| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In Juju versions prior to 2.9.57 and 3.6.21, an authorization issue exists in the Controller facade. An authenticated user can call the CloudSpec API method to extract the cloud credentials used to bootstrap the controller. This allows a low-privileged user to access sensitive credentials. This issue is resolved in Juju versions 2.9.57 and 3.6.21. |
| ChurchCRM is an open-source church management system. Prior to 7.1.0, an XSS vulnerability allows attacker-supplied input sent via a the EName and EDesc parameters in EditEventAttendees.php to be rendered in a page without proper output encoding, enabling arbitrary JavaScript execution in victims' browsers. This vulnerability is fixed in 7.1.0. |
| An issue was discovered in OpenStack Keystone 14 through 26 before 26.1.1, 27.0.0, 28.0.0, and 29.0.0. Restricted application credentials can create EC2 credentials. By using a restricted application credential to call the EC2 credential creation API, an authenticated user with only a reader role may obtain an EC2/S3 credential that carries the full set of the parent user's S3 permissions, effectively bypassing the role restrictions imposed on the application credential. Only deployments that use restricted application credentials in combination with the EC2/S3 compatibility API (swift3 / s3api) are affected. |
| An Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Juniper Networks Junos Space allows an attacker to inject script tags in the
list filter field that, when visited by another user, enables the attacker to execute commands with the target's permissions, including an administrator.
This issue affects all versions of Junos Space before 24.1R5 Patch V3. |
| An Improper Check for Unusual or Exceptional Conditions vulnerability in the packet forwarding engine (pfe) of Juniper Networks Junos OS on MX Series allows an unauthenticated, network-based attacker to bypass the configured firewall filter and access the control-plane of the device.
On MX platforms with
MPC10, MPC11, LC4800 or LC9600
line cards, and MX304, firewall filters applied on a loopback interface lo0.n (where n is a non-0 number) don't get executed when lo0.n is in the global VRF / default routing-instance.
An affected configuration would be:
user@host# show configuration interfaces lo0 | display set
set interfaces lo0 unit 1 family inet filter input <filter-name>
where a firewall filter is applied to a non-0 loopback interface, but that loopback interface is not referred to in any routing-instance (RI) configuration, which implies that it's used in the default RI.
The issue can be observed with the CLI command:
user@device> show firewall counter filter <filter_name>
not showing any matches.
This issue affects Junos OS on MX Series:
* all versions before 23.2R2-S6,
* 23.4 versions before 23.4R2-S7,
* 24.2 versions before 24.2R2,
* 24.4 versions before 24.4R2. |
| A Missing Authorization vulnerability in the CLI of Juniper Networks Junos OS and Junos OS Evolved allows a local user with low privileges to read sensitive information.
A local user with low privileges can execute the CLI command 'show mgd' with specific arguments which will expose sensitive information.
This issue affects
Junos OS:
* all versions before 22.4R3-S8,
* 23.2 versions before 23.2R2-S6,
* 23.4 versions before 23.4R2-S6,
* 24.2 versions before 24.2R2-S4,
* 24.4 versions before 24.4R2-S1,
* 25.2 version before 25.2R1-S2, 25.2R2;
Junos OS Evolved:
* all versions before 23.2R2-S6-EVO,
* 23.4 version before 23.4R2-S6-EVO,
* 24.2 version before 24.2R2-S4-EVO,
* 24.4 versions before 24.4R2-S1-EVO,
* 25.2 versions before 25.2R2-EVO. |
| A vulnerability has been found in FoundationAgents MetaGPT up to 0.8.1. This issue affects the function Terminal.run_command in the library metagpt/tools/libs/terminal.py. The manipulation leads to os command injection. Remote exploitation of the attack is possible. The exploit has been disclosed to the public and may be used. The identifier of the patch is d04ffc8dc67903e8b327f78ec121df5e190ffc7b. Applying a patch is the recommended action to fix this issue. |
| Wasmtime is a runtime for WebAssembly. From 25.0.0 to before 36.0.7, 42.0.2, and 43.0.1, Wasmtime with its Winch (baseline) non-default compiler backend may allow properly constructed guest Wasm to access host memory outside of its linear-memory sandbox. This vulnerability requires use of the Winch compiler (-Ccompiler=winch). By default, Wasmtime uses its Cranelift backend, not Winch. With Winch, the same incorrect assumption is present in theory on both aarch64 and x86-64. The aarch64 case has an observed-working proof of concept, while the x86-64 case is theoretical and may not be reachable in practice. This Winch compiler bug can allow the Wasm guest to access memory before or after the linear-memory region, independently of whether pre- or post-guard regions are configured. The accessible range in the initial bug proof-of-concept is up to 32KiB before the start of memory, or ~4GiB after the start of memory, independently of the size of pre- or post-guard regions or the use of explicit or guard-region-based bounds checking. However, the underlying bug assumes a 32-bit memory offset stored in a 64-bit register has its upper bits cleared when it may not, and so closely related variants of the initial proof-of-concept may be able to access truly arbitrary memory in-process. This could result in a host process segmentation fault (DoS), an arbitrary data leak from the host process, or with a write, potentially an arbitrary RCE. This vulnerability is fixed in 36.0.7, 42.0.2, and 43.0.1. |
| Wasmtime is a runtime for WebAssembly. From 25.0.0 to before 36.0.7, 42.0.2, and 43.0.1, Wasmtime's Winch compiler contains a bug where a 64-bit table, part of the memory64 proposal of WebAssembly, incorrectly translated the table.size instruction. This bug could lead to disclosing data on the host's stack to WebAssembly guests. The host's stack can possibly contain sensitive data related to other host-originating operations which is not intended to be disclosed to guests. This bug specifically arose from a mistake where the return value of table.size was statically typed as a 32-bit integer, as opposed to consulting the table's index type to see how large the returned register could be. When combined with details about Wnich's ABI, such as multi-value returns, this can be combined to read stack data from the host, within a guest. This vulnerability is fixed in 36.0.7, 42.0.2, and 43.0.1. |
| Wasmtime is a runtime for WebAssembly. Prior to 24.0.7, 36.0.7, 42.0.2, and 43.0.1, Wasmtime contains a vulnerability where when transcoding a UTF-16 string to the latin1+utf16 component-model encoding it would incorrectly validate the byte length of the input string when performing a bounds check. Specifically the number of code units were checked instead of the byte length, which is twice the size of the code units. This vulnerability can cause the host to read beyond the end of a WebAssembly's linear memory in an attempt to transcode nonexistent bytes. In Wasmtime's default configuration this will read unmapped memory on a guard page, terminating the process with a segfault. Wasmtime can be configured, however, without guard pages which would mean that host memory beyond the end of linear memory may be read and interpreted as UTF-16. A host segfault is a denial-of-service vulnerability in Wasmtime, and possibly being able to read beyond the end of linear memory is additionally a vulnerability. Note that reading beyond the end of linear memory requires nonstandard configuration of Wasmtime, specifically with guard pages disabled. This vulnerability is fixed in 24.0.7, 36.0.7, 42.0.2, and 43.0.1. |
| An Improper Validation of Syntactic Correctness of Input vulnerability in the IPsec library used by kmd and iked of Juniper Networks Junos OS on SRX Series and MX Series allows an unauthenticated, network-based attacker to cause a complete Denial-of-Service (DoS).
If an affected device receives a specifically malformed first ISAKMP packet from the initiator, the kmd/iked process will crash and restart, which momentarily prevents new security associations (SAs) for from being established. Repeated exploitation of this vulnerability causes a complete inability to establish new VPN connections.
This issue affects Junos OS on
SRX Series and MX Series:
* all versions before 22.4R3-S9,
* 23.2 version before 23.2R2-S6,
* 23.4 version before 23.4R2-S7,
* 24.2 versions before 24.2R2-S4,
* 24.4 versions before 24.4R2-S3,
* 25.2 versions before 25.2R1-S2, 25.2R2. |
| Aiven Operator allows you to provision and manage Aiven Services from your Kubernetes cluster. From 0.31.0 to before 0.37.0, a developer with create permission on ClickhouseUser CRDs in their own namespace can exfiltrate secrets from any other namespace — production database credentials, API keys, service tokens — with a single kubectl apply. The operator reads the victim's secret using its ClusterRole and writes the password into a new secret in the attacker's namespace. The operator acts as a confused deputy: its ServiceAccount has cluster-wide secret read/write (aiven-operator-role ClusterRole), and it trusts user-supplied namespace values in spec.connInfoSecretSource.namespace without validation. No admission webhook enforces this boundary — the ServiceUser webhook returns nil, and no ClickhouseUser webhook exists. This vulnerability is fixed in 0.37.0. |
| OpenClaw before 2026.3.22 contains a privilege escalation vulnerability in the Control UI that allows unauthenticated sessions to retain self-declared privileged scopes without device identity verification. Attackers can exploit the device-less allow path in the trusted-proxy mechanism to maintain elevated permissions by declaring arbitrary scopes, bypassing device identity requirements. |
| OpenClaw before 2026.3.25 contains a pre-authentication rate-limit bypass vulnerability in webhook token validation that allows attackers to brute-force weak webhook secrets. The vulnerability exists because invalid webhook tokens are rejected without throttling repeated authentication attempts, enabling attackers to guess weak tokens through rapid successive requests. |
| A 1-byte stack buffer over-read was identified in the MatchDomainName function (src/internal.c) during wildcard hostname validation when the LEFT_MOST_WILDCARD_ONLY flag is active. If a wildcard * exhausts the entire hostname string, the function reads one byte past the buffer without a bounds check, which could cause a crash. |
| A security vulnerability has been detected in Sanluan PublicCMS up to 6.202506.d. This affects the function AbstractFreemarkerView.doRender of the file publiccms-parent/publiccms-core/src/main/java/com/publiccms/common/base/AbstractFreemarkerView.java of the component FreeMarker Template Handler. Such manipulation leads to improper neutralization of special elements used in a template engine. It is possible to launch the attack remotely. The exploit has been disclosed publicly and may be used. The project was informed of the problem early through an issue report but has not responded yet. |
| X.509 date buffer overflow in wolfSSL_X509_notAfter / wolfSSL_X509_notBefore. A buffer overflow may occur when parsing date fields from a crafted X.509 certificate via the compatibility layer API. This is only triggered when calling these two APIs directly from an application, and does not affect TLS or certificate verify operations in wolfSSL. |
| A heap use-after-free exists in wolfSSL's TLS 1.3 post-quantum cryptography (PQC) hybrid KeyShare processing. In the error handling path of TLSX_KeyShare_ProcessPqcHybridClient() in src/tls.c, the inner function TLSX_KeyShare_ProcessPqcClient_ex() frees a KyberKey object upon encountering an error. The caller then invokes TLSX_KeyShare_FreeAll(), which attempts to call ForceZero() on the already-freed KyberKey, resulting in writes of zero bytes over freed heap memory. |
| A vulnerability was determined in Tenda F451 1.0.0.7. This affects the function fromP2pListFilter of the file /goform/P2pListFilter. This manipulation of the argument page causes stack-based buffer overflow. Remote exploitation of the attack is possible. The exploit has been publicly disclosed and may be utilized. |
| A vulnerability was detected in Totolink A7100RU 7.4cu.2313_b20191024. The impacted element is the function setLoginPasswordCfg of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. The manipulation of the argument admpass results in os command injection. It is possible to launch the attack remotely. The exploit is now public and may be used. |
