| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
bpf/bonding: reject vlan+srcmac xmit_hash_policy change when XDP is loaded
bond_option_mode_set() already rejects mode changes that would make a
loaded XDP program incompatible via bond_xdp_check(). However,
bond_option_xmit_hash_policy_set() has no such guard.
For 802.3ad and balance-xor modes, bond_xdp_check() returns false when
xmit_hash_policy is vlan+srcmac, because the 802.1q payload is usually
absent due to hardware offload. This means a user can:
1. Attach a native XDP program to a bond in 802.3ad/balance-xor mode
with a compatible xmit_hash_policy (e.g. layer2+3).
2. Change xmit_hash_policy to vlan+srcmac while XDP remains loaded.
This leaves bond->xdp_prog set but bond_xdp_check() now returning false
for the same device. When the bond is later destroyed, dev_xdp_uninstall()
calls bond_xdp_set(dev, NULL, NULL) to remove the program, which hits
the bond_xdp_check() guard and returns -EOPNOTSUPP, triggering:
WARN_ON(dev_xdp_install(dev, mode, bpf_op, NULL, 0, NULL))
Fix this by rejecting xmit_hash_policy changes to vlan+srcmac when an
XDP program is loaded on a bond in 802.3ad or balance-xor mode.
commit 39a0876d595b ("net, bonding: Disallow vlan+srcmac with XDP")
introduced bond_xdp_check() which returns false for 802.3ad/balance-xor
modes when xmit_hash_policy is vlan+srcmac. The check was wired into
bond_xdp_set() to reject XDP attachment with an incompatible policy, but
the symmetric path -- preventing xmit_hash_policy from being changed to an
incompatible value after XDP is already loaded -- was left unguarded in
bond_option_xmit_hash_policy_set().
Note:
commit 094ee6017ea0 ("bonding: check xdp prog when set bond mode")
later added a similar guard to bond_option_mode_set(), but
bond_option_xmit_hash_policy_set() remained unprotected. |
| In the Linux kernel, the following vulnerability has been resolved:
net: usb: kaweth: validate USB endpoints
The kaweth driver should validate that the device it is probing has the
proper number and types of USB endpoints it is expecting before it binds
to it. If a malicious device were to not have the same urbs the driver
will crash later on when it blindly accesses these endpoints. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-audio: Use correct version for UAC3 header validation
The entry of the validators table for UAC3 AC header descriptor is
defined with the wrong protocol version UAC_VERSION_2, while it should
have been UAC_VERSION_3. This results in the validator never matching
for actual UAC3 devices (protocol == UAC_VERSION_3), causing their
header descriptors to bypass validation entirely. A malicious USB
device presenting a truncated UAC3 header could exploit this to cause
out-of-bounds reads when the driver later accesses unvalidated
descriptor fields.
The bug was introduced in the same commit as the recently fixed UAC3
feature unit sub-type typo, and appears to be from the same copy-paste
error when the UAC3 section was created from the UAC2 section. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/userq: Do not allow userspace to trivially triger kernel warnings
Userspace can either deliberately pass in the too small num_fences, or the
required number can legitimately grow between the two calls to the userq
wait ioctl. In both cases we do not want the emit the kernel warning
backtrace since nothing is wrong with the kernel and userspace will simply
get an errno reported back. So lets simply drop the WARN_ONs.
(cherry picked from commit 2c333ea579de6cc20ea7bc50e9595ef72863e65c) |
| In the Linux kernel, the following vulnerability has been resolved:
net: usb: kalmia: validate USB endpoints
The kalmia driver should validate that the device it is probing has the
proper number and types of USB endpoints it is expecting before it binds
to it. If a malicious device were to not have the same urbs the driver
will crash later on when it blindly accesses these endpoints. |
| In the Linux kernel, the following vulnerability has been resolved:
gve: fix incorrect buffer cleanup in gve_tx_clean_pending_packets for QPL
In DQ-QPL mode, gve_tx_clean_pending_packets() incorrectly uses the RDA
buffer cleanup path. It iterates num_bufs times and attempts to unmap
entries in the dma array.
This leads to two issues:
1. The dma array shares storage with tx_qpl_buf_ids (union).
Interpreting buffer IDs as DMA addresses results in attempting to
unmap incorrect memory locations.
2. num_bufs in QPL mode (counting 2K chunks) can significantly exceed
the size of the dma array, causing out-of-bounds access warnings
(trace below is how we noticed this issue).
UBSAN: array-index-out-of-bounds in
drivers/net/ethernet/drivers/net/ethernet/google/gve/gve_tx_dqo.c:178:5 index 18 is out of
range for type 'dma_addr_t[18]' (aka 'unsigned long long[18]')
Workqueue: gve gve_service_task [gve]
Call Trace:
<TASK>
dump_stack_lvl+0x33/0xa0
__ubsan_handle_out_of_bounds+0xdc/0x110
gve_tx_stop_ring_dqo+0x182/0x200 [gve]
gve_close+0x1be/0x450 [gve]
gve_reset+0x99/0x120 [gve]
gve_service_task+0x61/0x100 [gve]
process_scheduled_works+0x1e9/0x380
Fix this by properly checking for QPL mode and delegating to
gve_free_tx_qpl_bufs() to reclaim the buffers. |
| In the Linux kernel, the following vulnerability has been resolved:
Squashfs: check metadata block offset is within range
Syzkaller reports a "general protection fault in squashfs_copy_data"
This is ultimately caused by a corrupted index look-up table, which
produces a negative metadata block offset.
This is subsequently passed to squashfs_copy_data (via
squashfs_read_metadata) where the negative offset causes an out of bounds
access.
The fix is to check that the offset is within range in
squashfs_read_metadata. This will trap this and other cases. |
| A vulnerability in the bootloader of Cisco IOS XE Software for Cisco Catalyst 9200 Series Switches, Cisco Catalyst ESS9300 Embedded Series Switches, Cisco Catalyst IE9310 and IE9320 Rugged Series Switches, and Cisco IE3500 and IE3505 Rugged Series Switches could allow an authenticated, local attacker with level-15 privileges or an unauthenticated attacker with physical access to an affected device to execute arbitrary code at boot time and break the chain of trust.
This vulnerability is due to insufficient validation of software at boot time. An attacker could exploit this vulnerability by manipulating the loaded binaries on an affected device to bypass some of the integrity checks that are performed during the boot process. A successful exploit could allow the attacker to execute code that bypasses the requirement to run Cisco-signed images.
Cisco has assigned this security advisory a Security Impact Rating (SIR) of High rather than Medium as the score indicates because this vulnerability allows an attacker to bypass a major security feature of a device. |
| GitLab has remediated an issue in GitLab CE/EE affecting all versions from 16.10 before 18.8.7, 18.9 before 18.9.3, and 18.10 before 18.10.1 that could have allowed an authenticated user to cause a denial of service due to excessive resource consumption when processing certain webhook configuration inputs. |
| NATS-Server is a High-Performance server for NATS.io, a cloud and edge native messaging system. Starting in version 2.2.0 and prior to versions 2.11.14 and 2.12.5, a missing sanity check on a WebSockets frame could trigger a server panic in the nats-server. This happens before authentication, and so is exposed to anyone who can connect to the websockets port. Versions 2.11.14 and 2.12.5 contains a fix. A workaround is available. The vulnerability only affects deployments which use WebSockets and which expose the network port to untrusted end-points. If one is able to do so, a defense in depth of restricting either of these will mitigate the attack. |
| NATS-Server is a High-Performance server for NATS.io, a cloud and edge native messaging system. Prior to versions 2.11.15 and 2.12.6, a client which can connect to the leafnode port can crash the nats-server with a certain malformed message pre-authentication. Versions 2.11.15 and 2.12.6 contain a fix. As a workaround, disable leafnode support if not needed or restrict network connections to the leafnode port, if plausible without compromising the service offered. |
| NATS-Server is a High-Performance server for NATS.io, a cloud and edge native messaging system. Starting in version 2.11.0 and prior to versions 2.11.15 and 2.12.6, a valid client which uses message tracing headers can indicate that the trace messages can be sent to an arbitrary valid subject, including those to which the client does not have publish permission. The payload is a valid trace message and not chosen by the attacker. Versions 2.11.15 and 2.12.6 contain a fix. No known workarounds are available. |
| IBM Concert 1.0.0 through 2.2.0 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information |
| Out-of-bounds read in ALPN parsing due to incomplete validation. wolfSSL 5.8.4 and earlier contained an out-of-bounds read in ALPN handling when built with ALPN enabled (HAVE_ALPN / --enable-alpn). A crafted ALPN protocol list could trigger an out-of-bounds read, leading to a potential process crash (denial of service). Note that ALPN is disabled by default, but is enabled for these 3rd party compatibility features: enable-apachehttpd, enable-bind, enable-curl, enable-haproxy, enable-hitch, enable-lighty, enable-jni, enable-nginx, enable-quic. |
| Heap-based buffer overflow in the KCAPI ECC code path of wc_ecc_import_x963_ex() in wolfSSL wolfcrypt allows a remote attacker to write attacker-controlled data past the bounds of the pubkey_raw buffer via a crafted oversized EC public key point. The WOLFSSL_KCAPI_ECC code path copies the input to key->pubkey_raw (132 bytes) using XMEMCPY without a bounds check, unlike the ATECC code path which includes a length validation. This can be triggered during TLS key exchange when a malicious peer sends a crafted ECPoint in ServerKeyExchange. |
| An integer overflow vulnerability existed in the static function wolfssl_add_to_chain, that caused heap corruption when certificate data was written out of bounds of an insufficiently sized certificate buffer. wolfssl_add_to_chain is called by these API: wolfSSL_CTX_add_extra_chain_cert, wolfSSL_CTX_add1_chain_cert, wolfSSL_add0_chain_cert. These API are enabled for 3rd party compatibility features: enable-opensslall, enable-opensslextra, enable-lighty, enable-stunnel, enable-nginx, enable-haproxy. This issue is not remotely exploitable, and would require that the application context loading certificates is compromised. |
| XnSoft NConvert 7.230 is vulnerable to Stack Buffer Overrun via a crafted .tiff file. |
| NGINX Open Source and NGINX Plus have a vulnerability in the ngx_http_mp4_module module, which might allow an attacker to trigger a buffer over-read or over-write to the NGINX worker memory resulting in its termination or possibly code execution, using a specially crafted MP4 file. This issue affects NGINX Open Source and NGINX Plus if it is built with the ngx_http_mp4_module module and the mp4 directive is used in the configuration file. Additionally, the attack is possible only if an attacker can trigger the processing of a specially crafted MP4 file with the ngx_http_mp4_module module.
Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| NGINX Open Source and NGINX Plus have a vulnerability in the ngx_http_dav_module module that might allow an attacker to trigger a buffer overflow to the NGINX worker process; this vulnerability may result in termination of the NGINX worker process or modification of source or destination file names outside the document root. This issue affects NGINX Open Source and NGINX Plus when the configuration file uses DAV module MOVE or COPY methods, prefix location (nonregular expression location configuration), and alias directives. The integrity impact is constrained because the NGINX worker process user has low privileges and does not have access to the entire system. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| fast-xml-parser allows users to process XML from JS object without C/C++ based libraries or callbacks. From version 4.0.0-beta.3 to before version 5.5.7, the DocTypeReader in fast-xml-parser uses JavaScript truthy checks to evaluate maxEntityCount and maxEntitySize configuration limits. When a developer explicitly sets either limit to 0 — intending to disallow all entities or restrict entity size to zero bytes — the falsy nature of 0 in JavaScript causes the guard conditions to short-circuit, completely bypassing the limits. An attacker who can supply XML input to such an application can trigger unbounded entity expansion, leading to memory exhaustion and denial of service. This issue has been patched in version 5.5.7. |
