| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: ctnetlink: use netlink policy range checks
Replace manual range and mask validations with netlink policy
annotations in ctnetlink code paths, so that the netlink core rejects
invalid values early and can generate extack errors.
- CTA_PROTOINFO_TCP_STATE: reject values > TCP_CONNTRACK_SYN_SENT2 at
policy level, removing the manual >= TCP_CONNTRACK_MAX check.
- CTA_PROTOINFO_TCP_WSCALE_ORIGINAL/REPLY: reject values > TCP_MAX_WSCALE
(14). The normal TCP option parsing path already clamps to this value,
but the ctnetlink path accepted 0-255, causing undefined behavior when
used as a u32 shift count.
- CTA_FILTER_ORIG_FLAGS/REPLY_FLAGS: use NLA_POLICY_MASK with
CTA_FILTER_F_ALL, removing the manual mask checks.
- CTA_EXPECT_FLAGS: use NLA_POLICY_MASK with NF_CT_EXPECT_MASK, adding
a new mask define grouping all valid expect flags.
Extracted from a broader nf-next patch by Florian Westphal, scoped to
ctnetlink for the fixes tree. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: Fix ERTM re-init and zero pdu_len infinite loop
l2cap_config_req() processes CONFIG_REQ for channels in BT_CONNECTED
state to support L2CAP reconfiguration (e.g. MTU changes). However,
since both CONF_INPUT_DONE and CONF_OUTPUT_DONE are already set from
the initial configuration, the reconfiguration path falls through to
l2cap_ertm_init(), which re-initializes tx_q, srej_q, srej_list, and
retrans_list without freeing the previous allocations and sets
chan->sdu to NULL without freeing the existing skb. This leaks all
previously allocated ERTM resources.
Additionally, l2cap_parse_conf_req() does not validate the minimum
value of remote_mps derived from the RFC max_pdu_size option. A zero
value propagates to l2cap_segment_sdu() where pdu_len becomes zero,
causing the while loop to never terminate since len is never
decremented, exhausting all available memory.
Fix the double-init by skipping l2cap_ertm_init() and
l2cap_chan_ready() when the channel is already in BT_CONNECTED state,
while still allowing the reconfiguration parameters to be updated
through l2cap_parse_conf_req(). Also add a pdu_len zero check in
l2cap_segment_sdu() as a safeguard. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix undefined behavior in interpreter sdiv/smod for INT_MIN
The BPF interpreter's signed 32-bit division and modulo handlers use
the kernel abs() macro on s32 operands. The abs() macro documentation
(include/linux/math.h) explicitly states the result is undefined when
the input is the type minimum. When DST contains S32_MIN (0x80000000),
abs((s32)DST) triggers undefined behavior and returns S32_MIN unchanged
on arm64/x86. This value is then sign-extended to u64 as
0xFFFFFFFF80000000, causing do_div() to compute the wrong result.
The verifier's abstract interpretation (scalar32_min_max_sdiv) computes
the mathematically correct result for range tracking, creating a
verifier/interpreter mismatch that can be exploited for out-of-bounds
map value access.
Introduce abs_s32() which handles S32_MIN correctly by casting to u32
before negating, avoiding signed overflow entirely. Replace all 8
abs((s32)...) call sites in the interpreter's sdiv32/smod32 handlers.
s32 is the only affected case -- the s64 division/modulo handlers do
not use abs(). |
| SocialEngine versions 7.8.0 and prior contain a SQL injection vulnerability in the /activity/index/get-memberall endpoint where user-supplied input passed via the text parameter is not sanitized before being incorporated into a SQL query. An unauthenticated remote attacker can exploit this vulnerability to read arbitrary data from the database, reset administrator account passwords, and gain unauthorized access to the Packages Manager in the Admin Panel, potentially enabling remote code execution. |
| Froxlor is open source server administration software. Prior to version 2.3.6, in `EmailSender::add()`, the domain ownership validation for full email sender aliases uses the wrong array index when splitting the email address, passing the local part instead of the domain to `validateLocalDomainOwnership()`. This causes the ownership check to always pass for non-existent "domains," allowing any authenticated customer to add sender aliases for email addresses on domains belonging to other customers. Postfix's `sender_login_maps` then authorizes the attacker to send emails as those addresses. Version 2.3.6 fixes the issue. |
| Froxlor is open source server administration software. Prior to version 2.3.6, the Froxlor API endpoint `Customers.update` (and `Admins.update`) does not validate the `def_language` parameter against the list of available language files. An authenticated customer can set `def_language` to a path traversal payload (e.g., `../../../../../var/customers/webs/customer1/evil`), which is stored in the database. On subsequent requests, `Language::loadLanguage()` constructs a file path using this value and executes it via `require`, achieving arbitrary PHP code execution as the web server user. Version 2.3.6 fixes the issue. |
| Paperclip is a Node.js server and React UI that orchestrates a team of AI agents to run a business. Versions of @paperclipai/server prior to 2026.416.0 contain a privilege escalation vulnerability that allows an attacker with an Agent API key to execute arbitrary OS commands on the Paperclip server host. An attacker with an agent credential can escalate privileges from the agent runtime to the Paperclip server host. The vulnerability occurs because agents are allowed to update their own adapterConfig via the /agents/:id API endpoint. The configuration field adapterConfig.workspaceStrategy.provisionCommand is later executed by the server runtime. As a result, an attacker controlling an agent credential can inject arbitrary shell commands which are executed by the Paperclip server during workspace provisioning. This breaks the intended trust boundary between agent runtime configuration and server host execution, allowing a compromised or malicious agent to escalate privileges and run commands on the host system. This vulnerability allows remote code execution on the server host. @paperclipai/server version 2026.416.0 fixes the issue. |
| Rclone is a command-line program to sync files and directories to and from different cloud storage providers. The RC endpoint `options/set` is exposed without `AuthRequired: true`, but it can mutate global runtime configuration, including the RC option block itself. Starting in version 1.45.0 and prior to version 1.73.5, an unauthenticated attacker can set `rc.NoAuth=true`, which disables the authorization gate for many RC methods registered with `AuthRequired: true` on reachable RC servers that are started without global HTTP authentication. This can lead to unauthorized access to sensitive administrative functionality, including configuration and operational RC methods. Version 1.73.5 patches the issue. |
| Squidex is an open source headless content management system and content management hub. Prior to version 7.23.0, the `RestoreController.PostRestoreJob` endpoint allows an administrator to supply an arbitrary URL for downloading backup archives. This URL is fetched using the "Backup" `HttpClient` without any SSRF protection. A malicious or compromised admin can use this endpoint to probe internal network services, access cloud metadata endpoints, or perform internal reconnaissance. The vulnerability is authenticated (Admin-only) but highly impactful, allowing potential access to sensitive internal resources. Version 7.23.0 contains a fix. |
| A flaw was found in util-linux. Improper hostname canonicalization in the `login(1)` utility, when invoked with the `-h` option, can modify the supplied remote hostname before setting `PAM_RHOST`. A remote attacker could exploit this by providing a specially crafted hostname, potentially bypassing host-based Pluggable Authentication Modules (PAM) access control rules that rely on fully qualified domain names. This could lead to unauthorized access. |
| Unisys WebPerfect Image Suite versions 3.0.3960.22810 and 3.0.3960.22604 expose an unauthenticated WCF SOAP endpoint on TCP port 1208 that accepts unsanitized file paths in the ReadLicense action's LFName parameter, allowing remote attackers to trigger SMB connections and leak NTLMv2 machine-account hashes. Attackers can submit crafted SOAP requests with UNC paths to force the server to initiate outbound SMB connections, exposing authentication credentials that may be relayed for privilege escalation or lateral movement within the network. |
| Unisys WebPerfect Image Suite versions 3.0.3960.22810 and 3.0.3960.22604 expose a deprecated .NET Remoting TCP channel that allows remote unauthenticated attackers to leak NTLMv2 machine-account hashes by supplying a Windows UNC path as a target file argument through object-unmarshalling techniques. Attackers can capture the leaked NTLMv2 hash and relay it to other hosts to achieve privilege escalation or lateral movement depending on network configuration and patch level. |
| Kofax Capture, now referred to as Tungsten Capture, version 6.0.0.0 (other versions may be affected) exposes a deprecated .NET Remoting HTTP channel on port 2424 via the Ascent Capture Service that is accessible without authentication and uses a default, publicly known endpoint identifier. An unauthenticated remote attacker can exploit .NET Remoting object unmarshalling techniques to instantiate a remote System.Net.WebClient object and read arbitrary files from the server filesystem, write attacker-controlled files to the server, or coerce NTLMv2 authentication to an attacker-controlled host, enabling sensitive credential disclosure, denial of service, remote code execution, or lateral movement depending on service account privileges and network environment. |
| Cross-Site Request Forgery (CSRF) vulnerability in Heateor Support Heateor Social Login heateor-social-login allows Cross Site Request Forgery.This issue affects Heateor Social Login: from n/a through <= 1.1.39. |
| Jizhicms v2.5.4 is vulnerable to SQL injection in the product editing module. |
| In Dolibarr ERP & CRM <= 22.0.4, PHP code detection and editing permission enforcement in the Website module is not applied consistently to all input parameters, allowing an authenticated user restricted to HTML/JavaScript editing to inject PHP code through unprotected inputs during website page creation. |
| In the Website module of Dolibarr ERP & CRM 22.0.4 and below, the application uses blacklist-based filtering to restrict dangerous PHP functions related to system command execution. An authenticated user with permission to edit PHP content can bypass this filtering, resulting in full remote code execution with the ability to execute arbitrary operating system commands on the server. |
| PJSIP is a free and open source multimedia communication library written in C. In 2.16 and earlier, there is a buffer overflow when decoding Opus audio frames due to insufficient buffer size validation in the Opus codec decode path. The FEC decode buffers (dec_frame[].buf) were allocated based on a PCM-derived formula: (sample_rate/1000) * 60 * channel_cnt * 2. At 8 kHz mono this yields only 960 bytes, but codec_parse() can output encoded frames up to MAX_ENCODED_PACKET_SIZE (1280) bytes via opus_repacketizer_out_range(). The three pj_memcpy() calls in codec_decode() copied input->size bytes without bounds checking, causing a heap buffer overflow. |
| Decidim is a participatory democracy framework. Starting in version 0.19.0 and prior to versions 0.30.5 and 0.31.1, a vulnerability allows any registered and authenticated user to accept or reject any amendments. The impact is on any users who have created proposals where the amendments feature is enabled. This also elevates the user accepting the amendment as the author of the original proposal as people amending proposals are provided coauthorship on the coauthorable resources. Versions 0.30.5 and 0.31.1 fix the issue. As a workaround, disable amendment reactions for the amendable component (e.g. proposals). |
| PJSIP is a free and open source multimedia communication library written in C. In 2.16 and earlier, a stack buffer overflow exists in pjsip_auth_create_digest2() in PJSIP when using pre-computed digest credentials (PJSIP_CRED_DATA_DIGEST). The function copies credential data using cred_info->data.slen as the length without an upper-bound check, which can overflow the fixed-size ha1 stack buffer (128 bytes) if data.slen exceeds the expected digest string length. |
