| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_set_rbtree: validate open interval overlap
Open intervals do not have an end element, in particular an open
interval at the end of the set is hard to validate because of it is
lacking the end element, and interval validation relies on such end
element to perform the checks.
This patch adds a new flag field to struct nft_set_elem, this is not an
issue because this is a temporary object that is allocated in the stack
from the insert/deactivate path. This flag field is used to specify that
this is the last element in this add/delete command.
The last flag is used, in combination with the start element cookie, to
check if there is a partial overlap, eg.
Already exists: 255.255.255.0-255.255.255.254
Add interval: 255.255.255.0-255.255.255.255
~~~~~~~~~~~~~
start element overlap
Basically, the idea is to check for an existing end element in the set
if there is an overlap with an existing start element.
However, the last open interval can come in any position in the add
command, the corner case can get a bit more complicated:
Already exists: 255.255.255.0-255.255.255.254
Add intervals: 255.255.255.0-255.255.255.255,255.255.255.0-255.255.255.254
~~~~~~~~~~~~~
start element overlap
To catch this overlap, annotate that the new start element is a possible
overlap, then report the overlap if the next element is another start
element that confirms that previous element in an open interval at the
end of the set.
For deletions, do not update the start cookie when deleting an open
interval, otherwise this can trigger spurious EEXIST when adding new
elements.
Unfortunately, there is no NFT_SET_ELEM_INTERVAL_OPEN flag which would
make easier to detect open interval overlaps. |
| A vulnerability has been found in Tenda AC15 15.03.05.19. This affects the function formSetCfm of the file /goform/setcfm of the component POST Request Handler. The manipulation of the argument funcpara1 leads to stack-based buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. |
| A vulnerability was found in Totolink LR350 9.3.5u.6369_B20220309. This vulnerability affects the function setWiFiGuestCfg of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument ssid results in buffer overflow. The attack can be launched remotely. The exploit has been made public and could be used. |
| A vulnerability was determined in Wavlink WL-WN579X3-C 231124. This impacts the function sub_4019FC of the file /cgi-bin/firewall.cgi of the component UPNP Handler. Executing a manipulation of the argument UpnpEnabled can lead to stack-based buffer overflow. It is possible to launch the attack remotely. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way. |
| BlueKitchen BTstack versions prior to 1.8.1 contain an out-of-bounds read vulnerability in the AVRCP Controller LIST_PLAYER_APPLICATION_SETTING_ATTRIBUTES and LIST_PLAYER_APPLICATION_SETTING_VALUES handlers that allows attackers to read beyond buffer boundaries. A nearby attacker with a paired Bluetooth Classic connection can send a specially crafted VENDOR_DEPENDENT response with an attacker-controlled count value to trigger an out-of-bounds read from the L2CAP receive buffer, potentially causing a crash on resource-constrained devices. |
| BlueKitchen BTstack versions prior to 1.8.1 contain an out-of-bounds read vulnerability in the AVRCP Controller GET_PLAYER_APPLICATION_SETTING_ATTRIBUTE_TEXT and GET_PLAYER_APPLICATION_SETTING_VALUE_TEXT handlers that allows nearby attackers to read beyond packet boundaries. Attackers can establish a paired Bluetooth Classic connection and send specially crafted VENDOR_DEPENDENT responses to trigger out-of-bounds reads, causing information disclosure and potential crashes on affected devices. |
| PJSIP is a free and open source multimedia communication library written in C. Prior to version 2.17, a heap out-of-bounds read vulnerability exists in PJSIP's VP9 RTP unpacketizer that occurs when parsing crafted VP9 Scalability Structure (SS) data. Insufficient bounds checking on the payload descriptor length may cause reads beyond the allocated RTP payload buffer. This issue has been patched in version 2.17. A workaround for this issue involves disabling VP9 codec if not needed. |
| An issue was discovered in Mbed TLS 3.x before 3.6.6. An out-of-bounds read vulnerability in mbedtls_ccm_finish() in library/ccm.c allows attackers to obtain adjacent CCM context data via invocation of the multipart CCM API with an oversized tag_len parameter. This is caused by missing validation of the tag_len parameter against the size of the internal 16-byte authentication buffer. The issue affects the public multipart CCM API in Mbed TLS 3.x, where mbedtls_ccm_finish() can be invoked directly by applications. In Mbed TLS 4.x versions prior to the fix, the same missing validation exists in the internal implementation; however, the function is not exposed as part of the public API. Exploitation requires application-level invocation of the multipart CCM API. |
| A remote attacker can supply a short X-Wing HPKE encapsulated key and trigger an out-of-bounds read in the C decapsulation path, potentially causing a crash or memory disclosure depending on runtime protections. This issue is fixed in swift-crypto version 4.3.1. |
| In the Linux kernel, the following vulnerability has been resolved:
net: usb: cdc_ncm: add ndpoffset to NDP16 nframes bounds check
cdc_ncm_rx_verify_ndp16() validates that the NDP header and its DPE
entries fit within the skb. The first check correctly accounts for
ndpoffset:
if ((ndpoffset + sizeof(struct usb_cdc_ncm_ndp16)) > skb_in->len)
but the second check omits it:
if ((sizeof(struct usb_cdc_ncm_ndp16) +
ret * (sizeof(struct usb_cdc_ncm_dpe16))) > skb_in->len)
This validates the DPE array size against the total skb length as if
the NDP were at offset 0, rather than at ndpoffset. When the NDP is
placed near the end of the NTB (large wNdpIndex), the DPE entries can
extend past the skb data buffer even though the check passes.
cdc_ncm_rx_fixup() then reads out-of-bounds memory when iterating
the DPE array.
Add ndpoffset to the nframes bounds check and use struct_size_t() to
express the NDP-plus-DPE-array size more clearly. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_conntrack_h323: check for zero length in DecodeQ931()
In DecodeQ931(), the UserUserIE code path reads a 16-bit length from
the packet, then decrements it by 1 to skip the protocol discriminator
byte before passing it to DecodeH323_UserInformation(). If the encoded
length is 0, the decrement wraps to -1, which is then passed as a
large value to the decoder, leading to an out-of-bounds read.
Add a check to ensure len is positive after the decrement. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_conntrack_h323: fix OOB read in decode_int() CONS case
In decode_int(), the CONS case calls get_bits(bs, 2) to read a length
value, then calls get_uint(bs, len) without checking that len bytes
remain in the buffer. The existing boundary check only validates the
2 bits for get_bits(), not the subsequent 1-4 bytes that get_uint()
reads. This allows a malformed H.323/RAS packet to cause a 1-4 byte
slab-out-of-bounds read.
Add a boundary check for len bytes after get_bits() and before
get_uint(). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe: Open-code GGTT MMIO access protection
GGTT MMIO access is currently protected by hotplug (drm_dev_enter),
which works correctly when the driver loads successfully and is later
unbound or unloaded. However, if driver load fails, this protection is
insufficient because drm_dev_unplug() is never called.
Additionally, devm release functions cannot guarantee that all BOs with
GGTT mappings are destroyed before the GGTT MMIO region is removed, as
some BOs may be freed asynchronously by worker threads.
To address this, introduce an open-coded flag, protected by the GGTT
lock, that guards GGTT MMIO access. The flag is cleared during the
dev_fini_ggtt devm release function to ensure MMIO access is disabled
once teardown begins.
(cherry picked from commit 4f3a998a173b4325c2efd90bdadc6ccd3ad9a431) |
| In the Linux kernel, the following vulnerability has been resolved:
bnxt_en: fix OOB access in DBG_BUF_PRODUCER async event handler
The ASYNC_EVENT_CMPL_EVENT_ID_DBG_BUF_PRODUCER handler in
bnxt_async_event_process() uses a firmware-supplied 'type' field
directly as an index into bp->bs_trace[] without bounds validation.
The 'type' field is a 16-bit value extracted from DMA-mapped completion
ring memory that the NIC writes directly to host RAM. A malicious or
compromised NIC can supply any value from 0 to 65535, causing an
out-of-bounds access into kernel heap memory.
The bnxt_bs_trace_check_wrap() call then dereferences bs_trace->magic_byte
and writes to bs_trace->last_offset and bs_trace->wrapped, leading to
kernel memory corruption or a crash.
Fix by adding a bounds check and defining BNXT_TRACE_MAX as
DBG_LOG_BUFFER_FLUSH_REQ_TYPE_ERR_QPC_TRACE + 1 to cover all currently
defined firmware trace types (0x0 through 0xc). |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: fix heap overflow in NFSv4.0 LOCK replay cache
The NFSv4.0 replay cache uses a fixed 112-byte inline buffer
(rp_ibuf[NFSD4_REPLAY_ISIZE]) to store encoded operation responses.
This size was calculated based on OPEN responses and does not account
for LOCK denied responses, which include the conflicting lock owner as
a variable-length field up to 1024 bytes (NFS4_OPAQUE_LIMIT).
When a LOCK operation is denied due to a conflict with an existing lock
that has a large owner, nfsd4_encode_operation() copies the full encoded
response into the undersized replay buffer via read_bytes_from_xdr_buf()
with no bounds check. This results in a slab-out-of-bounds write of up
to 944 bytes past the end of the buffer, corrupting adjacent heap memory.
This can be triggered remotely by an unauthenticated attacker with two
cooperating NFSv4.0 clients: one sets a lock with a large owner string,
then the other requests a conflicting lock to provoke the denial.
We could fix this by increasing NFSD4_REPLAY_ISIZE to allow for a full
opaque, but that would increase the size of every stateowner, when most
lockowners are not that large.
Instead, fix this by checking the encoded response length against
NFSD4_REPLAY_ISIZE before copying into the replay buffer. If the
response is too large, set rp_buflen to 0 to skip caching the replay
payload. The status is still cached, and the client already received the
correct response on the original request. |
| A vulnerability was found in NASA cFS up to 7.0.0. This affects the function CFE_MSG_GetSize of the file apps/to_lab/fsw/src/to_lab_passthru_encode.c of the component CCSDS Packet Header Handler. Performing a manipulation results in heap-based buffer overflow. The attacker must have access to the local network to execute the attack. The project was informed of the problem early through an issue report but has not responded yet. |
| An issue was discovered in Mbed TLS 3.5.x and 3.6.x through 3.6.5 and TF-PSA-Crypto 1.0. There is a lack of contributory behavior in FFDH due to improper input validation. Using finite-field Diffie-Hellman, the other party can force the shared secret into a small set of values (lack of contributory behavior). This is a problem for protocols that depend on contributory behavior (which is not the case for TLS). The attack can be carried by the peer, or depending on the protocol by an active network attacker (person in the middle). |
| A flaw has been found in LibRaw up to 0.22.0. This affects the function LibRaw::nikon_load_padded_packed_raw of the file src/decoders/decoders_libraw.cpp of the component TIFF/NEF. Executing a manipulation of the argument load_flags/raw_width can lead to out-of-bounds read. It is possible to launch the attack remotely. The exploit has been published and may be used. Upgrading to version 0.22.1 mitigates this issue. This patch is called b8397cd45657b84e88bd1202528d1764265f185c. It is advisable to upgrade the affected component. |
| OpenEXR provides the specification and reference implementation of the EXR file format, an image storage format for the motion picture industry. From version 3.4.0 to before version 3.4.7, an attacker providing a crafted .exr file with HTJ2K compression and a channel width of 32768 can write controlled data beyond the output heap buffer in any application that decodes EXR images. The write primitive is 2 bytes per overflow iteration or 4 bytes (by another path), repeating for each additional pixel past the overflow point. In this context, a heap write overflow can lead to remote code execution on systems. This issue has been patched in version 3.4.7. |
| A vulnerability was found in D-Link DIR-513 1.10. This affects the function formEasySetPassword of the file /goform/formEasySetPassword of the component Web Service. The manipulation of the argument curTime results in stack-based buffer overflow. The attack may be performed from remote. The exploit has been made public and could be used. This vulnerability only affects products that are no longer supported by the maintainer. |
