| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
rust_binder: call set_notification_done() without proc lock
Consider the following sequence of events on a death listener:
1. The remote process dies and sends a BR_DEAD_BINDER message.
2. The local process invokes the BC_CLEAR_DEATH_NOTIFICATION command.
3. The local process then invokes the BC_DEAD_BINDER_DONE.
Then, the kernel will reply to the BC_DEAD_BINDER_DONE command with a
BR_CLEAR_DEATH_NOTIFICATION_DONE reply using push_work_if_looper().
However, this can result in a deadlock if the current thread is not a
looper. This is because dead_binder_done() still holds the proc lock
during set_notification_done(), which called push_work_if_looper().
Normally, push_work_if_looper() takes the thread lock, which is fine to
take under the proc lock. But if the current thread is not a looper,
then it falls back to delivering the reply to the process work queue,
which involves taking the proc lock. Since the proc lock is already
held, this is a deadlock.
Fix this by releasing the proc lock during set_notification_done(). It
was not intentional that it was held during that function to begin with.
I don't think this ever happens in Android because BC_DEAD_BINDER_DONE
is only invoked in response to BR_DEAD_BINDER messages, and the kernel
always delivers BR_DEAD_BINDER to a looper. So there's no scenario where
Android userspace will call BC_DEAD_BINDER_DONE on a non-looper thread. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86/mmu: Drop/zap existing present SPTE even when creating an MMIO SPTE
When installing an emulated MMIO SPTE, do so *after* dropping/zapping the
existing SPTE (if it's shadow-present). While commit a54aa15c6bda3 was
right about it being impossible to convert a shadow-present SPTE to an
MMIO SPTE due to a _guest_ write, it failed to account for writes to guest
memory that are outside the scope of KVM.
E.g. if host userspace modifies a shadowed gPTE to switch from a memslot
to emulted MMIO and then the guest hits a relevant page fault, KVM will
install the MMIO SPTE without first zapping the shadow-present SPTE.
------------[ cut here ]------------
is_shadow_present_pte(*sptep)
WARNING: arch/x86/kvm/mmu/mmu.c:484 at mark_mmio_spte+0xb2/0xc0 [kvm], CPU#0: vmx_ept_stale_r/4292
Modules linked in: kvm_intel kvm irqbypass
CPU: 0 UID: 1000 PID: 4292 Comm: vmx_ept_stale_r Not tainted 7.0.0-rc2-eafebd2d2ab0-sink-vm #319 PREEMPT
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
RIP: 0010:mark_mmio_spte+0xb2/0xc0 [kvm]
Call Trace:
<TASK>
mmu_set_spte+0x237/0x440 [kvm]
ept_page_fault+0x535/0x7f0 [kvm]
kvm_mmu_do_page_fault+0xee/0x1f0 [kvm]
kvm_mmu_page_fault+0x8d/0x620 [kvm]
vmx_handle_exit+0x18c/0x5a0 [kvm_intel]
kvm_arch_vcpu_ioctl_run+0xc55/0x1c20 [kvm]
kvm_vcpu_ioctl+0x2d5/0x980 [kvm]
__x64_sys_ioctl+0x8a/0xd0
do_syscall_64+0xb5/0x730
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x47fa3f
</TASK>
---[ end trace 0000000000000000 ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86/mmu: Only WARN in direct MMUs when overwriting shadow-present SPTE
Adjust KVM's sanity check against overwriting a shadow-present SPTE with a
another SPTE with a different target PFN to only apply to direct MMUs,
i.e. only to MMUs without shadowed gPTEs. While it's impossible for KVM
to overwrite a shadow-present SPTE in response to a guest write, writes
from outside the scope of KVM, e.g. from host userspace, aren't detected
by KVM's write tracking and so can break KVM's shadow paging rules.
------------[ cut here ]------------
pfn != spte_to_pfn(*sptep)
WARNING: arch/x86/kvm/mmu/mmu.c:3069 at mmu_set_spte+0x1e4/0x440 [kvm], CPU#0: vmx_ept_stale_r/872
Modules linked in: kvm_intel kvm irqbypass
CPU: 0 UID: 1000 PID: 872 Comm: vmx_ept_stale_r Not tainted 7.0.0-rc2-eafebd2d2ab0-sink-vm #319 PREEMPT
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
RIP: 0010:mmu_set_spte+0x1e4/0x440 [kvm]
Call Trace:
<TASK>
ept_page_fault+0x535/0x7f0 [kvm]
kvm_mmu_do_page_fault+0xee/0x1f0 [kvm]
kvm_mmu_page_fault+0x8d/0x620 [kvm]
vmx_handle_exit+0x18c/0x5a0 [kvm_intel]
kvm_arch_vcpu_ioctl_run+0xc55/0x1c20 [kvm]
kvm_vcpu_ioctl+0x2d5/0x980 [kvm]
__x64_sys_ioctl+0x8a/0xd0
do_syscall_64+0xb5/0x730
entry_SYSCALL_64_after_hwframe+0x4b/0x53
</TASK>
---[ end trace 0000000000000000 ]--- |
| Privilege escalation in the Graphics: WebRender component. This vulnerability was fixed in Firefox 150, Firefox ESR 115.35, Firefox ESR 140.10, Thunderbird 150, and Thunderbird 140.10. |
| In versions <8.4.0, <8.3.2, <8.2.2, <8.1.3, <8.0.4, <7.13.6, <7.12.7, <7.11.7, and <7.10.10, the endpoints /api/apps/logs and /api/apps/:id/logs have a typo in the required permission check, allowing authenticated users without the proper permissions to read apps-engine logs. |
| Flowise is a drag & drop user interface to build a customized large language model flow. Prior to 3.1.0, The CSVAgent allows providing a custom Pandas CSV read code. Due to lack of sanitization, an attacker can provide a command injection payload that will get interpolated and executed by the server. This vulnerability is fixed in 3.1.0. |
| Flowise is a drag & drop user interface to build a customized large language model flow. Prior to 3.1.0, the specific flaw exists within the run method of the CSV_Agents class. The issue results from the lack of proper sandboxing when evaluating an LLM generated python script. An attacker can leverage this vulnerability to execute code in the context of the user running the server. Using prompt injection techniques, an unauthenticated attacker with the ability to send prompts to a chatflow using the CSV Agent node may convince an LLM to respond with a malicious python script that executes attacker controlled commands on the Flowise server. This vulnerability is fixed in 3.1.0. |
| Flowise is a drag & drop user interface to build a customized large language model flow. Prior to 3.1.0, the specific flaw exists within the run method of the Airtable_Agents class. The issue results from the lack of proper sandboxing when evaluating an LLM generated python script. Using prompt injection techniques, an unauthenticated attacker with the ability to send prompts to a chatflow using the Airtable Agent node may convince an LLM to respond with a malicious python script that executes attacker controlled commands on the flowise server. This vulnerability is fixed in 3.1.0. |
| Flowise is a drag & drop user interface to build a customized large language model flow. Prior to 3.1.0, an improper mass assignment (JSON injection) vulnerability in the account registration endpoint of Flowise Cloud allows unauthenticated attackers to inject server-managed fields and nested objects during account creation. This enables client-controlled manipulation of ownership metadata, timestamps, organization association, and role mappings, breaking trust boundaries in a multi-tenant environment. This vulnerability is fixed in 3.1.0. |
| Flowise is a drag & drop user interface to build a customized large language model flow. Prior to 3.1.0, Flowise is vulnerable to a critical unauthenticated remote command execution (RCE) vulnerability. It can be exploited via a parameter override bypass using the FILE-STORAGE:: keyword combined with a NODE_OPTIONS environment variable injection. This allows for the execution of arbitrary system commands with root privileges within the containerized Flowise instance, requiring only a single HTTP request and no authentication or knowledge of the instance. This vulnerability is fixed in 3.1.0. |
| An issue was discovered in ToToLink A3300R firmware v17.0.0cu.557_B20221024 allowing attackers to execute arbitrary commands via the password parameter to /cgi-bin/cstecgi.cgi. |
| An issue was discovered in ToToLink A3300R firmware v17.0.0cu.557_B20221024 allowing attackers to execute arbitrary commands via the provider parameter to /cgi-bin/cstecgi.cgi. |
| An issue was discovered in ToToLink A3300R firmware v17.0.0cu.557_B20221024 allowing attackers to execute arbitrary commands via the pppoeMtu parameter to /cgi-bin/cstecgi.cgi. |
| An issue was discovered in ToToLink A3300R firmware v17.0.0cu.557_B20221024 allowing attackers to execute arbitrary commands via the pppoeServiceName parameter to /cgi-bin/cstecgi.cgi. |
| An issue was discovered in ToToLink A3300R firmware v17.0.0cu.557_B20221024 allowing attackers to execute arbitrary commands via the url parameter to /cgi-bin/cstecgi.cgi. |
| An issue was discovered in ToToLink A3300R firmware v17.0.0cu.557_B20221024 allowing attackers to execute arbitrary commands via the user parameter to /cgi-bin/cstecgi.cgi. |
| An issue was discovered in ToToLink A3300R firmware v17.0.0cu.557_B20221024 allowing attackers to execute arbitrary commands via the informEnable parameter to /cgi-bin/cstecgi.cgi. |
| An issue was discovered in ToToLink A3300R firmware v17.0.0cu.557_B20221024 allowing attackers to execute arbitrary commands via the stunEnable parameter to /cgi-bin/cstecgi.cgi. |
| Tianxin Internet Behavior Management System contains a command injection vulnerability in the Reporter component endpoint that allows unauthenticated attackers to execute arbitrary commands by supplying a crafted objClass parameter containing shell metacharacters and output redirection. Attackers can exploit this vulnerability to write malicious PHP files into the web root and achieve remote code execution with the privileges of the web server process. This vulnerability has been fixed in version NACFirmware_4.0.0.7_20210716.180815_topsec_0_basic.bin. Exploitation evidence was first observed by the Shadowserver Foundation on 2024-06-01 (UTC). |
| An issue was discovered in ToToLink A3300R firmware v17.0.0cu.557_B20221024 allowing attackers to execute arbitrary commands via the stun_user parameter to /cgi-bin/cstecgi.cgi. |
