| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In versions <8.4.0, <8.3.2, <8.2.2, <8.1.3, <8.0.4, <7.13.6, <7.12.7, <7.11.7, and <7.10.10, the endpoints /api/apps/logs and /api/apps/:id/logs have a typo in the required permission check, allowing authenticated users without the proper permissions to read apps-engine logs. |
| melange allows users to build apk packages using declarative pipelines. Starting in version 0.32.0 and prior to version 0.43.4, an attacker who can influence a melange configuration file — for example through pull-request-driven CI or build-as-a-service scenarios — could set `pipeline[].uses` to a value containing `../` sequences or an absolute path. The `(*Compiled).compilePipeline` function in `pkg/build/compile.go` passed `uses` directly to `filepath.Join(pipelineDir, uses + ".yaml")` without validating the value, so the resolved path could escape each `--pipeline-dir` and read an arbitrary YAML-parseable file visible to the melange process. Because the loaded file is subsequently interpreted as a melange pipeline and its `runs:` block is executed via `/bin/sh -c` in the build sandbox, this additionally allowed shell commands sourced from an out-of-tree file to run during the build, bypassing the review boundary that normally covers the in-tree pipeline definition. The issue is fixed in melange v0.43.4 via commit 5829ca4. The fix rejects `uses` values that are absolute paths or contain `..`, and verifies (via `filepath.Rel` after `filepath.Clean`) that the resolved target remains within the pipeline directory. As a workaround, only run `melange build` against configuration files from trusted sources. In CI systems that build user-supplied melange configs, gate builds behind manual review of `pipeline[].uses` values and reject any containing `..` or leading `/`. |
| Software which sets SO_REUSEPORT_LB on a socket and then connects it to a host will not directly observe any problems. However, due to its membership in a load-balancing group, that socket will receive packets originating from any host. This breaks the contract of the connect(2) and implied connect via sendto(2), and may leave the application vulnerable to spoofing attacks.
The kernel failed to check the connection state of sockets when adding them to load-balancing groups. Furthermore, when looking up the destination socket for an incoming packet, the kernel will match a socket belonging to a load-balancing group even if it is connected, in violation of the contract that connected sockets are only supposed to receive packets originating from the connected host. |
| An authorization vulnerability exists in GitLab versions 14.0 prior to 16.6.6, 16.7 prior to 16.7.4, and 16.8 prior to 16.8.1. An unauthorized attacker is able to assign arbitrary users to MRs that they created within the project |
| A missing authorization check vulnerability exists in GitLab Remote Development affecting all versions prior to 16.5.6, 16.6 prior to 16.6.4 and 16.7 prior to 16.7.2. This condition allows an attacker to create a workspace in one group that is associated with an agent from another group. |
| Flowise is a drag & drop user interface to build a customized large language model flow. Prior to 3.1.0, the GraphCypherQAChain node forwards user-provided input directly into the Cypher query execution pipeline without proper sanitization. An attacker can inject arbitrary Cypher commands that are executed on the underlying Neo4j database, enabling data exfiltration, modification, or deletion. This vulnerability is fixed in 3.1.0. |
| LeRobot through 0.5.1 contains an unsafe deserialization vulnerability in the async inference pipeline where pickle.loads() is used to deserialize data received over unauthenticated gRPC channels without TLS in the policy server and robot client components. An unauthenticated network-reachable attacker can achieve arbitrary code execution on the server or client by sending a crafted pickle payload through the SendPolicyInstructions, SendObservations, or GetActions gRPC calls. |
| In the Linux kernel, the following vulnerability has been resolved:
pinctrl: pinconf-generic: Fix memory leak in pinconf_generic_parse_dt_config()
In pinconf_generic_parse_dt_config(), if parse_dt_cfg() fails, it returns
directly. This bypasses the cleanup logic and results in a memory leak of
the cfg buffer.
Fix this by jumping to the out label on failure, ensuring kfree(cfg) is
called before returning. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/userq: Do not allow userspace to trivially triger kernel warnings
Userspace can either deliberately pass in the too small num_fences, or the
required number can legitimately grow between the two calls to the userq
wait ioctl. In both cases we do not want the emit the kernel warning
backtrace since nothing is wrong with the kernel and userspace will simply
get an errno reported back. So lets simply drop the WARN_ONs.
(cherry picked from commit 2c333ea579de6cc20ea7bc50e9595ef72863e65c) |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: nci: free skb on nci_transceive early error paths
nci_transceive() takes ownership of the skb passed by the caller,
but the -EPROTO, -EINVAL, and -EBUSY error paths return without
freeing it.
Due to issues clearing NCI_DATA_EXCHANGE fixed by subsequent changes
the nci/nci_dev selftest hits the error path occasionally in NIPA,
and kmemleak detects leaks:
unreferenced object 0xff11000015ce6a40 (size 640):
comm "nci_dev", pid 3954, jiffies 4295441246
hex dump (first 32 bytes):
6b 6b 6b 6b 00 a4 00 0c 02 e1 03 6b 6b 6b 6b 6b kkkk.......kkkkk
6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
backtrace (crc 7c40cc2a):
kmem_cache_alloc_node_noprof+0x492/0x630
__alloc_skb+0x11e/0x5f0
alloc_skb_with_frags+0xc6/0x8f0
sock_alloc_send_pskb+0x326/0x3f0
nfc_alloc_send_skb+0x94/0x1d0
rawsock_sendmsg+0x162/0x4c0
do_syscall_64+0x117/0xfc0 |
| In the Linux kernel, the following vulnerability has been resolved:
net: sched: avoid qdisc_reset_all_tx_gt() vs dequeue race for lockless qdiscs
When shrinking the number of real tx queues,
netif_set_real_num_tx_queues() calls qdisc_reset_all_tx_gt() to flush
qdiscs for queues which will no longer be used.
qdisc_reset_all_tx_gt() currently serializes qdisc_reset() with
qdisc_lock(). However, for lockless qdiscs, the dequeue path is
serialized by qdisc_run_begin/end() using qdisc->seqlock instead, so
qdisc_reset() can run concurrently with __qdisc_run() and free skbs
while they are still being dequeued, leading to UAF.
This can easily be reproduced on e.g. virtio-net by imposing heavy
traffic while frequently changing the number of queue pairs:
iperf3 -ub0 -c $peer -t 0 &
while :; do
ethtool -L eth0 combined 1
ethtool -L eth0 combined 2
done
With KASAN enabled, this leads to reports like:
BUG: KASAN: slab-use-after-free in __qdisc_run+0x133f/0x1760
...
Call Trace:
<TASK>
...
__qdisc_run+0x133f/0x1760
__dev_queue_xmit+0x248f/0x3550
ip_finish_output2+0xa42/0x2110
ip_output+0x1a7/0x410
ip_send_skb+0x2e6/0x480
udp_send_skb+0xb0a/0x1590
udp_sendmsg+0x13c9/0x1fc0
...
</TASK>
Allocated by task 1270 on cpu 5 at 44.558414s:
...
alloc_skb_with_frags+0x84/0x7c0
sock_alloc_send_pskb+0x69a/0x830
__ip_append_data+0x1b86/0x48c0
ip_make_skb+0x1e8/0x2b0
udp_sendmsg+0x13a6/0x1fc0
...
Freed by task 1306 on cpu 3 at 44.558445s:
...
kmem_cache_free+0x117/0x5e0
pfifo_fast_reset+0x14d/0x580
qdisc_reset+0x9e/0x5f0
netif_set_real_num_tx_queues+0x303/0x840
virtnet_set_channels+0x1bf/0x260 [virtio_net]
ethnl_set_channels+0x684/0xae0
ethnl_default_set_doit+0x31a/0x890
...
Serialize qdisc_reset_all_tx_gt() against the lockless dequeue path by
taking qdisc->seqlock for TCQ_F_NOLOCK qdiscs, matching the
serialization model already used by dev_reset_queue().
Additionally clear QDISC_STATE_NON_EMPTY after reset so the qdisc state
reflects an empty queue, avoiding needless re-scheduling. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: Fix crash when destroying a suspended hardware context
If userspace issues an ioctl to destroy a hardware context that has
already been automatically suspended, the driver may crash because the
mailbox channel pointer is NULL for the suspended context.
Fix this by checking the mailbox channel pointer in aie2_destroy_context()
before accessing it. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix race in cpumap on PREEMPT_RT
On PREEMPT_RT kernels, the per-CPU xdp_bulk_queue (bq) can be accessed
concurrently by multiple preemptible tasks on the same CPU.
The original code assumes bq_enqueue() and __cpu_map_flush() run
atomically with respect to each other on the same CPU, relying on
local_bh_disable() to prevent preemption. However, on PREEMPT_RT,
local_bh_disable() only calls migrate_disable() (when
PREEMPT_RT_NEEDS_BH_LOCK is not set) and does not disable
preemption, which allows CFS scheduling to preempt a task during
bq_flush_to_queue(), enabling another task on the same CPU to enter
bq_enqueue() and operate on the same per-CPU bq concurrently.
This leads to several races:
1. Double __list_del_clearprev(): after bq->count is reset in
bq_flush_to_queue(), a preempting task can call bq_enqueue() ->
bq_flush_to_queue() on the same bq when bq->count reaches
CPU_MAP_BULK_SIZE. Both tasks then call __list_del_clearprev()
on the same bq->flush_node, the second call dereferences the
prev pointer that was already set to NULL by the first.
2. bq->count and bq->q[] races: concurrent bq_enqueue() can corrupt
the packet queue while bq_flush_to_queue() is processing it.
The race between task A (__cpu_map_flush -> bq_flush_to_queue) and
task B (bq_enqueue -> bq_flush_to_queue) on the same CPU:
Task A (xdp_do_flush) Task B (cpu_map_enqueue)
---------------------- ------------------------
bq_flush_to_queue(bq)
spin_lock(&q->producer_lock)
/* flush bq->q[] to ptr_ring */
bq->count = 0
spin_unlock(&q->producer_lock)
bq_enqueue(rcpu, xdpf)
<-- CFS preempts Task A --> bq->q[bq->count++] = xdpf
/* ... more enqueues until full ... */
bq_flush_to_queue(bq)
spin_lock(&q->producer_lock)
/* flush to ptr_ring */
spin_unlock(&q->producer_lock)
__list_del_clearprev(flush_node)
/* sets flush_node.prev = NULL */
<-- Task A resumes -->
__list_del_clearprev(flush_node)
flush_node.prev->next = ...
/* prev is NULL -> kernel oops */
Fix this by adding a local_lock_t to xdp_bulk_queue and acquiring it
in bq_enqueue() and __cpu_map_flush(). These paths already run under
local_bh_disable(), so use local_lock_nested_bh() which on non-RT is
a pure annotation with no overhead, and on PREEMPT_RT provides a
per-CPU sleeping lock that serializes access to the bq.
To reproduce, insert an mdelay(100) between bq->count = 0 and
__list_del_clearprev() in bq_flush_to_queue(), then run reproducer
provided by syzkaller. |
| radare2 prior to 6.1.4 contains a path traversal vulnerability in its project notes handling that allows attackers to read or write files outside the configured project directory by importing a malicious .zrp archive containing a symlinked notes.txt file. Attackers can craft a .zrp archive with a symlinked notes.txt that bypasses directory confinement checks, allowing note operations to follow the symlink and access arbitrary files outside the dir.projects root directory. |
| A vulnerability in SpiceJet’s booking API allows unauthenticated users to query passenger name records (PNRs) without any access controls. Because PNR identifiers follow a predictable pattern, an attacker could systematically enumerate valid records and obtain associated passenger names. This flaw stems from missing authorization checks on an endpoint intended for authenticated profile access. |
| An Improper Input Validation vulnerability in Juniper Networks Junos OS and Junos OS Evolved allows an unauthenticated, adjacent attacker, sending a specific genuine BGP packet in an already established BGP session to reset only that session causing a Denial of Service (DoS).
An attacker repeatedly sending the packet will sustain the Denial of Service (DoS).This issue affects Junos OS:
* 25.2 versions before 25.2R2
This issue does not affect Junos OS versions before 25.2R1.
This issue affects Junos OS Evolved:
* 25.2-EVO versions before 25.2R2-EVO
This issue does not affect Junos OS Evolved versions before 25.2R1-EVO.
eBGP and iBGP are affected.
IPv4 and IPv6 are affected. |
| A logging issue was addressed with improved data redaction. This issue is fixed in iOS 18.7.8 and iPadOS 18.7.8, iOS 26.4.2 and iPadOS 26.4.2. Notifications marked for deletion could be unexpectedly retained on the device. |
| SWUpdate contains an integer underflow vulnerability in the multipart upload parser in mongoose_multipart.c that allows unauthenticated attackers to cause a denial of service by sending a crafted HTTP POST request to /upload with a malformed multipart boundary and controlled TCP stream timing. Attackers can trigger an integer underflow in the mg_http_multipart_continue_wait_for_chunk() function when the buffer length falls within a specific range, causing an out-of-bounds heap read that writes data beyond the allocated receive buffer to a local IPC socket. |
| In the Linux kernel, the following vulnerability has been resolved:
xdp: produce a warning when calculated tailroom is negative
Many ethernet drivers report xdp Rx queue frag size as being the same as
DMA write size. However, the only user of this field, namely
bpf_xdp_frags_increase_tail(), clearly expects a truesize.
Such difference leads to unspecific memory corruption issues under certain
circumstances, e.g. in ixgbevf maximum DMA write size is 3 KB, so when
running xskxceiver's XDP_ADJUST_TAIL_GROW_MULTI_BUFF, 6K packet fully uses
all DMA-writable space in 2 buffers. This would be fine, if only
rxq->frag_size was properly set to 4K, but value of 3K results in a
negative tailroom, because there is a non-zero page offset.
We are supposed to return -EINVAL and be done with it in such case, but due
to tailroom being stored as an unsigned int, it is reported to be somewhere
near UINT_MAX, resulting in a tail being grown, even if the requested
offset is too much (it is around 2K in the abovementioned test). This later
leads to all kinds of unspecific calltraces.
[ 7340.337579] xskxceiver[1440]: segfault at 1da718 ip 00007f4161aeac9d sp 00007f41615a6a00 error 6
[ 7340.338040] xskxceiver[1441]: segfault at 7f410000000b ip 00000000004042b5 sp 00007f415bffecf0 error 4
[ 7340.338179] in libc.so.6[61c9d,7f4161aaf000+160000]
[ 7340.339230] in xskxceiver[42b5,400000+69000]
[ 7340.340300] likely on CPU 6 (core 0, socket 6)
[ 7340.340302] Code: ff ff 01 e9 f4 fe ff ff 0f 1f 44 00 00 4c 39 f0 74 73 31 c0 ba 01 00 00 00 f0 0f b1 17 0f 85 ba 00 00 00 49 8b 87 88 00 00 00 <4c> 89 70 08 eb cc 0f 1f 44 00 00 48 8d bd f0 fe ff ff 89 85 ec fe
[ 7340.340888] likely on CPU 3 (core 0, socket 3)
[ 7340.345088] Code: 00 00 00 ba 00 00 00 00 be 00 00 00 00 89 c7 e8 31 ca ff ff 89 45 ec 8b 45 ec 85 c0 78 07 b8 00 00 00 00 eb 46 e8 0b c8 ff ff <8b> 00 83 f8 69 74 24 e8 ff c7 ff ff 8b 00 83 f8 0b 74 18 e8 f3 c7
[ 7340.404334] Oops: general protection fault, probably for non-canonical address 0x6d255010bdffc: 0000 [#1] SMP NOPTI
[ 7340.405972] CPU: 7 UID: 0 PID: 1439 Comm: xskxceiver Not tainted 6.19.0-rc1+ #21 PREEMPT(lazy)
[ 7340.408006] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.17.0-5.fc42 04/01/2014
[ 7340.409716] RIP: 0010:lookup_swap_cgroup_id+0x44/0x80
[ 7340.410455] Code: 83 f8 1c 73 39 48 ba ff ff ff ff ff ff ff 03 48 8b 04 c5 20 55 fa bd 48 21 d1 48 89 ca 83 e1 01 48 d1 ea c1 e1 04 48 8d 04 90 <8b> 00 48 83 c4 10 d3 e8 c3 cc cc cc cc 31 c0 e9 98 b7 dd 00 48 89
[ 7340.412787] RSP: 0018:ffffcc5c04f7f6d0 EFLAGS: 00010202
[ 7340.413494] RAX: 0006d255010bdffc RBX: ffff891f477895a8 RCX: 0000000000000010
[ 7340.414431] RDX: 0001c17e3fffffff RSI: 00fa070000000000 RDI: 000382fc7fffffff
[ 7340.415354] RBP: 00fa070000000000 R08: ffffcc5c04f7f8f8 R09: ffffcc5c04f7f7d0
[ 7340.416283] R10: ffff891f4c1a7000 R11: ffffcc5c04f7f9c8 R12: ffffcc5c04f7f7d0
[ 7340.417218] R13: 03ffffffffffffff R14: 00fa06fffffffe00 R15: ffff891f47789500
[ 7340.418229] FS: 0000000000000000(0000) GS:ffff891ffdfaa000(0000) knlGS:0000000000000000
[ 7340.419489] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 7340.420286] CR2: 00007f415bfffd58 CR3: 0000000103f03002 CR4: 0000000000772ef0
[ 7340.421237] PKRU: 55555554
[ 7340.421623] Call Trace:
[ 7340.421987] <TASK>
[ 7340.422309] ? softleaf_from_pte+0x77/0xa0
[ 7340.422855] swap_pte_batch+0xa7/0x290
[ 7340.423363] zap_nonpresent_ptes.constprop.0.isra.0+0xd1/0x270
[ 7340.424102] zap_pte_range+0x281/0x580
[ 7340.424607] zap_pmd_range.isra.0+0xc9/0x240
[ 7340.425177] unmap_page_range+0x24d/0x420
[ 7340.425714] unmap_vmas+0xa1/0x180
[ 7340.426185] exit_mmap+0xe1/0x3b0
[ 7340.426644] __mmput+0x41/0x150
[ 7340.427098] exit_mm+0xb1/0x110
[ 7340.427539] do_exit+0x1b2/0x460
[ 7340.427992] do_group_exit+0x2d/0xc0
[ 7340.428477] get_signal+0x79d/0x7e0
[ 7340.428957] arch_do_signal_or_restart+0x34/0x100
[ 7340.429571] exit_to_user_mode_loop+0x8e/0x4c0
[ 7340.430159] do_syscall_64+0x188/
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
udp: Unhash auto-bound connected sk from 4-tuple hash table when disconnected.
Let's say we bind() an UDP socket to the wildcard address with a
non-zero port, connect() it to an address, and disconnect it from
the address.
bind() sets SOCK_BINDPORT_LOCK on sk->sk_userlocks (but not
SOCK_BINDADDR_LOCK), and connect() calls udp_lib_hash4() to put
the socket into the 4-tuple hash table.
Then, __udp_disconnect() calls sk->sk_prot->rehash(sk).
It computes a new hash based on the wildcard address and moves
the socket to a new slot in the 4-tuple hash table, leaving a
garbage in the chain that no packet hits.
Let's remove such a socket from 4-tuple hash table when disconnected.
Note that udp_sk(sk)->udp_portaddr_hash needs to be udpated after
udp_hash4_dec(hslot2) in udp_unhash4(). |
