nesting (2–10 KB input) exhaust the call stack. The exact threshold is environment-dependent (Node.js version, stack size, call stack depth at invocation). Note: the library's `Parser` (CST phase) uses a stack-based iterative approach and is not affected. Only the compose/resolve phase uses actual call-stack recursion. All three public parsing APIs are affected: `YAML.parse()`, `YAML.parseDocument()`, and `YAML.parseAllDocuments()`. Versions 1.10.3 and 2.8.3 contain a patch. |
| A user with access to the cluster with a limited set of privilege actions can trigger a crash of a mongod process during the limited and unpredictable window when the cluster is being promoted from a replica set to a sharded cluster. This may cause a denial of service by taking down the primary of the replica set.
This issue affects MongoDB Server v8.2 versions prior to 8.2.2, MongoDB Server v8.0 versions between 8.0.18, MongoDB Server v7.0 versions between 7.0.31. |
| A Business Logic vulnerability exists in SourceCodester Loan Management System v1.0 due to improper server-side validation. The application allows administrators to create "Loan Plans" with specific interest rates. While the frontend interface prevents users from entering negative numbers, this constraint is not enforced on the backend. An authenticated attacker can bypass the client-side restriction by manipulating the HTTP POST request to submit a negative value for the interest_percentage. This results in the creation of loan plans with negative interest rates. |
| Parse Server is an open source backend that can be deployed to any infrastructure that can run Node.js. Prior to versions 8.6.69 and 9.7.0-alpha.14, an authenticated user can bypass the immutability guard on session fields (expiresAt, createdWith) by sending a null value in a PUT request to the session update endpoint. This allows nullifying the session expiry, making the session valid indefinitely and bypassing configured session length policies. This issue has been patched in versions 8.6.69 and 9.7.0-alpha.14. |
| Dell AppSync, version(s) 4.6.0, contain(s) an UNIX Symbolic Link (Symlink) Following vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Information tampering. |
| libp2p-rust is the official rust language Implementation of the libp2p networking stack. Prior to version 0.49.4, the Rust libp2p Gossipsub implementation contains a remotely reachable panic in backoff expiry handling. After a peer sends a crafted PRUNE control message with an attacker-controlled, near-maximum backoff value, the value is accepted and stored as an Instant near the representable upper bound. On a later heartbeat, the implementation performs unchecked Instant + Duration arithmetic (backoff_time + slack), which can overflow and panic with: overflow when adding duration to instant. This issue is reachable from any Gossipsub peer over normal TCP + Noise + mplex/yamux connectivity and requires no further authentication beyond becoming a protocol peer. This issue has been patched in version 0.49.4. |
| The application does not detect or guard against cyclic PDF object references while handling JavaScript in PDF. When pages and annotations are crafted that reference each other in a loop, passing the document to APIs (e.g., SOAP) that perform deep traversal can cause uncontrolled recursion, stack exhaustion, and application crashes. |
| A flaw was found in Spacewalk, as used in Red Hat Network Satellite. This open redirect vulnerability allows remote attackers to redirect users to arbitrary web sites by manipulating a URL in the url_bounce parameter. This can enable attackers to conduct phishing attacks, potentially leading to unauthorized information disclosure or credential theft. |
| The function _ux_host_class_storage_media_mount() is responsible for mounting partitions on a USB mass storage device. When it encounters an extended partition entry in the partition table, it recursively calls itself to mount the next logical partition.
This recursion occurs in _ux_host_class_storage_partition_read(), which parses up to four partition entries. If an extended partition is found (with type UX_HOST_CLASS_STORAGE_PARTITION_EXTENDED or EXTENDED_LBA_MAPPED), the code invokes:
_ux_host_class_storage_media_mount(storage, sector + _ux_utility_long_get(...));
There is no limit on the recursion depth or tracking of visited sectors. As a result, a malicious or malformed disk image can include cyclic or excessively deep chains of extended partitions, causing the function to recurse until stack overflow occurs. |
| In JetBrains Datalore before 2026.1 session hijacking was possible due to missing secure attribute for cookie settings |
| MCP Ruby SDK is the official Ruby SDK for Model Context Protocol servers and clients. Prior to version 0.9.2, the Ruby SDK's streamable_http_transport.rb implementation contains a session hijacking vulnerability. An attacker who obtains a valid session ID can completely hijack the victim's Server-Sent Events (SSE) stream and intercept all real-time data. Version 0.9.2 contains a patch. |
| Improper Restriction of XML External Entity Reference vulnerability in RTI Connext Professional (Routing Service,Observability Collector,Recording Service,Queueing Service,Cloud Discovery Service) allows Serialized Data External Linking, Data Serializat... |
| Insufficient policy enforcement in WebUSB in Google Chrome prior to 146.0.7680.178 allowed a remote attacker to obtain potentially sensitive information from process memory via a crafted HTML page. (Chromium security severity: High) |
| A local file inclusion vulnerability in the upload/download flow of the VertiGIS FM application allows authenticated attackers to read arbitrary files from the server by manipulating a file's path during its upload. When the file is subsequently downloaded, the file in the attacker controlled path is returned. Due to the application's ASP.NET architecture, this could potentially lead to remote code execution when the "web.config" file is obtained. Furthermore, the application resolves UNC paths which may enable NTLM-relaying attacks.
This issue affects VertiGIS FM: 10.5.00119 (0d29d428). |
| XML Notepad is a Windows program that provides a simple intuitive User Interface for browsing and editing XML documents. Prior to version 2.9.0.21, XML Notepad does not disable DTD processing by default which means external entities are resolved automatically. There is a well known attack related to malicious DTD files where an attacker to craft a malicious XML file that loads a DTD that causes XML Notepad to make outbound HTTP/SMB requests, potentially leaking local file contents or capturing the victim's NTLM credentials. This issue has been patched in version 2.9.0.21. |
| FreeScout is a free help desk and shared inbox built with PHP's Laravel framework. Prior to version 1.8.211, host header manipulation in FreeScout version (http://localhost:8080/system/status) allows an attacker to inject an arbitrary domain into generated absolute URLs. This leads to External Resource Loading and Open Redirect behavior. When the application constructs links and assets using the unvalidated Host header, user requests can be redirected to attacker-controlled domains and external resources may be loaded from malicious servers. This issue has been patched in version 1.8.211. |
