| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| ZITADEL is an open source identity management platform. Starting in version 2.31.0 and prior to versions 3.4.7 and 4.11.0, opaque OIDC access tokens in the v2 format truncated to 80 characters are still considered valid. Zitadel uses a symmetric AES encryption for opaque tokens. The cleartext payload is a concatenation of a couple of identifiers, such as a token ID and user ID. Internally Zitadel has 2 different versions of token payloads. v1 tokens are no longer created, but are still verified as to not invalidate existing session after upgrade. The cleartext payload has a format of `<token_id>:<user_id>`. v2 tokens distinguished further where the `token_id` is of the format `v2_<oidc_session_id>-at_<access_token_id>`. V1 token authZ/N session data is retrieved from the database using the (simple) `token_id` value and `user_id` value. The `user_id` (called `subject` in some parts of our code) was used as being the trusted user ID. V2 token authZ/N session data is retrieved from the database using the `oidc_session_id` and `access_token_id` and in this case the `user_id` from the token is ignored and taken from the session data in the database. By truncating the token to 80 chars, the user_id is now missing from the cleartext of the v2 token. The back-end still accepts this for above reasons. This issue is not considered exploitable, but may look awkward when reproduced. The patch in versions 4.11.0 and 3.4.7 resolves the issue by verifying the `user_id` from the token against the session data from the database. No known workarounds are available. |
| FLIR thermal traffic cameras contain an unauthenticated vulnerability that allows remote attackers to access live video streams without credentials. Attackers can directly retrieve video streams by accessing specific endpoints like /live.mjpeg, /snapshot.jpg, and RTSP streaming URLs without authentication. |
| Tattile Smart+, Vega, and Basic device families firmware versions 1.181.5 and prior expose RTSP streams without requiring authentication. A remote attacker can connect to the RTSP service and access live video/audio streams without valid credentials, resulting in unauthorized disclosure of surveillance data. |
| JUNG Smart Visu Server 1.1.1050 contains a denial of service vulnerability that allows unauthenticated attackers to remotely shutdown or reboot the server. Attackers can send a single POST request to trigger the server reboot without requiring any authentication. |
| VideoLAN VLC for Android prior to version 3.7.0 contains an authentication bypass in the Remote Access Server feature due to missing or insufficient rate limiting on one-time password (OTP) verification. The Remote Access Server uses a 4-digit OTP and does not enforce effective throttling or lockout within the OTP validity window, allowing an attacker with network reachability to the server to repeatedly attempt OTP verification until a valid user_session cookie is issued. Successful exploitation results in unauthorized access to the Remote Access interface, limited to media files explicitly shared by the VLC for Android user. |
| Shenzhen Tenda W30E V2 firmware versions up to and including V16.01.0.19(5037) do not enforce rate limiting or account lockout mechanisms on authentication endpoints. This allows attackers to perform unrestricted brute-force attempts against administrative credentials. |
| SmarterTools SmarterMail versions prior to build 9511 contain an unauthenticated remote code execution vulnerability in the ConnectToHub API method. The attacker could point the SmarterMail to the malicious HTTP server, which serves the malicious OS command. This command will be executed by the vulnerable application. |
| Multiple D-Link DSL/DIR/DNS devices contain an authentication bypass and improper access control vulnerability in the dnscfg.cgi endpoint that allows an unauthenticated attacker to access DNS configuration functionality. By directly requesting this endpoint, an attacker can modify the device’s DNS settings without valid credentials, enabling DNS hijacking (“DNSChanger”) attacks that redirect user traffic to attacker-controlled infrastructure. In 2019, D-Link reported that this behavior was leveraged by the "GhostDNS" malware ecosystem targeting consumer and carrier routers. All impacted products were subsequently designated end-of-life/end-of-service, and no longer receive security updates. Exploitation evidence was observed by the Shadowserver Foundation on 2025-11-27 (UTC). |
| A security vulnerability has been detected in Chia Blockchain 2.1.0. This issue affects the function _authenticate of the file rpc_server_base.py of the component RPC Credential Handler. The manipulation leads to improper authentication. The attack is possible to be carried out remotely. The attack is considered to have high complexity. The exploitability is assessed as difficult. The exploit has been disclosed publicly and may be used. The vendor was informed early via email. A separate report via bugbounty was rejected with the reason "This is by design. The user is responsible for host security". |
| A flaw has been found in Chia Blockchain 2.1.0. The affected element is the function send_transaction/get_private_key of the component RPC Server Master Passphrase Handler. This manipulation causes missing authentication. The attack can only be executed locally. The attack's complexity is rated as high. The exploitability is described as difficult. The exploit has been published and may be used. The vendor was informed early via email. A separate report via bugbounty was rejected with the reason "This is by design. The user is responsible for host security". |
| The Labkotec LID-3300IP has an existing vulnerability in the ice detector software that enables an unauthenticated attacker to alter device parameters and run operational commands when specially crafted packets are sent to the device. |
| IBM DevOps Plan 3.0.0 through 3.0.5 uses an inadequate account lockout setting that could allow a remote attacker to brute force account credentials. |
| SOUND4 IMPACT/FIRST/PULSE/Eco versions 2.x and below contain an unauthenticated vulnerability that allows remote attackers to access live radio stream information through webplay or ffmpeg scripts. Attackers can exploit the vulnerability by calling specific web scripts to disclose radio stream details without requiring authentication. |
| calibre is a cross-platform e-book manager for viewing, converting, editing, and cataloging e-books. Prior to version 9.4.0, the calibre Content Server's brute-force protection mechanism uses a ban key derived from both `remote_addr` and the `X-Forwarded-For` header. Since the `X-Forwarded-For` header is read directly from the HTTP request without any validation or trusted-proxy configuration, an attacker can bypass IP-based bans by simply changing or adding this header, rendering the brute-force protection completely ineffective. This is particularly dangerous for calibre servers exposed to the internet, where brute-force protection is the primary defense against credential stuffing and password guessing attacks. Version 9.4.0 contains a fix for the issue. |
| Indico is an event management system that uses Flask-Multipass, a multi-backend authentication system for Flask. In versions prior to 3.3.11, the API endpoint used to manage event series is missing an access check, allowing unauthenticated/unauthorized access to this endpoint. The impact of this is limited to getting the metadata (title, category chain, start/end date) for events in an existing series, deleting an existing event series, and modifying an existing event series. This vulnerability does NOT allow unauthorized access to events (beyond the basic metadata mentioned above), nor any kind of tampering with user-visible data in events. Version 3.3.11 fixes the issue. As a workaround, use the webserver to restrict access to the series management API endpoint. |
| SODOLA SL902-SWTGW124AS firmware versions through 200.1.20 contain an authentication bypass vulnerability that allows remote attackers to perform unlimited login attempts against the management interface. Attackers can conduct online password guessing attacks without account lockout or rate limiting restrictions to gain unauthorized access to the device management interface. |
| The vulnerability enables an attacker to fully bypass authentication in CGM CLININET and gain access to any active user account by supplying only the username, without requiring a password or any other credentials. Obtaining a session ID is sufficient for session takeover and grants access to the system with the privileges of the targeted user. |
| Umbraco Engage is a business intelligence platform. A vulnerability has been identified in Umbraco Engage prior to versions 16.2.1 and 17.1.1 where certain API endpoints are exposed without enforcing authentication or authorization checks. The affected endpoints can be accessed directly over the network without requiring a valid session or user credentials. By supplying a user-controlled identifier parameter (e.g., ?id=), an attacker can retrieve sensitive data associated with arbitrary records. Because no access control validation is performed, the endpoints are vulnerable to enumeration attacks, allowing attackers to iterate over identifiers and extract data at scale. An unauthenticated attacker can retrieve sensitive Engage-related data by directly querying the affected API endpoints. The vulnerability allows arbitrary record access through predictable or enumerable identifiers. The confidentiality impact is considered high. No direct integrity or availability impact has been identified. The scope of exposed data depends on the deployment but may include analytics data, tracking data, customer-related information, or other Engage-managed content. The vulnerability affects both v16 and v17. Patches have already been released. Users are advised to update to 16.2.1 or 17.1.1. No known workarounds are available. |
| Podman Desktop is a graphical tool for developing on containers and Kubernetes. A critical authentication bypass vulnerability in Podman Desktop prior to version 1.25.1 allows any extension to completely circumvent permission checks and gain unauthorized access to all authentication sessions. The `isAccessAllowed()` function unconditionally returns `true`, enabling malicious extensions to impersonate any user, hijack authentication sessions, and access sensitive resources without authorization. This vulnerability affects all versions of Podman Desktop. Version 1.25.1 contains a patch for the issue. |
| Binardat 10G08-0800GSM network switch firmware version V300SP10260209 and prior do not implement rate limiting or account lockout on failed login attempts, enabling brute-force attacks against user credentials. |
