| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/pf: Fix use-after-free in migration restore
When an error is returned from xe_sriov_pf_migration_restore_produce(),
the data pointer is not set to NULL, which can trigger use-after-free
in subsequent .write() calls.
Set the pointer to NULL upon error to fix the problem.
(cherry picked from commit 4f53d8c6d23527d734fe3531d08e15cb170a0819) |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/irdma: Harden depth calculation functions
An issue was exposed where OS can pass in U32_MAX for SQ/RQ/SRQ size.
This can cause integer overflow and truncation of SQ/RQ/SRQ depth
returning a success when it should have failed.
Harden the functions to do all depth calculations and boundary
checking in u64 sizes. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/irdma: Initialize free_qp completion before using it
In irdma_create_qp, if ib_copy_to_udata fails, it will call
irdma_destroy_qp to clean up which will attempt to wait on
the free_qp completion, which is not initialized yet. Fix this
by initializing the completion before the ib_copy_to_udata call. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/efa: Fix use of completion ctx after free
On admin queue completion handling, if the admin command completed with
error we print data from the completion context. The issue is that we
already freed the completion context in polling/interrupts handler which
means we print data from context in an unknown state (it might be
already used again).
Change the admin submission flow so alloc/dealloc of the context will be
symmetric and dealloc will be called after any potential use of the
context. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_conntrack_expect: skip expectations in other netns via proc
Skip expectations that do not reside in this netns.
Similar to e77e6ff502ea ("netfilter: conntrack: do not dump other netns's
conntrack entries via proc"). |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btusb: clamp SCO altsetting table indices
btusb_work() maps the number of active SCO links to USB alternate
settings through a three-entry lookup table when CVSD traffic uses
transparent voice settings. The lookup currently indexes alts[] with
data->sco_num - 1 without first constraining sco_num to the number of
available table entries.
While the table only defines alternate settings for up to three SCO
links, data->sco_num comes from hci_conn_num() and is used directly.
Cap the lookup to the last table entry before indexing it so the
driver keeps selecting the highest supported alternate setting without
reading past alts[]. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: Fix deadlock in l2cap_conn_del()
l2cap_conn_del() calls cancel_delayed_work_sync() for both info_timer
and id_addr_timer while holding conn->lock. However, the work functions
l2cap_info_timeout() and l2cap_conn_update_id_addr() both acquire
conn->lock, creating a potential AB-BA deadlock if the work is already
executing when l2cap_conn_del() takes the lock.
Move the work cancellations before acquiring conn->lock and use
disable_delayed_work_sync() to additionally prevent the works from
being rearmed after cancellation, consistent with the pattern used in
hci_conn_del(). |
| In the Linux kernel, the following vulnerability has been resolved:
net: ti: icssg-prueth: fix use-after-free of CPPI descriptor in RX path
cppi5_hdesc_get_psdata() returns a pointer into the CPPI descriptor.
In both emac_rx_packet() and emac_rx_packet_zc(), the descriptor is
freed via k3_cppi_desc_pool_free() before the psdata pointer is used
by emac_rx_timestamp(), which dereferences psdata[0] and psdata[1].
This constitutes a use-after-free on every received packet that goes
through the timestamp path.
Defer the descriptor free until after all accesses through the psdata
pointer are complete. For emac_rx_packet(), move the free into the
requeue label so both early-exit and success paths free the descriptor
after all accesses are done. For emac_rx_packet_zc(), move the free to
the end of the loop body after emac_dispatch_skb_zc() (which calls
emac_rx_timestamp()) has returned. |
| In the Linux kernel, the following vulnerability has been resolved:
udp: Fix wildcard bind conflict check when using hash2
When binding a udp_sock to a local address and port, UDP uses
two hashes (udptable->hash and udptable->hash2) for collision
detection. The current code switches to "hash2" when
hslot->count > 10.
"hash2" is keyed by local address and local port.
"hash" is keyed by local port only.
The issue can be shown in the following bind sequence (pseudo code):
bind(fd1, "[fd00::1]:8888")
bind(fd2, "[fd00::2]:8888")
bind(fd3, "[fd00::3]:8888")
bind(fd4, "[fd00::4]:8888")
bind(fd5, "[fd00::5]:8888")
bind(fd6, "[fd00::6]:8888")
bind(fd7, "[fd00::7]:8888")
bind(fd8, "[fd00::8]:8888")
bind(fd9, "[fd00::9]:8888")
bind(fd10, "[fd00::10]:8888")
/* Correctly return -EADDRINUSE because "hash" is used
* instead of "hash2". udp_lib_lport_inuse() detects the
* conflict.
*/
bind(fail_fd, "[::]:8888")
/* After one more socket is bound to "[fd00::11]:8888",
* hslot->count exceeds 10 and "hash2" is used instead.
*/
bind(fd11, "[fd00::11]:8888")
bind(fail_fd, "[::]:8888") /* succeeds unexpectedly */
The same issue applies to the IPv4 wildcard address "0.0.0.0"
and the IPv4-mapped wildcard address "::ffff:0.0.0.0". For
example, if there are existing sockets bound to
"192.168.1.[1-11]:8888", then binding "0.0.0.0:8888" or
"[::ffff:0.0.0.0]:8888" can also miss the conflict when
hslot->count > 10.
TCP inet_csk_get_port() already has the correct check in
inet_use_bhash2_on_bind(). Rename it to
inet_use_hash2_on_bind() and move it to inet_hashtables.h
so udp.c can reuse it in this fix. |
| In the Linux kernel, the following vulnerability has been resolved:
net: fix fanout UAF in packet_release() via NETDEV_UP race
`packet_release()` has a race window where `NETDEV_UP` can re-register a
socket into a fanout group's `arr[]` array. The re-registration is not
cleaned up by `fanout_release()`, leaving a dangling pointer in the fanout
array.
`packet_release()` does NOT zero `po->num` in its `bind_lock` section.
After releasing `bind_lock`, `po->num` is still non-zero and `po->ifindex`
still matches the bound device. A concurrent `packet_notifier(NETDEV_UP)`
that already found the socket in `sklist` can re-register the hook.
For fanout sockets, this re-registration calls `__fanout_link(sk, po)`
which adds the socket back into `f->arr[]` and increments `f->num_members`,
but does NOT increment `f->sk_ref`.
The fix sets `po->num` to zero in `packet_release` while `bind_lock` is
held to prevent NETDEV_UP from linking, preventing the race window.
This bug was found following an additional audit with Claude Code based
on CVE-2025-38617. |
| In the Linux kernel, the following vulnerability has been resolved:
net: bcmasp: fix double free of WoL irq
We do not need to free wol_irq since it was instantiated with
devm_request_irq(). So devres will free for us. |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: nci: fix circular locking dependency in nci_close_device
nci_close_device() flushes rx_wq and tx_wq while holding req_lock.
This causes a circular locking dependency because nci_rx_work()
running on rx_wq can end up taking req_lock too:
nci_rx_work -> nci_rx_data_packet -> nci_data_exchange_complete
-> __sk_destruct -> rawsock_destruct -> nfc_deactivate_target
-> nci_deactivate_target -> nci_request -> mutex_lock(&ndev->req_lock)
Move the flush of rx_wq after req_lock has been released.
This should safe (I think) because NCI_UP has already been cleared
and the transport is closed, so the work will see it and return
-ENETDOWN.
NIPA has been hitting this running the nci selftest with a debug
kernel on roughly 4% of the runs. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: MGMT: Fix dangling pointer on mgmt_add_adv_patterns_monitor_complete
This fixes the condition checking so mgmt_pending_valid is executed
whenever status != -ECANCELED otherwise calling mgmt_pending_free(cmd)
would kfree(cmd) without unlinking it from the list first, leaving a
dangling pointer. Any subsequent list traversal (e.g.,
mgmt_pending_foreach during __mgmt_power_off, or another
mgmt_pending_valid call) would dereference freed memory. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: Validate PDU length before reading SDU length in l2cap_ecred_data_rcv()
l2cap_ecred_data_rcv() reads the SDU length field from skb->data using
get_unaligned_le16() without first verifying that skb contains at least
L2CAP_SDULEN_SIZE (2) bytes. When skb->len is less than 2, this reads
past the valid data in the skb.
The ERTM reassembly path correctly calls pskb_may_pull() before reading
the SDU length (l2cap_reassemble_sdu, L2CAP_SAR_START case). Apply the
same validation to the Enhanced Credit Based Flow Control data path. |
| In the Linux kernel, the following vulnerability has been resolved:
erofs: set fileio bio failed in short read case
For file-backed mount, IO requests are handled by vfs_iocb_iter_read().
However, it can be interrupted by SIGKILL, returning the number of
bytes actually copied. Unused folios in bio are unexpectedly marked
as uptodate.
vfs_read
filemap_read
filemap_get_pages
filemap_readahead
erofs_fileio_readahead
erofs_fileio_rq_submit
vfs_iocb_iter_read
filemap_read
filemap_get_pages <= detect signal
erofs_fileio_ki_complete <= set all folios uptodate
This patch addresses this by setting short read bio with an error
directly. |
| In the Linux kernel, the following vulnerability has been resolved:
af_key: validate families in pfkey_send_migrate()
syzbot was able to trigger a crash in skb_put() [1]
Issue is that pfkey_send_migrate() does not check old/new families,
and that set_ipsecrequest() @family argument was truncated,
thus possibly overfilling the skb.
Validate families early, do not wait set_ipsecrequest().
[1]
skbuff: skb_over_panic: text:ffffffff8a752120 len:392 put:16 head:ffff88802a4ad040 data:ffff88802a4ad040 tail:0x188 end:0x180 dev:<NULL>
kernel BUG at net/core/skbuff.c:214 !
Call Trace:
<TASK>
skb_over_panic net/core/skbuff.c:219 [inline]
skb_put+0x159/0x210 net/core/skbuff.c:2655
skb_put_zero include/linux/skbuff.h:2788 [inline]
set_ipsecrequest net/key/af_key.c:3532 [inline]
pfkey_send_migrate+0x1270/0x2e50 net/key/af_key.c:3636
km_migrate+0x155/0x260 net/xfrm/xfrm_state.c:2848
xfrm_migrate+0x2140/0x2450 net/xfrm/xfrm_policy.c:4705
xfrm_do_migrate+0x8ff/0xaa0 net/xfrm/xfrm_user.c:3150 |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: prevent policy_hthresh.work from racing with netns teardown
A XFRM_MSG_NEWSPDINFO request can queue the per-net work item
policy_hthresh.work onto the system workqueue.
The queued callback, xfrm_hash_rebuild(), retrieves the enclosing
struct net via container_of(). If the net namespace is torn down
before that work runs, the associated struct net may already have
been freed, and xfrm_hash_rebuild() may then dereference stale memory.
xfrm_policy_fini() already flushes policy_hash_work during teardown,
but it does not synchronize policy_hthresh.work.
Synchronize policy_hthresh.work in xfrm_policy_fini() as well, so the
queued work cannot outlive the net namespace teardown and access a
freed struct net. |
| In the Linux kernel, the following vulnerability has been resolved:
esp: fix skb leak with espintcp and async crypto
When the TX queue for espintcp is full, esp_output_tail_tcp will
return an error and not free the skb, because with synchronous crypto,
the common xfrm output code will drop the packet for us.
With async crypto (esp_output_done), we need to drop the skb when
esp_output_tail_tcp returns an error. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: set BTRFS_ROOT_ORPHAN_CLEANUP during subvol create
We have recently observed a number of subvolumes with broken dentries.
ls-ing the parent dir looks like:
drwxrwxrwt 1 root root 16 Jan 23 16:49 .
drwxr-xr-x 1 root root 24 Jan 23 16:48 ..
d????????? ? ? ? ? ? broken_subvol
and similarly stat-ing the file fails.
In this state, deleting the subvol fails with ENOENT, but attempting to
create a new file or subvol over it errors out with EEXIST and even
aborts the fs. Which leaves us a bit stuck.
dmesg contains a single notable error message reading:
"could not do orphan cleanup -2"
2 is ENOENT and the error comes from the failure handling path of
btrfs_orphan_cleanup(), with the stack leading back up to
btrfs_lookup().
btrfs_lookup
btrfs_lookup_dentry
btrfs_orphan_cleanup // prints that message and returns -ENOENT
After some detailed inspection of the internal state, it became clear
that:
- there are no orphan items for the subvol
- the subvol is otherwise healthy looking, it is not half-deleted or
anything, there is no drop progress, etc.
- the subvol was created a while ago and does the meaningful first
btrfs_orphan_cleanup() call that sets BTRFS_ROOT_ORPHAN_CLEANUP much
later.
- after btrfs_orphan_cleanup() fails, btrfs_lookup_dentry() returns -ENOENT,
which results in a negative dentry for the subvolume via
d_splice_alias(NULL, dentry), leading to the observed behavior. The
bug can be mitigated by dropping the dentry cache, at which point we
can successfully delete the subvolume if we want.
i.e.,
btrfs_lookup()
btrfs_lookup_dentry()
if (!sb_rdonly(inode->vfs_inode)->vfs_inode)
btrfs_orphan_cleanup(sub_root)
test_and_set_bit(BTRFS_ROOT_ORPHAN_CLEANUP)
btrfs_search_slot() // finds orphan item for inode N
...
prints "could not do orphan cleanup -2"
if (inode == ERR_PTR(-ENOENT))
inode = NULL;
return d_splice_alias(NULL, dentry) // NEGATIVE DENTRY for valid subvolume
btrfs_orphan_cleanup() does test_and_set_bit(BTRFS_ROOT_ORPHAN_CLEANUP)
on the root when it runs, so it cannot run more than once on a given
root, so something else must run concurrently. However, the obvious
routes to deleting an orphan when nlinks goes to 0 should not be able to
run without first doing a lookup into the subvolume, which should run
btrfs_orphan_cleanup() and set the bit.
The final important observation is that create_subvol() calls
d_instantiate_new() but does not set BTRFS_ROOT_ORPHAN_CLEANUP, so if
the dentry cache gets dropped, the next lookup into the subvolume will
make a real call into btrfs_orphan_cleanup() for the first time. This
opens up the possibility of concurrently deleting the inode/orphan items
but most typical evict() paths will be holding a reference on the parent
dentry (child dentry holds parent->d_lockref.count via dget in
d_alloc(), released in __dentry_kill()) and prevent the parent from
being removed from the dentry cache.
The one exception is delayed iputs. Ordered extent creation calls
igrab() on the inode. If the file is unlinked and closed while those
refs are held, iput() in __dentry_kill() decrements i_count but does
not trigger eviction (i_count > 0). The child dentry is freed and the
subvol dentry's d_lockref.count drops to 0, making it evictable while
the inode is still alive.
Since there are two races (the race between writeback and unlink and
the race between lookup and delayed iputs), and there are too many moving
parts, the following three diagrams show the complete picture.
(Only the second and third are races)
Phase 1:
Create Subvol in dentry cache without BTRFS_ROOT_ORPHAN_CLEANUP set
btrfs_mksubvol()
lookup_one_len()
__lookup_slow()
d_alloc_parallel()
__d_alloc() // d_lockref.count = 1
create_subvol(dentry)
// doesn't touch the bit..
d_instantiate_new(dentry, inode) // dentry in cache with d_lockref.c
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
HID: apple: avoid memory leak in apple_report_fixup()
The apple_report_fixup() function was returning a
newly kmemdup()-allocated buffer, but never freeing it.
The caller of report_fixup() does not take ownership of the returned
pointer, but it *is* permitted to return a sub-portion of the input
rdesc, whose lifetime is managed by the caller. |
