| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (pmbus_core) Fix NULL pointer dereference
Pass i2c_client to _pmbus_is_enabled to drop the assumption
that a regulator device is passed in.
This will fix the issue of a NULL pointer dereference when called from
_pmbus_get_flags. |
| Authentication Bypass Using an Alternate Path or Channel vulnerability in Drupal Simple OAuth (OAuth2) & OpenID Connect allows Authentication Bypass.This issue affects Simple OAuth (OAuth2) & OpenID Connect: from 6.0.0 before 6.0.7. |
| In the Linux kernel, the following vulnerability has been resolved:
pnode: terminate at peers of source
The propagate_mnt() function handles mount propagation when creating
mounts and propagates the source mount tree @source_mnt to all
applicable nodes of the destination propagation mount tree headed by
@dest_mnt.
Unfortunately it contains a bug where it fails to terminate at peers of
@source_mnt when looking up copies of the source mount that become
masters for copies of the source mount tree mounted on top of slaves in
the destination propagation tree causing a NULL dereference.
Once the mechanics of the bug are understood it's easy to trigger.
Because of unprivileged user namespaces it is available to unprivileged
users.
While fixing this bug we've gotten confused multiple times due to
unclear terminology or missing concepts. So let's start this with some
clarifications:
* The terms "master" or "peer" denote a shared mount. A shared mount
belongs to a peer group.
* A peer group is a set of shared mounts that propagate to each other.
They are identified by a peer group id. The peer group id is available
in @shared_mnt->mnt_group_id.
Shared mounts within the same peer group have the same peer group id.
The peers in a peer group can be reached via @shared_mnt->mnt_share.
* The terms "slave mount" or "dependent mount" denote a mount that
receives propagation from a peer in a peer group. IOW, shared mounts
may have slave mounts and slave mounts have shared mounts as their
master. Slave mounts of a given peer in a peer group are listed on
that peers slave list available at @shared_mnt->mnt_slave_list.
* The term "master mount" denotes a mount in a peer group. IOW, it
denotes a shared mount or a peer mount in a peer group. The term
"master mount" - or "master" for short - is mostly used when talking
in the context of slave mounts that receive propagation from a master
mount. A master mount of a slave identifies the closest peer group a
slave mount receives propagation from. The master mount of a slave can
be identified via @slave_mount->mnt_master. Different slaves may point
to different masters in the same peer group.
* Multiple peers in a peer group can have non-empty ->mnt_slave_lists.
Non-empty ->mnt_slave_lists of peers don't intersect. Consequently, to
ensure all slave mounts of a peer group are visited the
->mnt_slave_lists of all peers in a peer group have to be walked.
* Slave mounts point to a peer in the closest peer group they receive
propagation from via @slave_mnt->mnt_master (see above). Together with
these peers they form a propagation group (see below). The closest
peer group can thus be identified through the peer group id
@slave_mnt->mnt_master->mnt_group_id of the peer/master that a slave
mount receives propagation from.
* A shared-slave mount is a slave mount to a peer group pg1 while also
a peer in another peer group pg2. IOW, a peer group may receive
propagation from another peer group.
If a peer group pg1 is a slave to another peer group pg2 then all
peers in peer group pg1 point to the same peer in peer group pg2 via
->mnt_master. IOW, all peers in peer group pg1 appear on the same
->mnt_slave_list. IOW, they cannot be slaves to different peer groups.
* A pure slave mount is a slave mount that is a slave to a peer group
but is not a peer in another peer group.
* A propagation group denotes the set of mounts consisting of a single
peer group pg1 and all slave mounts and shared-slave mounts that point
to a peer in that peer group via ->mnt_master. IOW, all slave mounts
such that @slave_mnt->mnt_master->mnt_group_id is equal to
@shared_mnt->mnt_group_id.
The concept of a propagation group makes it easier to talk about a
single propagation level in a propagation tree.
For example, in propagate_mnt() the immediate peers of @dest_mnt and
all slaves of @dest_mnt's peer group form a propagation group pr
---truncated--- |
| MaxKB is an open-source AI assistant for enterprise. In versions prior to 2.3.1, a user can get sensitive informations by Python code in tool module, although the process run in sandbox. Version 2.3.1 fixes the issue. |
| OpenPLC ScadaBR through 0.9.1 on Linux and through 1.12.4 on Windows allows remote authenticated users to upload and execute arbitrary JSP files via view_edit.shtm. |
| ZITADEL is an open source identity management platform. Starting in version 2.50.0 and prior to versions 2.71.19, 3.4.4, and 4.6.6, a vulnerability in ZITADEL's federation process allowed auto-linking users from external identity providers to existing users in ZITADEL even if the corresponding IdP was not active or if the organization did not allow federated authentication. This vulnerability stems from the platform's failure to correctly check or enforce an organization's specific security settings during the authentication flow. An Organization Administrator can explicitly disable an IdP or disallow federation, but this setting was not being honored during the auto-linking process. This allowed an unauthenticated attacker to initiate a login using an IdP that should have been disabled for that organization. The platform would incorrectly validate the login and, based on a matching criteria, link the attacker's external identity to an existing internal user account. This may result in a full Account Takeover, bypassing the organization's mandated security controls. Note that accounts with MFA enabled can not be taken over by this attack. Also note that only IdPs create on an instance level would allow this to work. IdPs registered on another organization would always be denied in the (auto-)linking process. Versions 4.6.6, 3.4.4, and 2.71.19 resolve the issue by correctly validating the organization's login policy before auto-linking an external user. No known workarounds are available aside from upgrading. |
| In the Linux kernel, the following vulnerability has been resolved:
ocxl: fix pci device refcount leak when calling get_function_0()
get_function_0() calls pci_get_domain_bus_and_slot(), as comment
says, it returns a pci device with refcount increment, so after
using it, pci_dev_put() needs be called.
Get the device reference when get_function_0() is not called, so
pci_dev_put() can be called in the error path and callers
unconditionally. And add comment above get_dvsec_vendor0() to tell
callers to call pci_dev_put(). |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: Add null pointer check to attr_load_runs_vcn
Some metadata files are handled before MFT. This adds a null pointer
check for some corner cases that could lead to NPD while reading these
metadata files for a malformed NTFS image.
[ 240.190827] BUG: kernel NULL pointer dereference, address: 0000000000000158
[ 240.191583] #PF: supervisor read access in kernel mode
[ 240.191956] #PF: error_code(0x0000) - not-present page
[ 240.192391] PGD 0 P4D 0
[ 240.192897] Oops: 0000 [#1] PREEMPT SMP KASAN NOPTI
[ 240.193805] CPU: 0 PID: 242 Comm: mount Tainted: G B 5.19.0+ #17
[ 240.194477] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
[ 240.195152] RIP: 0010:ni_find_attr+0xae/0x300
[ 240.195679] Code: c8 48 c7 45 88 c0 4e 5e 86 c7 00 f1 f1 f1 f1 c7 40 04 00 f3 f3 f3 65 48 8b 04 25 28 00 00 00 48 89 45 d0 31 c0 e8 e2 d9f
[ 240.196642] RSP: 0018:ffff88800812f690 EFLAGS: 00000286
[ 240.197019] RAX: 0000000000000001 RBX: 0000000000000000 RCX: ffffffff85ef037a
[ 240.197523] RDX: 0000000000000001 RSI: 0000000000000008 RDI: ffffffff88e95f60
[ 240.197877] RBP: ffff88800812f738 R08: 0000000000000001 R09: fffffbfff11d2bed
[ 240.198292] R10: ffffffff88e95f67 R11: fffffbfff11d2bec R12: 0000000000000000
[ 240.198647] R13: 0000000000000080 R14: 0000000000000000 R15: 0000000000000000
[ 240.199410] FS: 00007f233c33be40(0000) GS:ffff888058200000(0000) knlGS:0000000000000000
[ 240.199895] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 240.200314] CR2: 0000000000000158 CR3: 0000000004d32000 CR4: 00000000000006f0
[ 240.200839] Call Trace:
[ 240.201104] <TASK>
[ 240.201502] ? ni_load_mi+0x80/0x80
[ 240.202297] ? ___slab_alloc+0x465/0x830
[ 240.202614] attr_load_runs_vcn+0x8c/0x1a0
[ 240.202886] ? __kasan_slab_alloc+0x32/0x90
[ 240.203157] ? attr_data_write_resident+0x250/0x250
[ 240.203543] mi_read+0x133/0x2c0
[ 240.203785] mi_get+0x70/0x140
[ 240.204012] ni_load_mi_ex+0xfa/0x190
[ 240.204346] ? ni_std5+0x90/0x90
[ 240.204588] ? __kasan_kmalloc+0x88/0xb0
[ 240.204859] ni_enum_attr_ex+0xf1/0x1c0
[ 240.205107] ? ni_fname_type.part.0+0xd0/0xd0
[ 240.205600] ? ntfs_load_attr_list+0xbe/0x300
[ 240.205864] ? ntfs_cmp_names_cpu+0x125/0x180
[ 240.206157] ntfs_iget5+0x56c/0x1870
[ 240.206510] ? ntfs_get_block_bmap+0x70/0x70
[ 240.206776] ? __kasan_kmalloc+0x88/0xb0
[ 240.207030] ? set_blocksize+0x95/0x150
[ 240.207545] ntfs_fill_super+0xb8f/0x1e20
[ 240.207839] ? put_ntfs+0x1d0/0x1d0
[ 240.208069] ? vsprintf+0x20/0x20
[ 240.208467] ? mutex_unlock+0x81/0xd0
[ 240.208846] ? set_blocksize+0x95/0x150
[ 240.209221] get_tree_bdev+0x232/0x370
[ 240.209804] ? put_ntfs+0x1d0/0x1d0
[ 240.210519] ntfs_fs_get_tree+0x15/0x20
[ 240.210991] vfs_get_tree+0x4c/0x130
[ 240.211455] path_mount+0x645/0xfd0
[ 240.211806] ? putname+0x80/0xa0
[ 240.212112] ? finish_automount+0x2e0/0x2e0
[ 240.212559] ? kmem_cache_free+0x110/0x390
[ 240.212906] ? putname+0x80/0xa0
[ 240.213329] do_mount+0xd6/0xf0
[ 240.213829] ? path_mount+0xfd0/0xfd0
[ 240.214246] ? __kasan_check_write+0x14/0x20
[ 240.214774] __x64_sys_mount+0xca/0x110
[ 240.215080] do_syscall_64+0x3b/0x90
[ 240.215442] entry_SYSCALL_64_after_hwframe+0x63/0xcd
[ 240.215811] RIP: 0033:0x7f233b4e948a
[ 240.216104] Code: 48 8b 0d 11 fa 2a 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 008
[ 240.217615] RSP: 002b:00007fff02211ec8 EFLAGS: 00000202 ORIG_RAX: 00000000000000a5
[ 240.218718] RAX: ffffffffffffffda RBX: 0000561cdc35b060 RCX: 00007f233b4e948a
[ 240.219556] RDX: 0000561cdc35b260 RSI: 0000561cdc35b2e0 RDI: 0000561cdc363af0
[ 240.219975] RBP: 0000000000000000 R08: 0000561cdc35b280 R09: 0000000000000020
[ 240.220403] R10: 00000000c0ed0000 R11: 0000000000000202 R12: 0000561cdc363af0
[ 240.220803] R13: 000
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
9p: set req refcount to zero to avoid uninitialized usage
When a new request is allocated, the refcount will be zero if it is
reused, but if the request is newly allocated from slab, it is not fully
initialized before being added to idr.
If the p9_read_work got a response before the refcount initiated. It will
use a uninitialized req, which will result in a bad request data struct.
Here is the logs from syzbot.
Corrupted memory at 0xffff88807eade00b [ 0xff 0x07 0x00 0x00 0x00 0x00
0x00 0x00 . . . . . . . . ] (in kfence-#110):
p9_fcall_fini net/9p/client.c:248 [inline]
p9_req_put net/9p/client.c:396 [inline]
p9_req_put+0x208/0x250 net/9p/client.c:390
p9_client_walk+0x247/0x540 net/9p/client.c:1165
clone_fid fs/9p/fid.h:21 [inline]
v9fs_fid_xattr_set+0xe4/0x2b0 fs/9p/xattr.c:118
v9fs_xattr_set fs/9p/xattr.c:100 [inline]
v9fs_xattr_handler_set+0x6f/0x120 fs/9p/xattr.c:159
__vfs_setxattr+0x119/0x180 fs/xattr.c:182
__vfs_setxattr_noperm+0x129/0x5f0 fs/xattr.c:216
__vfs_setxattr_locked+0x1d3/0x260 fs/xattr.c:277
vfs_setxattr+0x143/0x340 fs/xattr.c:309
setxattr+0x146/0x160 fs/xattr.c:617
path_setxattr+0x197/0x1c0 fs/xattr.c:636
__do_sys_setxattr fs/xattr.c:652 [inline]
__se_sys_setxattr fs/xattr.c:648 [inline]
__ia32_sys_setxattr+0xc0/0x160 fs/xattr.c:648
do_syscall_32_irqs_on arch/x86/entry/common.c:112 [inline]
__do_fast_syscall_32+0x65/0xf0 arch/x86/entry/common.c:178
do_fast_syscall_32+0x33/0x70 arch/x86/entry/common.c:203
entry_SYSENTER_compat_after_hwframe+0x70/0x82
Below is a similar scenario, the scenario in the syzbot log looks more
complicated than this one, but this patch can fix it.
T21124 p9_read_work
======================== second trans =================================
p9_client_walk
p9_client_rpc
p9_client_prepare_req
p9_tag_alloc
req = kmem_cache_alloc(p9_req_cache, GFP_NOFS);
tag = idr_alloc
<< preempted >>
req->tc.tag = tag;
/* req->[refcount/tag] == uninitialized */
m->rreq = p9_tag_lookup(m->client, m->rc.tag);
/* increments uninitalized refcount */
refcount_set(&req->refcount, 2);
/* cb drops one ref */
p9_client_cb(req)
/* reader thread drops its ref:
request is incorrectly freed */
p9_req_put(req)
/* use after free and ref underflow */
p9_req_put(req)
To fix it, we can initialize the refcount to zero before add to idr. |
| In the Linux kernel, the following vulnerability has been resolved:
video/aperture: Call sysfb_disable() before removing PCI devices
Call sysfb_disable() from aperture_remove_conflicting_pci_devices()
before removing PCI devices. Without, simpledrm can still bind to
simple-framebuffer devices after the hardware driver has taken over
the hardware. Both drivers interfere with each other and results are
undefined.
Reported modesetting errors [1] are shown below.
---- snap ----
rcu: INFO: rcu_sched detected expedited stalls on CPUs/tasks: { 13-.... } 7 jiffies s: 165 root: 0x2000/.
rcu: blocking rcu_node structures (internal RCU debug):
Task dump for CPU 13:
task:X state:R running task stack: 0 pid: 4242 ppid: 4228 flags:0x00000008
Call Trace:
<TASK>
? commit_tail+0xd7/0x130
? drm_atomic_helper_commit+0x126/0x150
? drm_atomic_commit+0xa4/0xe0
? drm_plane_get_damage_clips.cold+0x1c/0x1c
? drm_atomic_helper_dirtyfb+0x19e/0x280
? drm_mode_dirtyfb_ioctl+0x10f/0x1e0
? drm_mode_getfb2_ioctl+0x2d0/0x2d0
? drm_ioctl_kernel+0xc4/0x150
? drm_ioctl+0x246/0x3f0
? drm_mode_getfb2_ioctl+0x2d0/0x2d0
? __x64_sys_ioctl+0x91/0xd0
? do_syscall_64+0x60/0xd0
? entry_SYSCALL_64_after_hwframe+0x4b/0xb5
</TASK>
...
rcu: INFO: rcu_sched detected expedited stalls on CPUs/tasks: { 13-.... } 30 jiffies s: 169 root: 0x2000/.
rcu: blocking rcu_node structures (internal RCU debug):
Task dump for CPU 13:
task:X state:R running task stack: 0 pid: 4242 ppid: 4228 flags:0x0000400e
Call Trace:
<TASK>
? memcpy_toio+0x76/0xc0
? memcpy_toio+0x1b/0xc0
? drm_fb_memcpy_toio+0x76/0xb0
? drm_fb_blit_toio+0x75/0x2b0
? simpledrm_simple_display_pipe_update+0x132/0x150
? drm_atomic_helper_commit_planes+0xb6/0x230
? drm_atomic_helper_commit_tail+0x44/0x80
? commit_tail+0xd7/0x130
? drm_atomic_helper_commit+0x126/0x150
? drm_atomic_commit+0xa4/0xe0
? drm_plane_get_damage_clips.cold+0x1c/0x1c
? drm_atomic_helper_dirtyfb+0x19e/0x280
? drm_mode_dirtyfb_ioctl+0x10f/0x1e0
? drm_mode_getfb2_ioctl+0x2d0/0x2d0
? drm_ioctl_kernel+0xc4/0x150
? drm_ioctl+0x246/0x3f0
? drm_mode_getfb2_ioctl+0x2d0/0x2d0
? __x64_sys_ioctl+0x91/0xd0
? do_syscall_64+0x60/0xd0
? entry_SYSCALL_64_after_hwframe+0x4b/0xb5
</TASK>
The problem was added by commit 5e0137612430 ("video/aperture: Disable
and unregister sysfb devices via aperture helpers") to v6.0.3 and does
not exist in the mainline branch.
The mainline commit 5e0137612430 ("video/aperture: Disable and
unregister sysfb devices via aperture helpers") has been backported
from v6.0-rc1 to stable v6.0.3 from a larger patch series [2] that
reworks fbdev framebuffer ownership. The backport misses a change to
aperture_remove_conflicting_pci_devices(). Mainline itself is fine,
because the function does not exist there as a result of the patch
series.
Instead of backporting the whole series, fix the additional function. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: cavium - prevent integer overflow loading firmware
The "code_length" value comes from the firmware file. If your firmware
is untrusted realistically there is probably very little you can do to
protect yourself. Still we try to limit the damage as much as possible.
Also Smatch marks any data read from the filesystem as untrusted and
prints warnings if it not capped correctly.
The "ntohl(ucode->code_length) * 2" multiplication can have an
integer overflow. |
| In the Linux kernel, the following vulnerability has been resolved:
block, bfq: fix uaf for bfqq in bfq_exit_icq_bfqq
Commit 64dc8c732f5c ("block, bfq: fix possible uaf for 'bfqq->bic'")
will access 'bic->bfqq' in bic_set_bfqq(), however, bfq_exit_icq_bfqq()
can free bfqq first, and then call bic_set_bfqq(), which will cause uaf.
Fix the problem by moving bfq_exit_bfqq() behind bic_set_bfqq(). |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: Intel: avs: Fix potential RX buffer overflow
If an event caused firmware to return invalid RX size for
LARGE_CONFIG_GET, memcpy_fromio() could end up copying too many bytes.
Fix by utilizing min_t(). |
| In Modem, there is a possible system crash due to an incorrect bounds check. This could lead to remote denial of service, if a UE has connected to a rogue base station controlled by the attacker, with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: MOLY01689251; Issue ID: MSV-4840. |
| The ASN.1 parser in strongSwan before 5.5.3 improperly handles CHOICE types when the x509 plugin is enabled, which allows remote attackers to cause a denial of service (infinite loop) via a crafted certificate. |
| The gmp plugin in strongSwan before 5.5.3 does not properly validate RSA public keys before calling mpz_powm_sec, which allows remote peers to cause a denial of service (floating point exception and process crash) via a crafted certificate. |
| A flaw in libxml2 allows remote XML entity inclusion with default parser flags (i.e., when the caller did not request entity substitution, DTD validation, external DTD subset loading, or default DTD attributes). Depending on the context, this may expose a higher-risk attack surface in libxml2 not usually reachable with default parser flags, and expose content from local files, HTTP, or FTP servers (which might be otherwise unreachable). |
| avahi-daemon in Avahi through 0.6.32 and 0.7 inadvertently responds to IPv6 unicast queries with source addresses that are not on-link, which allows remote attackers to cause a denial of service (traffic amplification) and may cause information leakage by obtaining potentially sensitive information from the responding device via port-5353 UDP packets. NOTE: this may overlap CVE-2015-2809. |
| An integer overflow in xmlmemory.c in libxml2 before 2.9.5, as used in Google Chrome prior to 62.0.3202.62 and other products, allowed a remote attacker to potentially exploit heap corruption via a crafted XML file. |
| A vulnerability was identified in moxi159753 Mogu Blog v2 up to 5.2. This issue affects some unknown processing of the file /storage/ of the component Storage Management Endpoint. The manipulation leads to missing authorization. The attack can be initiated remotely. The attack's complexity is rated as high. The exploitability is assessed as difficult. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way. |
