| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Improper validation of specified type of input in SQL Server allows an authorized attacker to elevate privileges over a network. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf/bonding: reject vlan+srcmac xmit_hash_policy change when XDP is loaded
bond_option_mode_set() already rejects mode changes that would make a
loaded XDP program incompatible via bond_xdp_check(). However,
bond_option_xmit_hash_policy_set() has no such guard.
For 802.3ad and balance-xor modes, bond_xdp_check() returns false when
xmit_hash_policy is vlan+srcmac, because the 802.1q payload is usually
absent due to hardware offload. This means a user can:
1. Attach a native XDP program to a bond in 802.3ad/balance-xor mode
with a compatible xmit_hash_policy (e.g. layer2+3).
2. Change xmit_hash_policy to vlan+srcmac while XDP remains loaded.
This leaves bond->xdp_prog set but bond_xdp_check() now returning false
for the same device. When the bond is later destroyed, dev_xdp_uninstall()
calls bond_xdp_set(dev, NULL, NULL) to remove the program, which hits
the bond_xdp_check() guard and returns -EOPNOTSUPP, triggering:
WARN_ON(dev_xdp_install(dev, mode, bpf_op, NULL, 0, NULL))
Fix this by rejecting xmit_hash_policy changes to vlan+srcmac when an
XDP program is loaded on a bond in 802.3ad or balance-xor mode.
commit 39a0876d595b ("net, bonding: Disallow vlan+srcmac with XDP")
introduced bond_xdp_check() which returns false for 802.3ad/balance-xor
modes when xmit_hash_policy is vlan+srcmac. The check was wired into
bond_xdp_set() to reject XDP attachment with an incompatible policy, but
the symmetric path -- preventing xmit_hash_policy from being changed to an
incompatible value after XDP is already loaded -- was left unguarded in
bond_option_xmit_hash_policy_set().
Note:
commit 094ee6017ea0 ("bonding: check xdp prog when set bond mode")
later added a similar guard to bond_option_mode_set(), but
bond_option_xmit_hash_policy_set() remained unprotected. |
| In the Linux kernel, the following vulnerability has been resolved:
net: usb: kaweth: validate USB endpoints
The kaweth driver should validate that the device it is probing has the
proper number and types of USB endpoints it is expecting before it binds
to it. If a malicious device were to not have the same urbs the driver
will crash later on when it blindly accesses these endpoints. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-audio: Use correct version for UAC3 header validation
The entry of the validators table for UAC3 AC header descriptor is
defined with the wrong protocol version UAC_VERSION_2, while it should
have been UAC_VERSION_3. This results in the validator never matching
for actual UAC3 devices (protocol == UAC_VERSION_3), causing their
header descriptors to bypass validation entirely. A malicious USB
device presenting a truncated UAC3 header could exploit this to cause
out-of-bounds reads when the driver later accesses unvalidated
descriptor fields.
The bug was introduced in the same commit as the recently fixed UAC3
feature unit sub-type typo, and appears to be from the same copy-paste
error when the UAC3 section was created from the UAC2 section. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/userq: Do not allow userspace to trivially triger kernel warnings
Userspace can either deliberately pass in the too small num_fences, or the
required number can legitimately grow between the two calls to the userq
wait ioctl. In both cases we do not want the emit the kernel warning
backtrace since nothing is wrong with the kernel and userspace will simply
get an errno reported back. So lets simply drop the WARN_ONs.
(cherry picked from commit 2c333ea579de6cc20ea7bc50e9595ef72863e65c) |
| In the Linux kernel, the following vulnerability has been resolved:
net: usb: kalmia: validate USB endpoints
The kalmia driver should validate that the device it is probing has the
proper number and types of USB endpoints it is expecting before it binds
to it. If a malicious device were to not have the same urbs the driver
will crash later on when it blindly accesses these endpoints. |
| In the Linux kernel, the following vulnerability has been resolved:
gve: fix incorrect buffer cleanup in gve_tx_clean_pending_packets for QPL
In DQ-QPL mode, gve_tx_clean_pending_packets() incorrectly uses the RDA
buffer cleanup path. It iterates num_bufs times and attempts to unmap
entries in the dma array.
This leads to two issues:
1. The dma array shares storage with tx_qpl_buf_ids (union).
Interpreting buffer IDs as DMA addresses results in attempting to
unmap incorrect memory locations.
2. num_bufs in QPL mode (counting 2K chunks) can significantly exceed
the size of the dma array, causing out-of-bounds access warnings
(trace below is how we noticed this issue).
UBSAN: array-index-out-of-bounds in
drivers/net/ethernet/drivers/net/ethernet/google/gve/gve_tx_dqo.c:178:5 index 18 is out of
range for type 'dma_addr_t[18]' (aka 'unsigned long long[18]')
Workqueue: gve gve_service_task [gve]
Call Trace:
<TASK>
dump_stack_lvl+0x33/0xa0
__ubsan_handle_out_of_bounds+0xdc/0x110
gve_tx_stop_ring_dqo+0x182/0x200 [gve]
gve_close+0x1be/0x450 [gve]
gve_reset+0x99/0x120 [gve]
gve_service_task+0x61/0x100 [gve]
process_scheduled_works+0x1e9/0x380
Fix this by properly checking for QPL mode and delegating to
gve_free_tx_qpl_bufs() to reclaim the buffers. |
| In the Linux kernel, the following vulnerability has been resolved:
Squashfs: check metadata block offset is within range
Syzkaller reports a "general protection fault in squashfs_copy_data"
This is ultimately caused by a corrupted index look-up table, which
produces a negative metadata block offset.
This is subsequently passed to squashfs_copy_data (via
squashfs_read_metadata) where the negative offset causes an out of bounds
access.
The fix is to check that the offset is within range in
squashfs_read_metadata. This will trap this and other cases. |
| GitLab has remediated an issue in GitLab CE/EE affecting all versions from 16.10 before 18.8.7, 18.9 before 18.9.3, and 18.10 before 18.10.1 that could have allowed an authenticated user to cause a denial of service due to excessive resource consumption when processing certain webhook configuration inputs. |
| NATS-Server is a High-Performance server for NATS.io, a cloud and edge native messaging system. Starting in version 2.2.0 and prior to versions 2.11.14 and 2.12.5, a missing sanity check on a WebSockets frame could trigger a server panic in the nats-server. This happens before authentication, and so is exposed to anyone who can connect to the websockets port. Versions 2.11.14 and 2.12.5 contains a fix. A workaround is available. The vulnerability only affects deployments which use WebSockets and which expose the network port to untrusted end-points. If one is able to do so, a defense in depth of restricting either of these will mitigate the attack. |
| NATS-Server is a High-Performance server for NATS.io, a cloud and edge native messaging system. Prior to versions 2.11.15 and 2.12.6, a client which can connect to the leafnode port can crash the nats-server with a certain malformed message pre-authentication. Versions 2.11.15 and 2.12.6 contain a fix. As a workaround, disable leafnode support if not needed or restrict network connections to the leafnode port, if plausible without compromising the service offered. |
| fast-xml-parser allows users to process XML from JS object without C/C++ based libraries or callbacks. From version 4.0.0-beta.3 to before version 5.5.7, the DocTypeReader in fast-xml-parser uses JavaScript truthy checks to evaluate maxEntityCount and maxEntitySize configuration limits. When a developer explicitly sets either limit to 0 — intending to disallow all entities or restrict entity size to zero bytes — the falsy nature of 0 in JavaScript causes the guard conditions to short-circuit, completely bypassing the limits. An attacker who can supply XML input to such an application can trigger unbounded entity expansion, leading to memory exhaustion and denial of service. This issue has been patched in version 5.5.7. |
| A vulnerability in the Lobby Ambassador web-based management API of Cisco IOS XE Software could allow an authenticated, remote attacker to elevate their privileges and access management APIs that would not normally be available for Lobby Ambassador users.
This vulnerability exists because parameters that are received by an API endpoint are not sufficiently validated. An attacker could exploit this vulnerability by authenticating as a Lobby Ambassador user and sending a crafted HTTP request to an affected device. A successful exploit could allow the attacker to create a new user with privilege level 1 access to the web-based management API. The attacker would then be able to access the device with these new credentials and privileges. |
| A maliciously crafted TIFF file can cause image decoding to attempt to allocate up 4GiB of memory, causing either excessive resource consumption or an out-of-memory error. |
| BulletProof FTP Server 2019.0.0.50 contains a denial of service vulnerability in the Storage-Path configuration parameter that allows local attackers to crash the application by supplying an excessively long string value. Attackers can enable the Override Storage-Path setting and paste a buffer of 500 bytes or more to trigger an application crash when saving the configuration. |
| BulletProof FTP Server 2019.0.0.50 contains a denial of service vulnerability in the DNS Address field that allows local attackers to crash the application by supplying an excessively long string. Attackers can enable the DNS Address option in the Firewall settings and paste a buffer of 700 bytes to trigger a crash when the Test function is invoked. |
| Blob Studio 2.17 contains a denial of service vulnerability that allows local attackers to crash the application by providing malformed input through the key entry mechanism. Attackers can create a text file with a large buffer of repeated characters and trigger the application to read it, causing the application to crash or become unresponsive. |
| zlib before 1.3.2 allows CPU consumption via crc32_combine64 and crc32_combine_gen64 because x2nmodp can do right shifts within a loop that has no termination condition. |
| systemd, a system and service manager, (as PID 1) hits an assert and freezes execution when an unprivileged IPC API call is made with spurious data. On version v249 and older the effect is not an assert, but stack overwriting, with the attacker controlled content. From version v250 and newer this is not possible as the safety check causes an assert instead. This IPC call was added in v239, so versions older than that are not affected. Versions 260-rc1, 259.2, 258.5, and 257.11 contain patches. No known workarounds are available. |
| Active Storage allows users to attach cloud and local files in Rails applications. Prior to versions 8.1.2.1, 8.0.4.1, and 7.2.3.1, `DirectUploadsController` accepts arbitrary metadata from the client and persists it on the blob. Because internal flags like `identified` and `analyzed` are stored in the same metadata hash, a direct-upload client can set these flags to skip MIME detection and analysis. This allows an attacker to upload arbitrary content while claiming a safe `content_type`, bypassing any validations that rely on Active Storage's automatic content type identification. Versions 8.1.2.1, 8.0.4.1, and 7.2.3.1 contain a patch. |
