| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| NVIDIA Triton Inference Server contains a vulnerability where an attacker may cause internal state corruption. A successful exploit of this vulnerability may lead to a denial of service. |
| IBM WebSphere Application Server - Liberty 17.0.0.3 through 26.0.0.3 IBM WebSphere Application Server Liberty is affected by privilege escalation. A privileged user could gain additional access to the application server. |
| This affects all versions of package github.com/nats-io/nats-server/server. Untrusted accounts are able to crash the server using configs that represent a service export/import cycles. Disclaimer from the maintainers: Running a NATS service which is exposed to untrusted users presents a heightened risk. Any remote execution flaw or equivalent seriousness, or denial-of-service by unauthenticated users, will lead to prompt releases by the NATS maintainers. Fixes for denial of service issues with no threat of remote execution, when limited to account holders, are likely to just be committed to the main development branch with no special attention. Those who are running such services are encouraged to build regularly from git. |
| In Modem, there is a possible system crash due to improper input validation. This could lead to remote denial of service, if a UE has connected to a rogue base station controlled by the attacker, with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: MOLY00693083; Issue ID: MSV-5928. |
| Mattermost Plugins versions <=2.0.3.0 fail to properly mask sensitive configuration values which allows an attacker with access to support packets to obtain original plugin settings via exported configuration data. Mattermost Advisory ID: MMSA-2026-00606 |
| free5GC is an open source 5G core network. free5GC NRF prior to version 1.4.2 has an Improper Input Validation vulnerability leading to Denial of Service. All deployments of free5GC using the NRF discovery service are affected. The `EncodeGroupId` function attempts to access array indices [0], [1], [2] without validating the length of the split data. When the parameter contains insufficient separator characters, the code panics with "index out of range". A remote attacker can cause the NRF service to panic and crash by sending a crafted HTTP GET request with a malformed `group-id-list` parameter. This results in complete denial of service for the NRF discovery service. free5GC NRF version 1.4.2 fixes the issue. There is no direct workaround at the application level. The recommendation is to apply the provided patch or restrict access to the NRF API to trusted sources only. |
| Vikunja is an open-source self-hosted task management platform. Starting in version 0.13 and prior to version 2.2.1, any user that has enabled 2FA can have their TOTP reused during the standard 30 second validity window. Version 2.2.1 patches the issue. |
| Vikunja is an open-source self-hosted task management platform. Prior to version 2.2.1, the `GET /api/v1/projects/:project/webhooks` endpoint returns webhook BasicAuth credentials (`basic_auth_user` and `basic_auth_password`) in plaintext to any user with read access to the project. While the existing code correctly masks the HMAC `secret` field, the BasicAuth fields added in a later migration were not given the same treatment. This allows read-only collaborators to steal credentials intended for authenticating against external webhook receivers. Version 2.2.1 patches the issue. |
| langflow v1.0.12 was discovered to contain a remote code execution (RCE) vulnerability via the PythonCodeTool component. |
| AppleTalk and RELOAD Framing dissector crash in Wireshark 4.4.0 and 4.2.0 to 4.2.7 allows denial of service via packet injection or crafted capture file |
| CWE-20 vulnerability in MolotovCherry Android-ImageMagick7.This issue affects Android-ImageMagick7: before 7.1.2-11. |
| pyLoad is a free and open-source download manager written in Python. From version 0.4.0 to before version 0.5.0b3.dev97, the set_config_value() API endpoint allows users with the non-admin SETTINGS permission to modify any configuration option without restriction. The reconnect.script config option controls a file path that is passed directly to subprocess.run() in the thread manager's reconnect logic. A SETTINGS user can set this to any executable file on the system, achieving Remote Code Execution. The only validation in set_config_value() is a hardcoded check for general.storage_folder — all other security-critical settings including reconnect.script are writable without any allowlist or path restriction. This issue has been patched in version 0.5.0b3.dev97. |
| A flaw was found in the Red Hat Ansible Automation Platform, Event-Driven Ansible (EDA) Event Stream API. This vulnerability allows exposure of sensitive client credentials and internal infrastructure headers via the test_headers field when an event stream is in test mode. The possible outcome includes leakage of internal infrastructure details, accidental disclosure of user or system credentials, privilege escalation if high-value tokens are exposed, and persistent sensitive data exposure to all users with read access on the event stream. |
| An issue in Free5GC v.4.2.0 and before allows a remote attacker to cause a denial of service via the function HandleAuthenticationFailure of the component AMF |
| A flaw was found in the Red Hat Ansible Automation Platform, Event-Driven Ansible (EDA) Event Streams. This vulnerability allows an authenticated user to gain access to sensitive internal infrastructure headers (such as X-Trusted-Proxy and X-Envoy-*) and event stream URLs via crafted requests and job templates. By exfiltrating these headers, an attacker could spoof trusted requests, escalate privileges, or perform malicious event injection. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: seqiv - Do not use req->iv after crypto_aead_encrypt
As soon as crypto_aead_encrypt is called, the underlying request
may be freed by an asynchronous completion. Thus dereferencing
req->iv after it returns is invalid.
Instead of checking req->iv against info, create a new variable
unaligned_info and use it for that purpose instead. |
| In the Linux kernel, the following vulnerability has been resolved:
smc91x: fix broken irq-context in PREEMPT_RT
When smc91x.c is built with PREEMPT_RT, the following splat occurs
in FVP_RevC:
[ 13.055000] smc91x LNRO0003:00 eth0: link up, 10Mbps, half-duplex, lpa 0x0000
[ 13.062137] BUG: workqueue leaked atomic, lock or RCU: kworker/2:1[106]
[ 13.062137] preempt=0x00000000 lock=0->0 RCU=0->1 workfn=mld_ifc_work
[ 13.062266] C
** replaying previous printk message **
[ 13.062266] CPU: 2 UID: 0 PID: 106 Comm: kworker/2:1 Not tainted 6.18.0-dirty #179 PREEMPT_{RT,(full)}
[ 13.062353] Hardware name: , BIOS
[ 13.062382] Workqueue: mld mld_ifc_work
[ 13.062469] Call trace:
[ 13.062494] show_stack+0x24/0x40 (C)
[ 13.062602] __dump_stack+0x28/0x48
[ 13.062710] dump_stack_lvl+0x7c/0xb0
[ 13.062818] dump_stack+0x18/0x34
[ 13.062926] process_scheduled_works+0x294/0x450
[ 13.063043] worker_thread+0x260/0x3d8
[ 13.063124] kthread+0x1c4/0x228
[ 13.063235] ret_from_fork+0x10/0x20
This happens because smc_special_trylock() disables IRQs even on PREEMPT_RT,
but smc_special_unlock() does not restore IRQs on PREEMPT_RT.
The reason is that smc_special_unlock() calls spin_unlock_irqrestore(),
and rcu_read_unlock_bh() in __dev_queue_xmit() cannot invoke
rcu_read_unlock() through __local_bh_enable_ip() when current->softirq_disable_cnt becomes zero.
To address this issue, replace smc_special_trylock() with spin_trylock_irqsave(). |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/64s/slb: Fix SLB multihit issue during SLB preload
On systems using the hash MMU, there is a software SLB preload cache that
mirrors the entries loaded into the hardware SLB buffer. This preload
cache is subject to periodic eviction — typically after every 256 context
switches — to remove old entry.
To optimize performance, the kernel skips switch_mmu_context() in
switch_mm_irqs_off() when the prev and next mm_struct are the same.
However, on hash MMU systems, this can lead to inconsistencies between
the hardware SLB and the software preload cache.
If an SLB entry for a process is evicted from the software cache on one
CPU, and the same process later runs on another CPU without executing
switch_mmu_context(), the hardware SLB may retain stale entries. If the
kernel then attempts to reload that entry, it can trigger an SLB
multi-hit error.
The following timeline shows how stale SLB entries are created and can
cause a multi-hit error when a process moves between CPUs without a
MMU context switch.
CPU 0 CPU 1
----- -----
Process P
exec swapper/1
load_elf_binary
begin_new_exc
activate_mm
switch_mm_irqs_off
switch_mmu_context
switch_slb
/*
* This invalidates all
* the entries in the HW
* and setup the new HW
* SLB entries as per the
* preload cache.
*/
context_switch
sched_migrate_task migrates process P to cpu-1
Process swapper/0 context switch (to process P)
(uses mm_struct of Process P) switch_mm_irqs_off()
switch_slb
load_slb++
/*
* load_slb becomes 0 here
* and we evict an entry from
* the preload cache with
* preload_age(). We still
* keep HW SLB and preload
* cache in sync, that is
* because all HW SLB entries
* anyways gets evicted in
* switch_slb during SLBIA.
* We then only add those
* entries back in HW SLB,
* which are currently
* present in preload_cache
* (after eviction).
*/
load_elf_binary continues...
setup_new_exec()
slb_setup_new_exec()
sched_switch event
sched_migrate_task migrates
process P to cpu-0
context_switch from swapper/0 to Process P
switch_mm_irqs_off()
/*
* Since both prev and next mm struct are same we don't call
* switch_mmu_context(). This will cause the HW SLB and SW preload
* cache to go out of sync in preload_new_slb_context. Because there
* was an SLB entry which was evicted from both HW and preload cache
* on cpu-1. Now later in preload_new_slb_context(), when we will try
* to add the same preload entry again, we will add this to the SW
* preload cache and then will add it to the HW SLB. Since on cpu-0
* this entry was never invalidated, hence adding this entry to the HW
* SLB will cause a SLB multi-hit error.
*/
load_elf_binary cont
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
counter: interrupt-cnt: Drop IRQF_NO_THREAD flag
An IRQ handler can either be IRQF_NO_THREAD or acquire spinlock_t, as
CONFIG_PROVE_RAW_LOCK_NESTING warns:
=============================
[ BUG: Invalid wait context ]
6.18.0-rc1+git... #1
-----------------------------
some-user-space-process/1251 is trying to lock:
(&counter->events_list_lock){....}-{3:3}, at: counter_push_event [counter]
other info that might help us debug this:
context-{2:2}
no locks held by some-user-space-process/....
stack backtrace:
CPU: 0 UID: 0 PID: 1251 Comm: some-user-space-process 6.18.0-rc1+git... #1 PREEMPT
Call trace:
show_stack (C)
dump_stack_lvl
dump_stack
__lock_acquire
lock_acquire
_raw_spin_lock_irqsave
counter_push_event [counter]
interrupt_cnt_isr [interrupt_cnt]
__handle_irq_event_percpu
handle_irq_event
handle_simple_irq
handle_irq_desc
generic_handle_domain_irq
gpio_irq_handler
handle_irq_desc
generic_handle_domain_irq
gic_handle_irq
call_on_irq_stack
do_interrupt_handler
el0_interrupt
__el0_irq_handler_common
el0t_64_irq_handler
el0t_64_irq
... and Sebastian correctly points out. Remove IRQF_NO_THREAD as an
alternative to switching to raw_spinlock_t, because the latter would limit
all potential nested locks to raw_spinlock_t only. |
| In the Linux kernel, the following vulnerability has been resolved:
can: j1939: make j1939_session_activate() fail if device is no longer registered
syzbot is still reporting
unregister_netdevice: waiting for vcan0 to become free. Usage count = 2
even after commit 93a27b5891b8 ("can: j1939: add missing calls in
NETDEV_UNREGISTER notification handler") was added. A debug printk() patch
found that j1939_session_activate() can succeed even after
j1939_cancel_active_session() from j1939_netdev_notify(NETDEV_UNREGISTER)
has completed.
Since j1939_cancel_active_session() is processed with the session list lock
held, checking ndev->reg_state in j1939_session_activate() with the session
list lock held can reliably close the race window. |
